Most repairs fall into five categories:
| Part | Repair Cost | Price Installed New |
| Broken Sprayer Heads | $10–$90 | $1–$20 |
| Faulty Valves | $100–$200 | $38–$195 |
| Damaged Backflow Preventer | $25–$420 | $222–$1,076 |
| Broken or Leaking Pipes | $15–$500 | $34–$80/linear foot |
How much does it cost to repair a sprinkler head?
The total price depends on these factors:
- property size
- linear feet of existing setup
- depth and position of pipes
- how much you intend to change the design
- if you're going to put in a new one at the same time
How much does it cost to move sprinkler heads?
The cost to install additional sprinkler heads is between $94 and $103. Replacing or relocating sprinkler heads for your entire lawn will cost about $400. Subsequently, question is, how do I permanently remove a sprinkler head?
How much does a fire sprinkler head cost?
This consists of sprinkler heads that cost between $1 and $33 per piece, valves, and gauges that range from $9 to $55 apiece as well as pumps and switches that cost about $15 to $60 per piece. New commercial property owners should expect to pay $1 to $2 per square foot, which includes both installation and equipment costs.
How much does an average sprinkler system cost?
The average cost of a sprinkler system is between 450 to $500 per Zone this includes labor. Most homeowners can do it themselves but what homeowners do not realize is there are laws and regulations governing irrigation, for example backflow and backflow prevention.
How do you fix a broken sprinkler head?
0:162:34FIX THIS: How to fix a broken sprinkler head - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat it's around the sprinkler head you'll put these back when you're done carefully unscrew the oldMoreThat it's around the sprinkler head you'll put these back when you're done carefully unscrew the old sprinkler head making sure no dirt or rocks get back in the line.
Can I replace just the sprinkler head?
0:354:51Replace SPRINKLER HEAD in 5 Minutes - Rainbird - Hunter - OrbitYouTubeStart of suggested clipEnd of suggested clipSo if you've got big patches of dead grass that are near a sprinkler head that used to look good goMoreSo if you've got big patches of dead grass that are near a sprinkler head that used to look good go ahead and just replace the head. Only need a few things you'll need a replacement sprinkler.
How often should lawn sprinkler heads be replaced?
between 10 to 15 yearsAs for its components taken separately, good quality heads will last you anywhere between 10 to 15 years, while inexpensive ones will only be good for 2 or 3 years. Nozzles should usually be replaced after two years, depending on water quality and climate.
Will a broken sprinkler head leak water?
The leak may be at one or more of the sprinkler heads in the zone. Or, the leak could pour out a line if there is a crack or hole in it. These leaks are more serious than the grading problem because they can waste a lot of water and can go undetected.
How do you replace a sprinkler head without digging?
1:194:10How to replace a sprinkler head without digging - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you can slowly unscrew the head in place without having any special tools. And just keepMoreAnd you can slowly unscrew the head in place without having any special tools. And just keep rotating it until the collar is totally loose.
How do I find a broken sprinkler head?
Use a metal detector to find buried sprinkler heads. Many valves have metal parts you can locate by running the metal detector over the surface of the ground. Valves are located directly under sprinkler heads.
Do I need to turn off water to replace sprinkler head?
Turn Off Water System - Before beginning your installation it is so important to make sure that your water system is shut off properly. If you don't get your water shut off before the installation process you will have water spraying everywhere.
Why do sprinkler heads break?
Any water that remains inside of the sprinkler heads may begin to freeze, which causes them to expand. This results in breaks and cracks that require you to replace the heads.
What is the average life of a sprinkler head?
While different parts of your system may need replacing throughout its life, you can expect the average sprinkler system to last for upwards of 20 years. During that time, you'll likely need to replace your sprinkler heads around the 10-year mark if using high-quality heads.
Why do sprinkler heads leak when off?
The most common reason is called “Low Head Drainage”. "Low Head Drainage" occurs when the lowest head on a zone allows water to drain from the lateral piping, out of the sprinkler. If it is low head drainage, residual water will stop flowing after all the water has left the pipe.
How do I know if my sprinkler head is bad?
One of the most common problems with a lawn irrigation system is when sprinkler heads get damaged, which is usually easy to spot....Look for:Damage to the plastic casing on the sprinkler heads.Sprinkler heads that don't pop up.Water that sprays wildly or not at all.Sprinklers with heads that are completely broken off.
How do I know if my sprinkler head is leaking?
1:063:21Finding leaks in your in-ground sprinkler system - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first thing to do is look and listen do you hear water running. Do you see water bubbling upMoreThe first thing to do is look and listen do you hear water running. Do you see water bubbling up from the ground are there any wet spots or pooling of water.
How do you replace a sprinkler head nozzle?
0:080:49Spray Sprinkler - How to Replace a Spray Nozzle - YouTubeYouTubeStart of suggested clipEnd of suggested clipUntil it can be grasped remove the old nozzle by unscrewing it from the tip of the stem. Screw a newMoreUntil it can be grasped remove the old nozzle by unscrewing it from the tip of the stem. Screw a new nozzle onto the end of the stem. To avoid stripping the threads.
Can you remove a sprinkler head?
0:093:03How To Replace A Sprinkler Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe other method you can use is actually cutting around the head removing. The sod. Taking out theMoreThe other method you can use is actually cutting around the head removing. The sod. Taking out the dirt from around the head and then doing your replacement.
How do you replace a pop up sprinkler head?
0:194:28Simple Repair/Replacement for Pop-up Sprinkler Head - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I'm going to do is a excavate the dirt. Around the unit here unscrew it get a replacement and popMoreSo I'm going to do is a excavate the dirt. Around the unit here unscrew it get a replacement and pop it back in so we can do is carefully excavate.
How do you replace a residential fire sprinkler head?
How to Replace Fire Sprinkler HeadsLocate the fire sprinkler water valve. ... Unscrew the cage or cap covering the sprinkler head, if applicable. ... Apply anaerobic pipe thread sealant to the threads of the new nipple and attach the sprinkler head, being careful not to over tighten it.More items...•
How much does it cost to fix a sprinkler system?
The average cost to repair your sprinkler system is $75–$250, with the average homeowner paying $212, which includes an hourly labor cost of about $75 by a professional plumber. Most sprinkler repairs involve replacing sprinkler heads at $5 to $20 per head, or replacing valves at $20 to $40 per valve, not including the cost of labor.
How much does it cost to replace a sprinkler valve?
The cost to replace a sprinkler valve is around $65–$290 which includes labor. This could be caused by debris in the valve or a broken valve, so the valve will need to be located, possibly excavated, and cleaned out or replaced. Sometimes, valves can be rebuilt instead of replaced.
Why do sprinklers need to be fixed?
The main reasons your sprinkler system will need to be fixed can include a damaged backflow preventer, faulty valves, broken sprayer heads, a malfunctioning sprinkler system controller, and/or broken or leaking pipes.
How much does it cost to install a sprinkler system controller?
Installing a new sprinkler system controller and timer will cost $150 to $225 on average, plus labor. However, your technician may only need to reprogram or rewire your unit, at an average cost of $80. If wiring is an issue you can expect to pay $1 per sq. ft. including labor, and sometimes you may need to hire an electrician at $50 to $80 per hour.
How much does it cost to replace a water system?
Some homeowners can save up to 40% or their original water usage with the replacement. The replacement cost will be approx. $0.04 per square foot of ground watered plus the cost to remove the old system of $40–$85/hour.
How much does it cost to replace a head?
Most service calls are to replace broken heads and risers, but you might need a head lowered or raised, or you need a new head added to an existing system. Adding a head will cost twice as much as replacing or relocating one, costing $70–$210 compared to the replacement cost of $25–$60.
When do sprinklers go out?
Typically a sprinkler system will start to go out around at 20 years old. Consistently be on the lookout for water bubbling around heads, zones that won't turn on, or dry spots in your yard. If you see any of these problems or broken parts, call a pro to evaluate.
How much does it cost to replace a sprinkler head?
The cost to install additional sprinkler heads is between $94 and $103 or about twice as much as replacing or relocating one. Replacing or relocating sprinkler heads for your entire lawn will cost about $400.
How much does it cost to fix a head?
Professional repair of your heads can run from $65–$90. [1] If you replace them yourself, you can buy them at a home improvement store for $2–$12 each, depending on what kind you buy. Replace all the heads in the system for about $400.
How long do sprinkler heads last?
A high-quality system that has been properly installed and is well-maintained should last up to 20 years. Sprinkler heads will only last as long as they are protected. Most break because of lawnmowers, dog’s teeth, or playing children.
Why do you need an inground sprinkler system?
A beautiful green lawn epitomizes the American Dream, which is why you installed that inground sprinkler system in the first place—it’s the easiest way to keep your grass green and healthy, increases the resale value of your home, and boosts your curb appeal.
How does a rotary head work?
Instead of a spray pattern, rotary heads shoot out water in a single stream as the head rotates so water doesn’t pool in one place. This system delivers water slower than other heads.
What is a bubbler head?
Also called a bubbler, this head is best used in small areas. It provides a steady flow of water which soaks the ground. These heads work well in the garden and in shrub areas.
How much does it cost to have 8 zones blown out?
It will cost from $50–$150 to have 8 zones blown out before winter, which is necessary because any water left in the pipes will freeze and possibly crack those pipes. [3] [4] If one has already cracked, repair costs could be as much as $400 or more, depending on the damage.
How much does it cost to repair a sprinkler system?
(Photo courtesy of Hunter Industries) Repairing a lawn sprinkler system costs an average of $250. Most jobs range between $130 and $380.
How much does it cost to replace a valve?
Some heads can cost as much as $30 each, and brass valves range to $100 or more. Valve replacement averages about $12.50 to $40 per valve in addition to labor. The valve controls the release of water to the various zones in the yard.
How much does it cost to repair a burst water pipe?
In colder temperatures, an improperly winterized system can cause a pipe to freeze or break. The cost to repair a burst pipe ranges from $150 to $350, not including the expense to fix water damage.
Can a plumber fix a timer?
In most cases, your plumber should be able to repair or replace this for you. Sometimes, you may need an electrician. But before making the call, confirm that the timer program is set correctly for each zone. If you feel comfortable doing so, turn off power to the circuit and check the wiring on the controller.
How much does it cost to replace a sprinkler system?
The cost to repair a sprinkler system ranges from $131 and $390, averaging $256. Replacing sprinkler heads runs $2.50 to $18 per head for most types, plus a range of $50 to $100 per hour for labor by a professional plumber. Valve replacement averages about $12.50 to $40 per valve in addition to labor. Some heads can cost as much as $30 each, and brass valves range to $100 or more.
How much does it cost to fix an irrigation system?
With a range of $125 to $375, the cost of irrigation repair often depends on the part. Repair for a broken piece usually requires replacement, especially for less-expensive components. Plumbers typically mark up the price they pay for the parts by 25-50%, in addition to the average $50 to $100 per hour for labor.
What is a sprinkler system?
Sprinkler systems are a great way to maintain your lawn. They take the hassle out of managing it yourself and ensure that the lawn gets evenly watered at the right time of day. If you start having problems with your system, it can be tough to figure out what to do.
How much does it cost to install a backflow preventer?
Installing a new backflow preventer costs $125 to $900 for the part, plus $25 to $250 for professional installation. This tool keeps water from flowing back toward the supply source. Annual testing ranges from $50 to $100 and can help ensure that the preventer continues to perform.
How do I clean a lawn mower head?
These parts need regular cleaning, or they may get blocked. If it's a pop-up head, you can take these steps to troubleshoot: 1 Check to see if any dirt or grass is keeping it from popping up and activating. 2 Clear the lawn around it and see if that resolves the issue. 3 If not, try cleaning the head if you feel comfortable doing so. 4 Contact a pro for assistance if it still doesn't work.
How much does it cost to hire an electrician?
Sometimes, you may need an electrician. The expense to hire an electrician runs $50 to $100 per hour. Before making the call, confirm that the timer program is set correctly for each zone. If you feel comfortable doing so, turn off power to the circuit and check the wiring on the controller.
