Repairing Guides

how much does it cost to repair a water line

by Prof. Else Schaefer I Published 3 years ago Updated 2 years ago
image

Main Water Line Repair Cost
Repairing your home's main water service line costs $934 on average. You'll typically spend between $337 and $1,533. You'll typically pay $70 to $120 per hour plus materials for most water line repairs.

Full Answer

How much does it cost to repair a water line?

You’ll typically spend between $333 and $1,483. You’ll typically pay $70 to $120 per hour plus materials for most water line repairs. Materials include new sections of pipe, valves and bushings. This guide covers repairs to your home’s main water service line.

How much to replace water main line?

Water Main Repair Cost by Type of Repair

  • Main Water Shut-Off Valve Repair. Repairing a broken or leaky shut-off valve for your main water line costs between $150 and $300. ...
  • Main Water Line Leak Repair Cost. Repairing a leaking water main ranges from $300 to $3,000. ...
  • Water Main Break Repair Cost. Repairing a broken section of your water main line averages $400 to $2,000. ...
  • Cost to Solder a Pipe. ...

How much does it cost to repair a water pipe?

The water damage can only get worse, which adds to the bottom line of fixing this leak. Pipe bursting repair costs $100 to $200 per foot with most spending between $400 and $1,500 total. Water damage clean up and repair may add $1,000 to $2,000 in costs depending on the extent.

How much does it cost to replace water main?

If your break is past the point of repair, replacing your water main line will need to happen. The average cost to replace your water main line is approximately $2,500, depending on the location of your water main and the length of pipe being replaced.

image

How much does it cost to fix a hole in a water pipe?

Plumbers can fix a leaking pipe for $250 on average with homeowners spending between $150 to $850 which includes having to detect the location of the leak. Pipe leak repair cost varies depending on the location of the pipe. If it's hard to access, it will cost more. A leaking pipe needs fixing as quickly as possible.

How do you fix a leaking main water line?

2:448:32Repair a leak in the Mains Water Line to your house - YouTubeYouTubeStart of suggested clipEnd of suggested clipYour new concrete patch to your old if you want to see how to do it properly there's a video card upMoreYour new concrete patch to your old if you want to see how to do it properly there's a video card up on the top of your screen there click on that have a look at how to do a concrete patch properly.

How long does it take to fix a broken main water line?

between four and eight hoursOn average, the main water line repair will take between four and eight hours.

Can you replace a water line yourself?

If you have low water pressure in your home and still have old galvanized steel pipes, chances are that they're corroded and clogged with rust and other minerals. Professional replacement is expensive, costing thousands of dollars. But often you can do the job yourself, or at least solve the worst of the problem.

Who is responsible for a leaking water pipe?

In most cases, it's your responsibility to maintain the supply pipe. This is the section of the service pipe from the boundary of your property – usually where the water meter and stop valve are – into the property itself.

How do you know if your main water line is leaking?

Main Water Line Leak SymptomsSymptom 1: Puddles of Water. ... Symptom 2: Hissing, Whistling, or Bubbling Sounds. ... Symptom 3: Low Water Pressure. ... Symptom 4: Water Damage on the Ceiling and Walls. ... Symptom 5: Mold & Mildew Presence. ... Symptom 6: Discolored Water. ... Symptom 7: Unexplained Spike in Water Bill.

How do I fix a broken water pipe under my house?

2:415:07How to Repair a Burst Water Pipe - YouTubeYouTubeStart of suggested clipEnd of suggested clip1 you can use a clamp and sleeve repair kit to temporarily fix a leaking copper pipe. This kit isMore1 you can use a clamp and sleeve repair kit to temporarily fix a leaking copper pipe. This kit is easily available in most local hardware stores.

What causes a water main to burst?

Main breaks happen due to various reasons and are a normal part of operating a water utility. Temperature changes or overly dry or wet weather can cause the ground to shift. This results in breaks to the water main pipes. The age of the main or sudden fluctuations in the pressure may also cause a break.

Can you shower after water main break?

Limit Water Use – Try to limit water use during a water main break. Avoid drinking tap water, taking a shower or bath, doing laundry, or running the dishwasher. Dirt, debris, and bacteria can contaminate water after a water main break.

How deep is the main water line?

The general depth of underground water pipes is 12 inches below the frost line in your specific geographical area.

How do you change a water line?

1:032:04How to Replace Copper Water Lines With PVC Pipe - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what you'll do is take your Quick Connect. Slide it over your copper. And firmly into place giveMoreSo what you'll do is take your Quick Connect. Slide it over your copper. And firmly into place give it a quick pull out make sure it's not going to slip off. Then you take your PVC.

What is a water line called?

PVC Pipes PVC is a plumbing pipe known for its versatility, lightweight, and blockage resistance. PVC piping is generally used as part of a sink, toilet, or shower drain line, though it's sometimes used as a home's main water supply pipe.

Compare Water Main Repair Price Quotes

Water mains often last 50 years or more, but eventually they’re going to fail - creating a hassle at best and extensive flood damage at worst. When...

Cost to Fix A Burst Water Main Line

The cost to fix a water main break depends on the severity of the break. Not surprisingly, repairing a small section is far less expensive than rep...

Choosing A Water Main Repair Company

When a water main breaks, you can’t afford to spend days looking for the right repair service. But there are some steps you can take to make sure y...

A Word on Water Lines

Your exterior water service line is the sort of thing you likely don’t even realize exists until something goes wrong. An exterior water service line carries water from the public main into your home. The path water takes to get to your faucet has three major components:

Signs of Trouble

In other words: Your water line, despite being buried under the soil, is still susceptible to damage. Here are some of the things that can happen when your water service line is compromised:

What Needs to Be Done?

Unfortunately, repairing your water service line isn’t a DIY job, so you will need to call in the professionals. Work done by whomever you hire to fix the problem likely will include:

How much does it cost to fix a water line?

Repairing a broken or leaky shut-off valve for your main water line costs between $150 and $300. These valves are usually easy to access, so the repairs are low-cost and simple.

How much does it cost to replace a water tap?

Replacing the tap for your water line ranges from $200 to $400. The tap connects your water line to the main city line, and it can corrode from general wear and tear. Fortunately, it is a relatively simple and affordable part to replace, but you still need a professional.

How to tell if water line is broken?

Sometimes, a leak or break in the water has no obvious signs. Other times, it can be dramatic. Homeowners need to be prudent and watch for signs, great or small, which could indicate the water main line needs repair. There are many possible indicators of this, from changes in pressure to rusty-colored water coming out of your faucets. Here are a few of the most common signs your water main has broken: 1 A sudden increase in your water bill. 2 Wet spots or flooding in your yard. 3 The sound of water running when all the taps are turned off. 4 A vibrating sound in your pipes when the water is shut off. 5 A drop in water pressure. 6 Discolored water. 7 The growth of mold or mildew in your home’s lower levels. 8 Water in your home’s lower levels.

How much does it cost to solder a copper pipe?

Cost to Solder a Pipe. Soldering copper pipes for your water main costs between $500 and $2,000. Copper is a very strong material and popular for water lines because it can last very long, resisting wear and tear and reducing the risk of leaks and breakages.

Why is my water line rusty?

Have a professional diagnose this issue because there are several possible causes. Sediment or contamination is likely getting into your water through a crack in the pipe or that the pipes are rusty. However, the main line might not be affected. It might just be one pipe in your house.

What to do if water shut off valve is leaking?

If your main water shut-off valve is leaking, it must be repaired or replaced. For minor leaks, the existing valve may need tightening or readjustment to stop water from dripping out. In other cases, the valve might be damaged beyond repair and need replacing, which is a longer and more costly job.

What is the recommended strategy for replacing a pipe?

If the pipe has been repaired before, the damage is in more than one section, the pipes are old, or if the cost of the repair is greater than 50% of the cost of a replacement, the recommended strategy is to completely replace the pipe. This means a much higher bill than a small crack that can be soldered shut.

How to fix a water line?

Prevention is always better than cure. If you want to save yourself from spending a thousand dollars on water service line replacements, here are some of the ways you can do to detect the problem before it gets worse: 1 If there’s a sudden, unexplained increase in your water usage, it could mean that there’s a leak somewhere. 2 When you notice excessive dampness or puddles on your lawn, you better call a plumber. It’s possibly due to a large water leak underground. 3 A hissing or humming sound from the pipes when no one is using water is also a strong indicator of a broken pipe. This is most obvious at night when the house had quieted down. 4 Loss of water pressure may also be observable, although this sign is applicable only for extreme cases. 5 You may also check the flow indicator of the water meter. If the wheel of the flow indicator is moving even when no one is using the tap, it means that you have a leaky pipe in your house.

What happens if you leave water lines unchecked?

If left unchecked, it may cause water damage to your property and may also affect the water main and flood the sidewalk.

What happens if a water line is buried too deep?

If the pipe is situated in hard-to-reach areas or is buried too deep, the overall cost to repair water service line increases. Other factors such as the presence of interfering utilities, large tree roots, and even boulders could also impact the total repair cost.

What are the factors that affect the cost of water service?

Cost Factors. In general, the main factors that influence water service line repair cost are the severity of the problem and the extent of the damage. Other cost factors that impact the cost of service line repair also include:

Is it expensive to replace old pipes?

Outdated pipes are usually difficult to find and too expensive to repair. A replacement could save you hundreds of dollars in the long run instead of doing numerous repairs. Old pipes are also prone to breakage even after repairs so replacing them is oftentimes the most practical choice.

Is a water main the same as a service line?

While these two things sound the same, the water service line and the water main are actually two different things. The water service line, as defined by the International Residential Code, is the pipe that runs from the water main and brings back water to your house. On the other hand, the water main is the primary pipe ...

Can you dig a trenchless pipe?

But if you want to avoid creating a hole in your yard, you may also opt for a trenchless pipe laying technique. Regardless of whether you dig a trench or not, just remember that as the pipe goes deeper, the water line leak repair cost also goes higher.

How long does copper line last?

Copper line generally last about 50-70 years UNLESS in a corrosive soil environment or if it has groundwater flowing actively past it, then can be 20-30 years. Plastic lines from the 60's to 80's vary a lot - from as little as 10 years to 50 plus dependingon brand.

When should galvanized pipe be replaced?

Your plumber should be able to help with that determination. Very general rule of thumb - very old line from before 80's, if galvanized pipe, could be at its practical life and be ready for total replacement.

How much does it cost to repair a water line?

Repairing your home's main water service line costs $875 on average. You’ll typically spend between $331 and $1,424. You’ll typically pay $70 to $120 per hour plus materials for most water line repairs. Materials include new sections of pipe, valves and bushings.

How much does it cost to fix an underground water line?

Repairing underground water list will cost $150 to $3,000. Simple, easy to access repairs cost $150 to $700. Anything difficult to get to or that requires replacing large pipe sections might hit up to $3,000.

How much does it cost to repair a corrosion pipe?

Corroded pipe repair costs $600 to $5,000. You’ll need to have all corrosion cut out and replaced. Typically, this means replacing the entire pipe. Corrosion often happens due to aggressive soil – acidic or resistive dirt.

How much does it cost to replace a valve?

Replacing a valve costs $150 to $300 depending on its location. Most lines don’t have buried valves. You’ll usually find these right outside your house in a valve box or exposed in a crawlspace or your basement.

What is the difference between a water main and a home service line?

A water main runs under public property, usually next to or under a street. The city takes responsibility for repairs. A home's “main” water service line connects your home to the water main. You’re usually responsible for repairs up to your property ...

Cost to Repair a Drain Line

Let’s start by discussing the method known as cured-in-place pipe lining. Some plumbers may also refer to this as the CIPP method. Cured-in-place pipe lining is the most expensive relining method at $170 per foot.

Cost of Replacement Drain Lines

Cast iron is one of the more conventional material options available if you need a new drain line. It’s also one of the most expensive options at $20 per linear foot.

Cost to Replace Drain Line by Location

The basement is a part of the home often chosen to house the drain line. If that’s where your problematic drain line is, you can expect to spend $400 on replacing it.

Related Questions

The signs of a broken drain line are hard to miss. Inside your home, you may notice that fixtures like your sink or tub are taking longer to drain. You may also hear some gurgling noises as the water goes down.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9