What happened to the last outpost after the war?
300 years after the Great War, a small group of scientists are awakened from a deep cryosleep within the heart of a laboratory multiplex. Many such outposts were originally built for the survival and future of the planet, but during the conflict, most were destroyed. This is the final outpost.
Is this the final outpost in the multiplex?
This is the final outpost. Data collected by the multiplex’s fleet of automated caretakers over the last few centuries reveals a stark truth. Following the destruction caused by the Great War, 90% of biodiversity was lost on the planet. All that remain are a few species that were strong enough to survive in the desolate wastelands.
What to do if you find a hole in the wall?
If the hole is just a few inches wide, shine a flashlight into it to see what’s there. If you must enlarge the hole, carefully cut horizontally with a drywall saw—but avoid going deeper than an inch.
How to use joint compound to repair damaged walls?
Also, for joint compound to appear flush with the wall near the damage site, “feather” the mud as you apply it. Hold the knife at a 70-degree angle, pressing harder on the outer edges of the mud as you move away from the center. DON’T skimp on sanding. If you cut corners on sanding, the repair site will be noticeable, so take your time.
How do you get more citizens in final outpost?
Upgrade The Base To Increase Population Upgrade the base to increase the population and storage limit for the wood, wood, and metal scraps. Increasing the population will give you more workers to assign to jobs like a lumberjack, farmer, etc. Construct Housing to increase citizen capacity.
How do I upgrade my base outpost final?
5:297:53Complete Guide: Starting Final Outpost 1.3 - YouTubeYouTubeStart of suggested clipEnd of suggested clipGot your final outpost kind of up off the ground. You start running into the things that there'sMoreGot your final outpost kind of up off the ground. You start running into the things that there's more things to upgrade to prepare for what is coming than it is building things however you do have to
How do you upgrade outpost slots in State of Decay 2?
There are 3 main steps to acquiring the maximum amount of 8 outpost slots in State of Decay 2....Step 1: Find the Command Centre and upgrade it to level 3'Knowledge of Computers' skill.A Power outpost.Scraps of Circuitry.Materials.3 survivors for labor.
How do you upgrade your base in state of decay?
1:033:22State of Decay: How To Upgrade Your Base (Tips And Tricks) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then make a workshop set up workshop. And what a workshop will do is that automatically repairsMoreAnd then make a workshop set up workshop. And what a workshop will do is that automatically repairs and resource weapons everyday.
How do you increase base slots in State of Decay 2?
0:533:07State of Decay 2 - How To Get More Outposts & Slots - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou go you just purchase the outpost. And it's yours some of the outpost will require differentMoreYou go you just purchase the outpost. And it's yours some of the outpost will require different requirements some of them will require different. Like a different amount of people.
How do you upgrade the command center in state of decay?
To get more Outposts in State of Decay 2 you need to upgrade your Command Post in your base. Each base has a Command Post in a different spot. When you find the post, select it and scroll over to the upgrade selection and upgrade it.
Upgrading vs new builds
You should always pay attention to costs and benefits when it comes to deciding if you should upgrade existing buildings or buy new ones.
Get better materials by upgrading the Scrap pile
In order to unlock better upgrades, you need better materials. And the way to get those is by upgrading your Scrap Pile.
Focus on producing enough food
Food is extremely important throughout the game, but early on it’s the most important thing and probably the most difficult one to get.
Remove all jobs over the night
Although a pretty annoying thing to do, it’s something that you should do especially early on in the game when resources are scarce.
Focus on surviving the Red Nights
Every five days, you get a red night, which means that a huge amount of zombies will get past your camp.
Micromanage workers
You should always micromanage workers and switch jobs based on the needs that you have. Also, remember that some jobs require more time to be completed than others, while everybody stops working at 19:00, no matter where their progress with the current job is.
Buy extra stuff to support this game!
This great game can be definitely played and enjoyed without ever seeing an ad or without making a single in-app purchase, that’s true.
How to cut mesh tape?
Use a box cutter or other sharp blade to cut random strands of mesh tape or frayed edges of wallboard paper around holes or cracks before applying joint compound. Otherwise your finished work will show bumps and other blemishes.
How to repair a sanded area?
If you cut corners on sanding, the repair site will be noticeable, so take your time. Once the repaired area is dry, use a fine-grit (100 or 120) sandpaper. After the first round of sanding, add a second layer of mud, spreading it about 2 inches beyond the boundaries of the first layer. Once dry, re-sand.
Do you need a mask when sanding drywall?
DO use protection. The fine particulate of drywall compound could injure your lungs if inhaled. So always wear a dust mask when sanding drywall compound. Disposable gloves are also a good idea to protect your hands from the dehydrating effects of gypsum dust.
Is drywall indestructible?
Drywall is tough, but it’s not indestructible. Over time, gypsum-board walls can sustain ugly cracks or holes. Fortunately, drywall is fairly easy to repair, but there is an art to it. Here’s what to do—and what to avoid—when fixing drywall damage so it’s indiscernible to landlords, homebuyers, or visitors.
Is joint compound easier to sand?
DO keep it light. Less is generally more when it comes to joint compound. A thin coat is easier to sand, and you’ll be less likely to remove too much while sanding and expose the patch. Also, for joint compound to appear flush with the wall near the damage site, “feather” the mud as you apply it.
Is it safe to put hot wires in an outlet?
It’s safe to assume that hot wires will be present near an electrical outlet, but don’t bet your life—or life savings— that homebuilders or renovators followed all electrical and plumbing codes. Wires and pipes are often found where they don’t belong.
