Driveway repair cost
| Project | Cost per square foot |
| Asphalt driveway repaving | $3 – $7 |
| Brick driveway repair | $2 – $8 |
| Cobblestone driveway repair | $8 – $20 |
| Gravel driveway repair | $0.25 – $2.20 |
How much does it cost to repair a gravel driveway?
How Much Does It Cost To Repair A Driveway?
- Driveway Repair Costs By Type. Tiny cracks can appear in even the best laid concrete driveways. ...
- Costs to Fix Common Issues. The averages cost for concrete work is $3 to $5 per square foot. ...
- Factors Affecting Price. The length and width of your drive is a huge variable. ...
Is repaving a driveway worth the cost?
Revamping the driveway is one way to do both—and it could even add value to your home, depending on the market, typical homes in your area and the type of material you choose. A driveway paving cost is $4,740 on average, according to HomeAdvisor, but the price tag can vary depending on various factors. Here’s what to know before you dig in.
How much does it cost to gravel a driveway?
you’ll need to know how much a new driveway costs. Your overall driveway design has a major impact on the appearance of the front yard, so it’s important to select the right material, be that concrete, gravel, pavers or another option. But the ...
How much to repave a driveway?
The average cost to repave an asphalt driveway is $4 to $10 per square foot with a new gravel base or $3 to $7 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,600 to $4,000 on average. Repaving includes removing and hauling away the existing asphalt. *A new sub-base is not always required.
How long do gravel driveways last?
100 yearsWith proper care and maintenance, a gravel driveway can last up to 100 years. The beauty of gravel is that it can be repaired and replenished on an ongoing basis. By contrast, wear and damage to asphalt and concrete driveways are difficult to remedy and replacement is often more cost-effective than extensive repairs.
How do you fix an eroding gravel driveway?
Walk your driveway regularly, rake in hand, looking for potential problems. Rake out any trash or loose plant matter, such as leaves and limbs, scrape off soil buildup along the sides, replace missing or damaged edging, fill depressions with fresh gravel and reshape the crown as needed.
Is it cheaper to pave or gravel a driveway?
A gravel driveway is a more budget-friendly option than paving with concrete, which runs from $4 to $15 per square foot.
What is the cheapest type of driveway?
gravelAggregate, or gravel, is the cheapest and most durable of these four common driveway materials.
How do you fix a low spot in a gravel driveway?
1:573:14How to Fill And Level A Low Spot With Gravel | John Deere Tips NotebookYouTubeStart of suggested clipEnd of suggested clipComes out of the box filling the low spot then the box begins to fill up again and gravel continuesMoreComes out of the box filling the low spot then the box begins to fill up again and gravel continues to be spread evenly after a few passes the gravel in the filled.
How do you fix a recurring pothole in a gravel driveway?
0:122:08Repairing Potholes 101 - Gravel Driveway Maintenance by ABIYouTubeStart of suggested clipEnd of suggested clipThe only effective way of removing a pothole is to rip apart compacted sidewalls that sheep the holeMoreThe only effective way of removing a pothole is to rip apart compacted sidewalls that sheep the hole. If. You simply push material back into the vehicles.
Can you Snowblow a gravel driveway?
Can a snowblower be used on gravel driveways? The short answer to this question is yes; snow blowers can work on gravel driveways. Snowblowers are machines, designed in a way similar to mini-tractors or lawnmowers and can effectively do the heavy lifting, especially when you have a massive snowfall.
Are gravel driveways worth it?
Gravel. Pros: Gravel is a great option for the budget-conscious, especially people with longer driveways, Bean says. Another selling point: “Gravel compacts much better than plain rocks,” creating a more stable surface that sheds water easily, Bean says.
Can you pour concrete over gravel driveway?
Cement mix might work in some cases over an existing gravel driveway. Laying a concrete driveway over an existing gravel one is possible, but it is not generally recommended. The kind of gravel that is intended to go under cement is typically a smaller grade than what is used for gravel driveways.
What is a cheaper alternative to gravel?
Brick is one of the alternatives to a concrete driveway that looks great and won't cost you much. It can be semi-permeable if laid over sand and comes in many styles. Loose gravel makes for one of the cheapest driveway alternatives, though it can be high-maintenance when compared to other asphalt driveway alternatives.
Which gravel is best for driveways?
These are the best options for driveway surfaces gravel, because they are small stones combined with rock dust, which makes a more solid driving surface.Crushed Stone #411. It is crushed up #57 stone combined with rock dust. ... Quarry Process. ... Pea Gravel. ... Jersey Shore Gravel. ... Marble Chips. ... Blackstar or Blacktrap Rock.
What's the cheapest way to resurface a driveway?
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway's sub-base is sound.
Can you put new gravel over old?
So long as you're going to use the same type of gravel it'll look fine - mine did. @sam_mirfin You don't need to put down a new fabric sheet, just lay your slate chippings in a deep enough layer on top of the old gravel - it will be fine like the others say.
How do I stop my gravel road washout?
Ensuring your driveway or gravel road has proper drainage is the first step towards preventing a washout. Drainage ditches along the sides of the driveway or road provide a place for excess water to flow. Ditches direct the water to the sewer or another exit root such as a stream on the property.
Can you pour quikrete over gravel driveway?
0:012:47brushing CHEAP concrete onto a gravel driveway (adding ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is mortar mix um for a dollar it will work perfectly.MoreThis is mortar mix um for a dollar it will work perfectly.
How much does it cost to fix a crack in a concrete driveway?
The average cost to repair cracks in a concrete driveway is $0.50 to $3 per linear foot. Minimum service fees of $100 to $250 apply to patch, seal, and fix cracks. Driveway crack filler costs $5 to $10 per bottle to repair 24 linear feet of cracks less than a 1/4" wide yourself.
How much does it cost to repair a cobblestone driveway?
Repairing a cobblestone driveway costs $8 to $20 per square foot to replace individual stones and $3 to $5 per square foot for sand to fill and level sunken areas. Settling is the most common problem with cobblestone. Pros charge $6 to $12 per square foot to relevel large areas.
How old should a driveway be to replace it?
Age – Homeowners should consider replacing asphalt driveways older than 15 to 20 years and concrete driveways older than 25 years. After so many years, the foundation begins to deteriorate, and problems are more likely to recur even after repairs.
How much does it cost to replace brick pavers?
Brick pavers cost $0.50 to $1.80 per brick or $2 to $8 per square foot. One benefit of brick paver driveways is that damaged bricks can be replaced individually. Level sunken areas by removing the pavers, filling the space with sand, and compacting the sand until it's flat.
How much does it cost to level a driveway?
Driveway leveling costs $600 to $1,200 to lift a small sinking section or $1,400 to $2,700 to level an entire driveway. Filling and leveling small surface areas costs $2 to $5 per square foot. Sinking, settling, and buckling are caused by water damage, tree roots, and foundation problems.
How much does it cost to patch a pothole?
Filling or repairing potholes costs $100 to $400 on average, depending on the size, depth, extent of the damage, and repair method. Patching costs $25 to $40 per pothole plus $100 to $250 to bring the equipment and crew to the job site.
How much does it cost to install a gravel driveway?
A gravel driveway costs $1 to $3 per square foot to install. A 12×25 (1-car) gravel driveway costs $300 to $900, and a 24×24 (2-car) driveway is $600 to $1,800. Costs depend on the size and depth, gravel type, soil conditions, labor, excavation, grading, permits, and optional grid stabilization.
How much does it cost to build a gravel road?
The average cost to build a gravel road is $4 to $12 per linear foot depending on the road width and depth, soil conditions, labor rates, and choice of materials. Building a long private gravel road leading up to your property costs $21,000 to $65,000 per mile.
How much does a caliche driveway cost?
A caliche driveway is $1.17 to $6.62 per cubic foot, which is $31 to $178 per cubic yard, or $48 to $253 per ton. The cheapest caliche is available near the deserts it comes from in the Southwestern United States.
How much does a white gravel driveway cost?
A white gravel driveway costs $2.77 to $4.80 per square foot, $30 to $120 per cubic yard, or $20 to $100 per ton for less-expensive white stones up to 1". A white rock driveway is available in crushed granite, white quartz blends, limestone, and sometimes pea gravel. White gravel shimmers in the light, and can cause a glare on sunny days.
How long does a gravel driveway last?
A gravel driveway with a well-built foundation can last for up to 100 years if well-maintained.
How much does gravel cost?
Gravel prices for a driveway range from $10 to $50 per ton or $15 to $75 per yard depending on the rock type, volume ordered, and delivery fees. When including delivery, spreading, and compacting, driveway stone and rock costs $100 to $120 per ton installed.
How much does it cost to build a crushed limestone driveway?
A crushed limestone driveway costs $1.50 to $2 per cubic foot , $40 to $54 per cubic yard, or $30 to $38 per ton for up to 1" stones. Crushed stone gravel can come in any color, though most popular crushed stone blends are in neutral, earth-toned colors.
How much is 2" to 3" stone per square foot?
Middle layer: 2” to 3” stone is spread to a depth of 3-4 inches. 2” to 3” stone layer: $0.35-$0.45 per square foot. Top layer: Road gravel, crushed stone or pea stone is spread to a depth of 2-3 inches.
Where is the Dawsonville driveway?
This driveway is a good representation of the majority of gravel drives. The home is in Dawsonville, Georgia. It is built on land that was once farmland, but only used for hunting in the last 20 years. Light woods had grown up that needed to be removed in the driveway path.
Can you replace a concrete driveway with gravel?
Replacing an old asphalt or concrete drive with gravel doesn’t happen often, but if that’s what you’re doing, the cost will be the highest among the scenarios. Heavy equipment is used to break up the existing material and load it into trucks. It is then hauled away for disposal or recycle/reuse.
Is it cheaper to replace a gravel driveway with a concrete driveway?
That said, as with every type of driveway, the final price you pay will be dictated by the amount of preparation and work to be done. Replacing an existing gravel driveway will be much cheaper than removing an old concrete driveway before laying gravel.
Tips for Concrete Driveway Repair
Even if your driveway is an expanse of puddles and potholes, it pays to explore repairing it first, DIY. It's a simple matter of dollars. For example, an asphalt topcoat costs about $2 per square foot - roughly a third of the tab for a complete driveway redo that includes soil prep, gravel, and two coats of asphalt.
Tips for Asphalt Driveway Repair
As with concrete, clean cracks of plants and debris, hose them clean and spray them with weed killer. Then do your patching when temperatures are at least 60°F so the repair material will cure. Fill 1/2-in. cracks with sand to within 1/4 in.
What to Know About Replacing a Driveway
Large areas of concrete can't be resurfaced reliably, so your contractor will have to break up the old slab and pour a new one.
Driveway Surface Options
What's out there: Choices include plain concrete; concrete colored with pigments or acid-staining; colored and stamped concrete that mimics stone; and exposed aggregate that allows the top layer of textured gravel to show through.
How much does it cost to repair a brick driveway?
Brick driveway repairs generally require replacement of the damaged bricks. Individual bricks can be found for anywhere from $0.35 to $0.75, while sand is between $20 and $30 per 50 pound bag. It's a beautiful and decorative material, but it takes its share of abuse over time. Tree limbs fall and fracture it.
How much does it cost to install a concrete driveway?
Hiring a professional to do this will be around $2.25 per square foot, or about $1,600 for 750 square feet.
How much of a driveway needs to be patched?
A few small cracks and limited patching takes less time and effort than work on a more extensive area. It's a good rule of thumb that if more than 25 percent of your driveway needs to be repaired or patched, repaving and replacing, or resurfacing, is a better idea.
What is the cheapest driveway to install?
This price can vary drastically depending on the type of material, quality, and quantity purchased. While dirt, sand, clay, and gravel driveways are the cheapest to install, they require maintenance and can incur damages during storms. Potholes commonly occur when water gets trapped under the surface.
How much does a gravel driveway cost?
A gravel driveway costs as little as $300 or as much as $60,000 for an extra-long driveway . The average cost for a 16- by 38-foot gravel driveway is $1,500. A gravel driveway can be a functional, budget-friendly feature for any home. If you’re interested in an alternative to an asphalt or concrete driveway, gravel may be the way to go.
Why does the price of a new gravel driveway change?
This price can change because of local labor costs, the difficulty of the job, and the geographic area. Labor rates typically include the cost of supplies and equipment, but check with your contractor. If the new gravel driveway is replacing a paved driveway, prepare to pay more for removal.
What is crushed granite?
Commonly used as the top layer for a gravel driveway , crushed granite is a mixture of finely crushed granite and stone dust. The fine texture of the dust will settle between the stones and provide a smooth, tightly packed, and long-lasting driveway surface. Crushed granite, or decomposed granite, can come in various colors depending on where it was sourced. It usually costs around $25 to $50 per ton.
How much does pea gravel cost?
Crushed clamshells or plain pea gravel costs around $40 per cubic yard or $50 per ton. If you buy pea gravel in bulk, you may qualify for a discount. Crushed stone runs approximately $55 per cubic yard and $65 per ton. Colored gravel can add an extra $20 to $50 per unit.
What is the best gravel driveway base?
Along with base #1, base gravel #3 is considered one of the best gravel driveway bases. Item #4 is another standard base layer for gravel driveways. Item #4 is usually made of crushed gravel, dirt, and sand, but it can sometimes contain recycled asphalt, bluestone, or limestone. Item #4 costs between $12 and $22 a ton.
How to calculate the square footage of a driveway?
Multiply the length and the width of the driveway to find the square footage: 16 feet x 38 feet = 608 square feet. To find the total cubic feet, multiply the total depth (1 foot) by the area (608 square feet) to get the total volume of gravel needed (608 cubic feet).
How much does it cost to build a driveway?
Land preparation costs can run from $450 to $8,500 or between $1.30 and $2 per square foot, with the average at $2,600. Tree removal costs between $80 and $1,650 or $660 on average. Stump removal can cost between $60 to $360 per stump or $2 to $4 per inch of diameter. If you need extensive land clearing to build the driveway, expect to pay around $400 an hour or between $500 and $3,000 per acre if it’s a heavily wooded location. Digging and excavating to install a gravel driveway can cost $1 to $2 per square foot, depending on the terrain and the condition of the land. Grading a gravel driveway can run between $4 and $8 per square foot, and the cost to grade and excavate an average-size driveway will cost around $700 to $2,500. Some installation companies may include grading and excavating costs in the overall price of a gravel driveway project. Be advised that they may charge extra to haul away the excavated dirt or move it to a different area on your request.
How much does it cost to repair a pitted concrete driveway?
If the driveway wasn’t finished correctly or the concrete mix wasn’t properly prepared, pitting may also occur. Patches could be used to fix pitted concrete at a cost of $1.75 to $2.00 per square foot. Repairing a 100 square foot section of a pitted driveway will cost between $175 and $200.
What is concrete driveway repair?
Repairing a concrete driveway is more than just a cosmetic improvement. Concrete driveway repairs may be done to fix underlying issues such as sunken slabs and hairline cracks. To confirm the integrity of a concrete driveway, hire a professional to address significant surface issues.
How to tell if a concrete driveway is pitted?
Pitted concrete occurs as a result of small, deep holes in the driveway. A sign of a pitted driveway is jagged lines in a compressed area. Pitting occurs naturally over time and is seen in driveways that are several decades old. If the driveway wasn’t finished correctly or the concrete mix wasn’t properly prepared, pitting may also occur. Patches could be used to fix pitted concrete at a cost of $1.75 to $2.00 per square foot. Repairing a 100 square foot section of a pitted driveway will cost between $175 and $200.
Why replace a concrete driveway?
Replacing a concrete driveway is a consideration if extensive structural damage has occurred. Large cracks and sunken slabs are two potential reasons that a homeowner chooses to replace instead of repair the driveway. A repaving company is hired for the job of replacing the driveway.
Why does my driveway crack?
Concrete can crack or sink due to severe weather changes, poor installation, and increased exposure to moisture. Professionals evaluate the severity of the problem to recommend the best solutions.
How much does it cost to build a driveway apron?
With an average measurement of 10 to 15 square feet, the project cost is $110 to $140 for 10 to 15 square feet including labor and materials.
How much does it cost to patch a hairline crack?
The contractor may have the option to use a compound patch to address hairline cracks. Expect to pay around $1.75 to $2.00 per square foot for patches on a concrete driveway.
Cost Factors for Installing a Gravel Driveway
More cost factors can affect the price tag of your new gravel driveway beyond necessary procedures. Some of the cost factors in question are relatively minor. They won’t force you to alter your spending plans that much.
How Much Does a Gravel Driveway Cost?
Gravel driveways cost an average of $1,225 but can cost up to roughly $2,400. The total cost is based mostly on the size of the driveway, as well as labor. Countless builder-owners choose gravel driveways due to how much cheaper they are than other materials, such as concrete and asphalt.
Cost Per Square Foot Gravel Driveway
Gravel driveways cost an average of $1.50 per square foot including installation, and the average driveway is 640 square feet. A 640 square foot driveway is often a 2 car driveway, but single car driveways can be as small as 200-300 square feet, or smaller.
Gravel Driveway Material
Besides the gravel itself, there are many materials that go into a gravel driveway, and they’re all low cost. There are several options to choose between for what kind of gravel driveway you want.
Gravel Driveway Labor Cost
Professionals may charge you $25-$35 per hour for labor for gravel driveway installation. It can take between 2 and 4 ½ hours to install a gravel driveway. Sometimes, the labor rate applies to each person on the job, and other times it is general.
Replace Concrete With Gravel
You can choose to replace an existing concrete driveway with gravel, and it’s not a bad idea. However, replacing a driveway carries added costs that you wouldn’t have with installing a brand new one.
Gravel Driveway vs. Concrete
Gravel and concrete sit at opposite ends of the driveway material price range. Whereas gravel is cheap, easy to install, and permeable, concrete driveways are more complex and more expensive to install.
