Driveway repair cost
| Project | Cost per square foot |
| Concrete driveway lifting / mudjacking | $3 – $6 |
| Asphalt driveway repairs and patching | $2 – $5 |
| Asphalt driveway repairs (saw cut) | $4 – $12 |
| Asphalt driveway repairs (infrared) | $2 – $6 |
How much does it cost to fix an asphalt driveway?
The price can rise or fall depending on many factors including location, quality of material, depth of material required, and the size of your drive. Asphalt driveway installation pricing across the country can be anywhere from $1,500 to $10,000, but most spend $4,000 to $8,000.
What is the average cost to repair a driveway?
To confirm the integrity of a concrete driveway, hire a professional to address significant surface issues. The average cost to fix a concrete driveway ranges between $500-$1,100, with the average homeowner spending $800 to resurface a 250 square foot area, including labor and materials.
When to seal, replace or resurface an asphalt driveway?
There are a number of reasons why a drive should be replaced but the most common are:
- Age. The typical service life for an asphalt drive is 20 to 30 years. ...
- Failing Subbase. Your drive sits on top of a subbase consisting of 6 to 9 inches of gravel. ...
- Substandard Materials or Construction. Contractors looking to take shortcuts, take them in the preparation of the subbase. ...
How much does it cost to Blacktop a driveway?
‘ Paving a new driveway costs an average of $4,482, but typically falls in the range of $2,403 to $6,563,’ says Bailey Carson, home care expert at Angi.
How do you fix crumbling asphalt driveway?
Use asphalt paste patch that contains fine aggregate to fill small holes and gaps along curbing. Mound the repair above the surface the way crews do on roads. They let car tires reduce the speed bumps and gradually compact the mix. You can use a heavy metal tamper, or the end of a 2-by-4 to pound the patch nearly flat.
Should I resurface or replace my asphalt driveway?
Resurfacing is best for driveways that are aging or have more than 25% of the surface covered in light to moderate damage. If you resurface the entire driveway, it will look brand new. Replacing the driveway is necessary if your driveway has large potholes or several cracks wider than 1/4-inch.
Can you put new asphalt over old asphalt?
An overlay or resurface can be used on an asphalt driveway, parking lot, or road way. It consists of installing a new layer of asphalt over the existing asphalt and grinding at the transitions (i.e. sidewalks, garages, drains, curbs, or other asphalt points).
Do it yourself fix asphalt driveway?
InstructionsClean Out the Cracks. Cracks in asphalt driveways can easily lead to weeds taking advantage of the space. ... Apply Weed Killer. ... Fill in Small Cracks. ... Fill In Deep Cracks. ... Apply Patching Compound. ... Let the Asphalt Repair Cure. ... Apply Sealant to the Repaired Area.
Can you replace sections of a driveway?
Can you replace part of a driveway? Yes, you can remove a portion of a driveway that's severely damaged and then have a new concrete slab poured in its place. If you need to do this, SUNDEK can unify the look of the driveway so you can't tell where the old surface ends and the new one begins.
How often should an asphalt driveway be resurfaced?
The short answer is that you should reseal your driveway every 3-5 years. After that many years, your driveway starts to show significant cracks that will fill with water and destroy the driveway over time. Resealing the driveway adds a thin layer of asphalt onto the topmost layer, sealing any cracks beneath it.
Is 1.5 inches of asphalt enough for a driveway?
Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate.
Can you pave over a cracked driveway?
If you've been thinking about updating your driveway or parking lot, you might be wondering if asphalt can be paved right over the top of the concrete. Well, the answer is yes!
Can you fill asphalt cracks?
Most crack filler formulas can patch hairline cracks to larger cracks up to 1/2 inch wide, depending on the formula and application process used. If you're trying to fill several fine surface cracks, it's best to apply a sealer over the entire affected surface of your driveway.
How do you fix a large hole in asphalt driveway?
3:385:30How to Repair an Asphalt Pothole | Ask This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow what we're going to use for our top coat is this cold packs asphalt repair if you take a look atMoreNow what we're going to use for our top coat is this cold packs asphalt repair if you take a look at it it's a stone mixed with asphalt binder. We just pour it in the hole in inch and a half thick.
How do you repair large cracks in asphalt driveway?
1:162:22How To Fill Asphalt Gaps and Cracks - Ace Hardware - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing a caulk tube of crack filler. This is a good idea if you just have maybe one or two cracksMoreUsing a caulk tube of crack filler. This is a good idea if you just have maybe one or two cracks that are probably less than an eighth of an inch wide. And an eighth of an inch deep.
How do I fix a large crack in my driveway?
0:002:59Concrete Driveway Crack Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf your crack is more than a half an inch deep you want to use a filler rope in this and this isMoreIf your crack is more than a half an inch deep you want to use a filler rope in this and this is just a foam caulking.
How much does it cost to patch asphalt?
Asphalt patching cost. Asphalt patching costs $50 to $300 on average, depending on the size and repair method. The cheapest way to repair an asphalt driveway is with cold-mix asphalt, which costs $2 to $4 per square foot. Hot-mix asphalt repairs are more permanent and always require professional installation.
What is the best way to repair an asphalt driveway?
Depending on the driveway’s age and the level of damages, asphalt driveway repairs include either patching, resurfacing, or repaving. A paving contractor should inspect the asphalt pavement and foundation conditions to provide the best solution.
What to do if your asphalt is not level?
If the asphalt surface is no longer level and has extensive cracks or holes, hire a paving professional. Hire a contractor or smaller company for minor asphalt repairs. Larger asphalt companies typically do resurfacing or repaving jobs only.
How much does it cost to repair a sinking driveway?
Repairing a sinking asphalt driveway costs $2 to $5 per square foot to fill and level small surface areas. Replacing sunken sections costs $4 to $10 per square foot for driveways with foundation issues. Hire an asphalt repair specialist to diagnose the problem.
How much does it cost to fix a pothole?
Pothole patching costs $25 to $40 per pothole plus $100 to $250 for bringing out the machinery and crew.
How much does it cost to replace a garage apron?
Asphalt garage apron repair costs $2 to $5 per square foot to fill and level the sunken pavement. Replacing a 2-car (10’x20’) garage or driveway apron costs $800 to $2,000 on average or $4 to $10 per square foot and is a more permanent solution.
Asphalt Repair Cost per Square Foot
Homeowners pay between $2 and $5 per sq.ft. for asphalt 1 driveway repairs. Costs can be higher, depending on the repair method and the damage’s extent. Different repair companies and workers may also have various methods of calculating costs.
Cost to Repair an Asphalt Driveway by Type of Repair
A range of problems can arise with an asphalt driveway, from cracks and potholes to sunken sections and crumbling areas. The repair costs are strongly influenced by the type of problem because some issues are much cheaper and easier to fix than others. The table below shows common asphalt driveway problems and the average repair costs.
Asphalt Driveway Repair Cost by Solution
Repair workers use various repair methods to fix your driveway’s issue, depending on the problem. If there is a crack, they usually fill it in. However, it might need a different treatment like resurfacing if the driveway is crumbling. Different repair methods have differing costs.
Labor Costs to Repair an Asphalt Driveway
Driveway repair professionals can have fixed fees for different repair jobs or charge by the hour, averaging between $50 and $150 per hour. Some have a minimal charge or call-out fee, ranging from $50 to $100. Rates vary by state, and you might also have to pay extra to cover travel costs if the repairman has to travel a long distance.
Asphalt Driveway Maintenance
A good way to reduce the risks of asphalt damage and repairs is to ensure your asphalt driveway is well-maintained.
Repair vs Replace an Asphalt Driveway
You may be faced with the decision of repairing or replacing your asphalt driveway. Often, the best course of action is to repair the driveway. This is cheaper, simpler, and faster in most cases.
Enhancement and Improvement Costs
Pressure washing an asphalt driveway averages $135 to $180. Pressure washing is a great way to clean dirt, debris, and stains from the driveway. Many hire professionals for this service because asphalt responds better to low pressure and must be cleaned with care for the best results.
How much does it cost to fix a crack in a concrete driveway?
The average cost to repair cracks in a concrete driveway is $0.50 to $3 per linear foot. Minimum service fees of $100 to $250 apply to patch, seal, and fix cracks. Driveway crack filler costs $5 to $10 per bottle to repair 24 linear feet of cracks less than a 1/4" wide yourself.
How much does it cost to repair a cobblestone driveway?
Repairing a cobblestone driveway costs $8 to $20 per square foot to replace individual stones and $3 to $5 per square foot for sand to fill and level sunken areas. Settling is the most common problem with cobblestone. Pros charge $6 to $12 per square foot to relevel large areas.
How much does it cost to patch a pothole?
Filling or repairing potholes costs $100 to $400 on average, depending on the size, depth, extent of the damage, and repair method. Patching costs $25 to $40 per pothole plus $100 to $250 to bring the equipment and crew to the job site.
How much does it cost to replace brick pavers?
Brick pavers cost $0.50 to $1.80 per brick or $2 to $8 per square foot. One benefit of brick paver driveways is that damaged bricks can be replaced individually. Level sunken areas by removing the pavers, filling the space with sand, and compacting the sand until it's flat.
How much does it cost to level a driveway?
Driveway leveling costs $600 to $1,200 to lift a small sinking section or $1,400 to $2,700 to level an entire driveway. Filling and leveling small surface areas costs $2 to $5 per square foot. Sinking, settling, and buckling are caused by water damage, tree roots, and foundation problems.
How old should a driveway be to replace it?
Age – Homeowners should consider replacing asphalt driveways older than 15 to 20 years and concrete driveways older than 25 years. After so many years, the foundation begins to deteriorate, and problems are more likely to recur even after repairs.
How much does it cost to resurface a driveway?
Resurfacing involves adding a layer of asphalt to your driveway and typically costs between $4 and $10 per square foot. While it won’t repair underlying issues, it will extend the lifespan on your driveway. To further extend the life of your driveway, ask your pro about having it sealed.
How much does it cost to install asphalt?
If you’re looking to install an all-new asphalt driveway, it will usually cost between $10 and $18 per square foot. That being said, these costs can fluctuate depending on the amount of prep work the area needs, permits, access to the property and the exact type of asphalt you’re installing.
Is asphalt cheap?
While asphalt is known to be relatively inexpensive, you’ll need more specific numbers to properly budget for your project. Here’s what it will cost to repair, replace or install an asphalt driveway.
Is asphalt driveway cheap?
Asphalt is the driveway material of choice for many Canadian homeowners due to its durability and affordability. While asphalt is known to be relatively inexpensive, you’ll need more specific numbers to properly budget for your project.
How much does it cost to fix a blemish on asphalt?
It ranges between $100 and $250 depending on the size of the pavement being fixed. Infrared repair can help to restore your paving and eliminate its defects. The infrared lighting heats the damaged surface, helping to remove it. Then, new asphalt can be added in order to fix the blemish.
When is it necessary to replace a driveway?
Replacement is necessary when the existing surface is badly deteriorated or the underlying gravel base shows signs of failing. Removal and replacement is also necessary if the proper drainage of the driveway cannot be achieved because the area is too flat. Help us improve this article.
How much does it cost to fix a pothole?
While most homeowners pay $2,310, the the type of damage can vary project costs. Fixing potholes and cracks can be as low as $100 to $300 while major repairs requiring asphalt resurfacing can cost up to $3,000 or more. First, fixing paving can be a very labor-intensive task that can be extremely complicated if specific steps are not followed ...
Why is my driveway cracking?
Repairing. A driveway imbalance or caving can produce surface-level cracks due to lack of underlying support. This is important to consider since vehicle traffic can weigh heavily on the asphalt and worsen these issues. Simple repairs make the most sense when the damage is surface-level, or contained to a small area.
How long does asphalt last?
Finally, there will come a time when your asphalt needs complete replacement. A typical driveway, for instance, lasts about 20 to 25 years before this replacement is necessary. One sign to look out for are so-called alligator cracks, named after their resemblance to alligator skin.
How much does it cost to repair infrared light?
It ranges between $100 and $250 depending on the size of the pavement being fixed.
Can you put asphalt over a pothole?
If your base is still sound, you can possibly install a new layer of asphalt over the old to resurface the existing area. When the cracks and potholes you find indicate larger issues, or they occur in more than one spot, resurfacing may make more sense. It does not take care of all underlying issues, but still extends the lifespan of the area.
How much does recycled asphalt cost?
Recycled asphalt costs between $10 to $20 per ton, compared to $100 to $200 per ton for brand-new asphalt. Using recycled asphalt can save you $675 to $1,350 on driveway materials if it’s available in your area. Sometimes an installer can mill the old material onsite, cutting down on transporting supplies to your home.
How much does it cost to seal asphalt?
Asphalt sealing typically costs $3 to $7 per square foot. This top coat costs less because it’s a thin layer on top of an existing surface. Asphalt sealant costs about $500 and should be done at least 6 months after the top coat. It provides a layer of protection to avoid cracking and environmental damage. An asphalt driveway requires regular maintenance, and sealing is recommended every 3 to 5 years. Any cracks or fissures should be patched up and remedied immediately.
How long does an asphalt driveway last?
Most asphalt driveways last up to 20 years. If your driveway is past its prime and showing its age, it’s time for a replacement. To completely resolve asphalt driveway issues, a replacement is the way to go.
How much does asphalt cost per ton?
It costs between $100 to $200 per ton. Cold mix asphalt costs $10 to $50 per bag, but it can be used only for temporary repairs. Cold mix shouldn’t be used for a whole driveway because it doesn’t last more than one or two seasons. Advertisement.
How many square feet does a ton of concrete cover?
One ton can cover about 40 to 80 square feet, and the total amount needed depends on the thickness of the layers. A driveway 2 inches thick can run 80 square feet per ton, and a 4-inch-thick driveway can run 40 square feet per ton. An average driveway will need 7.5 to 15 tons.
How much does a heated driveway cost?
A heated driveway usually costs $12 to $25 per square foot, depending on whether it’s new or a replacement. For the average home, the cost will be between $7,200 to $15,000.
How much does it cost to excavate a driveway?
Excavating land can cost between $1,500 to $5,100, depending on the number of cubic feet that needs to be moved. Grading, or leveling the area to make your driveway smooth and well-drained, costs between $5 and $10 per square foot for professional graders, but steep driveways may cost more.
