Plumbing Labor Price List
| Repair | Average Cost |
| Cost to Fix Leaking Pipes | $150 – $850 |
| Pipe Bursting Repair Cost | $400 – $1,500 |
| Slab Leak Repair Cost | $500 – $2,000 |
| Water Heater Repair Cost | $150 – $700 |
| Average Cost | $500 |
|---|---|
| Typical Range | $200 – $1,000 |
| Low Cost | $150 |
| High Cost | $3,000 |
How much does it cost to fix a broken pipe?
The national average cost for a pipe repair project is $120 to $170, with hourly rates ranging from $60 to $65 per hour for standard pipe repair, or $95 per hour for plumbing pipe work such as replacing sewer lines. Anyone who has ever dealt with plumbing repairs knows just how much damage can be done in a short amount of time.
How much does it cost to fix a pinhole leak?
According to A.C.E. Plumbing, expect to pay $150 to repair a pinhole leak on a half-inch copper line and $240 for a 1-inch copper line—including labor and materials to cut out the faulty piece of pipe and solder in the new pipe.
How much does it cost to replace a broken sewer line?
If the broken sewer pipe that needs to be replaced is more than ten feet long, it will be more expensive than $4,000. If you need a full sewer line replacement, it may reach up to costs of $30,000! Where the repair occurs also will affect the cost.
Does homeowner's insurance cover burst pipes?
Homeowner's insurance might not cover the cost of repairing a burst pipe, but may pay for any resulting water damage, depending on the terms of the policy. Kits for do-it-yourself emergency pipe repairs can run $6-$30, depending on what and how much is included.
How long does it take to fix busted pipes?
Water mains are generally repaired and completed between four to eight hours. One factor that may delay the repair is location of the break. A water main that is buried deep inside the earth or under another utility will take much longer. How do water main breaks happen?
How much does it cost to fix a hole in a pipe?
Leaking and burst pipe repair costs:National average cost$150Low-end cost range$49-$125High-end cost range$175-$375Feb 10, 2021
How much does it cost to fix a pipe in the wall?
Burst Pipe Repair Cost by LocationLocationAverage CostWall$150 - $500Bathroom$150 - $800Front Yard$200 - $600Basement$200 - $4,5002 more rows•Apr 4, 2022
How much does it cost to fix a broken well pipe?
How Much Does it Cost to Fix A Broken Water Pipe? A broken water pipe is no joke and can cost anywhere from $150 to $2,000. The national average cost for it is $500, with an average range of $200-$1,000.
How much does it cost to fix a leaking pipe behind a wall?
Cost to repair a leaking pipe in your wall Water pipes – Leaking water pipes cost an average of $150 to $350 to repair. Finding the leak may cost an additional $100. Drywall repair costs an additional $250 to $750, depending on the hole's size and location.
What do you do if a pipe breaks in your house?
Things to Do About a Burst PipeTurn off main. Before anything else, turn off the water supply. ... Call a plumber. Next, call a plumber. ... Clean the water. Clear away any water quickly to avoid excess water damage. ... Drain faucets. ... Let in warm air. ... Keep doors open. ... Repair sleeve. ... Rubber, wood piece, and clamp.
How much should a plumber cost?
According to HomeAdvisor, the “cost of a plumber ranges from $175 to $450 for a typical job with the average cost per hour ranging from $45 to $200. This can include jobs like repairing faucets, toilets, sinks or bathtubs. Depending on the job, some plumbers charge a flat rate, or service fee of $300 on average.”
Why do plumbers charge so much?
Plumbers are highly trained and experienced professionals who make house calls for emergencies. Plumbers must purchase and maintain liability insurance, pay any subcontractors, keep up on licensing fees, and payout many other overhead costs.
What do most plumbers charge per hour?
between $45 and $200The Cost of Hiring a Plumber Typically, plumbers are subject to an hourly rate, which is often between $45 and $200. Common repairs attract an average rate of $120. Some plumbers prefer a flat rate estimate as the variables involved in plumbing repair make it hard to have an hourly rate.
What causes a pipe to burst?
Like ice buildup, clogs can block pipes and cause pressure to build. If this pressure becomes too great, the pipe is likely to burst. Clogging can be caused by hair, soap scum, bathroom products, food or other materials ending up in a drain or toilet.
How do you fix plumbing pipes?
1:483:42How To Repair Leaky Pipes - Ace Hardware - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe pipe and tighten the clamp a compression coupling seals up against the edge of the pipe as youMoreThe pipe and tighten the clamp a compression coupling seals up against the edge of the pipe as you tighten it use a hacksaw or a pipe cutter to cut out the damaged.
How much does it cost to fix a leaking pipe in the ceiling?
Ceiling Leak Repair Cost The average cost to repair a leaking pipe in a ceiling is $500 to $2,500, depending on the extent of damage and materials involved. Roof leak repair costs $400 to $1,500 on average to replace shingles, seal the water-damaged area, and replace damaged wood supports.
How much does it cost to fix a leaking pipe under sink?
The national average cost to repair a plumbing leak is around $300. A small leak caused by a clogged drain or damage to your PVC piping in your sink waste line or shower waste line will often be around $150, on average. These repairs generally include drain cleaning and may require the replacement of minor materials.
How do you fix a broken pipe?
0:182:21How to Repair Cracked or Leaking Pipes Without Cutting or ThreadingYouTubeStart of suggested clipEnd of suggested clipApply the putty into the repair area pushing it into any cracks and tapering it on to theMoreApply the putty into the repair area pushing it into any cracks and tapering it on to the surrounding surfaces. Body should be held in place until it hardens and adheres usually around 2 minutes.
How do I fix a leaky wall pipe?
How to Fix a Broken Pipe Inside a WallCut out sections of the damaged drywall with a saw. ... Wrap a sheet around the pipe and move around until it gets wet. ... Place a container under the broken pipe. ... Cut the pipe below the leak. ... Dry the pipe. ... Cut above the leak with a pipe cutter again.Clean the pipe.More items...•
How much does it cost to fix a leaking pipe in the ceiling?
Ceiling Leak Repair Cost The average cost to repair a leaking pipe in a ceiling is $500 to $2,500, depending on the extent of damage and materials involved. Roof leak repair costs $400 to $1,500 on average to replace shingles, seal the water-damaged area, and replace damaged wood supports.
Leaking and burst pipe repair costs:
National average cost $150 Low-end cost range $49-$125 High-end cost range $175-$375 Any homeowner who's dealt with plumbing problems knows just ho...
Plumber hourly rates
To repair your pipes — due to a burst, leaking or other damage — plumbers charge an average of $85 an hour, but costs range fro, $50 to $140 per ho...
What impacts the repair costs for damaged pipes?
Repair costs for your pipes depend on the type of damage, how accessible they are, location (i.e. drain line vs. under-sink pipe), material, and th...
Does homeowners insurance cover pipe repairs?
Before you hire a contractor, check with your homeowners insurance to see if it will cover the cost of a burst or broken pipe and water damage. In...
How can you find a plumber to repair your home's pipes?
Before you hire a plumber for this common plumbing job, be sure to: Ask for a free estimate . With so many variables involved in a plumbing proje...
Average Costs of Typical Pipe Bursts
One of the main costs to consider when dealing with a broken pipe is water damage. Due to flooding and leaks in your walls, ceiling, floor, or basement, you can expect to pay anywhere from $5,000-$50,000. The average insurance claim for a broken pipe and water damage is about $15,000 and up if you have a broken water pipe in wall or floors.
Estimated Price of Additional Costs
If the reason your pipe burst is due to frozen water, the area may need to be thawed in order to properly locate and repair the pipe. The process for doing this can cost you anywhere from $20-$500.
How much does it cost to fix a burst pipe?
A Denver plumber [ 4] estimates fixing hundreds of burst pipes in one winter, with an average bill of $900.
What to do if a pipe bursts but doesn't thaw?
If a pipe is frozen but hasn't burst, it might be possible to thaw it with an electric blow dryer, a portable space heater or a heating pad, depending on where the burst pipe is located. Or, use electric heating cables (also called electric heating tape) which can be wrapped around the frozen pipe and plugged in when needed.
Where is the most risky place for frozen pipes?
The most risky areas for frozen or burst pipes are in an outside wall, under a sink on an outside wall or in an unheated crawl space. Leave the faucet open while thawing a pipe, and never attempt to thaw it with a torch or other open flame.
Why do pipes freeze in cold weather?
In cold weather, pipes that aren't properly enclosed inside the home's insulation barrier can freeze solid and then burst open. This is particularly a problem when regions that don't normally have a cold climate suddenly get hit with unusually low temperatures. If pipes aren't properly protected they tend to freeze whenever outside temperatures ...
How much does it cost to fix a leaky pipe?
Plumbers can fix a leaking pipe for $250 on average with homeowners spending between $150 to $850 which includes having to detect the location of the leak. Pipe leak repair cost varies depending on the location of the pipe. If it’s hard to access, it will cost more.
How much does it cost to install rough in plumbing?
The cost to install rough-in plumbing pipes for new construction costs $4.50 per square foot on average. Rough-in plumbing costs for a 2,000 square foot home is about $9,000, and once you add in the fixture hookup costs expect to spend $12,000 to $15,000 total. Rough-in plumbing is all the pipework that is laid under the house and in the walls and ceiling. No fixtures have been attached; this is just the pipe foundation.
How much does it cost to install plumbing in a 2,000 square foot house?
The total cost to install rough-in plumbing and fixtures in a 2,000 square foot home with 3 baths is about $12,000 to $20,000. Replumbing and replacing plumbing pipes cost $2,500 to $5,500 on average. The following installation prices are based on a new construction house of 2,000 square feet.
How much does a plumber charge per hour?
Plumbing Estimates. Plumbers typically charge $45 to $150 per hour with a minimum service call-out fee of $50 to $100. Small plumbing repairs like unclogging a toilet or fixing a leaky faucet typically cost $125 to $350. Larger jobs such as repairing the plumbing on a pipe leak, you’ll pay about $500 to $800.
How much does it cost to hire a plumber?
Hiring a plumber costs between $125 to $350 for small repairs like unclogging a toilet or fixing a leaky faucet, while bigger plumbing problems cost $500 to $800 to fix on average. Hourly rates average $45 to $150 to repair common issues such as faucets that drip, low water pressure, a toilet that runs or is broke, clogged drains, ...
How much does a plumbing inspection cost?
A plumbing inspection costs from $85 to $300, with most spending about $200. If you’re purchasing a new home, plumbing inspections are a good idea. Roots can invade pipes or have other blockages you’ll need to know about before buying.
Why do septic systems need to be fixed?
They need to fixed immediately to prevent from contaminating the groundwater with bacteria from the septic tank or sewer line.
How much does copper pipe cost?
The average price of copper pipe ranges from $2.50 to $10 per foot. In contrast, PEX pipe ranges from $0.25 to $1.50 per foot.
What happens if a water pipe bursts outside?
If the damage is outdoors, you'll need to prove that the water damage came from the pipe and not elsewhere. Unfortunately, if the pipe burst because of neglect on the homeowners part, like frozen pipes caused by you forgetting to leave the heat on while on a winter getaway, you may be responsible for the plumbing costs.
How much does trenchless sewer line repair cost?
For example, a trenchless sewer line repair has an average cost of $80-250 per foot of pipe. It will also cause less damage to your yard — and spare you any additional landscaping costs on top of your plumbing expenses.
What type of damage does a water main have?
Type of damage. The type of damage your pipes could experience is as varied as the cost to repair them. If you need to replace a water main, that will be far more expensive than a small pinhole repair. Your plumbing problem could be a pipe that is leaking, frozen, burst, noisy, broken, or corroded. You might also be experiencing clogged ...
What can a plumber do for a corroded drain?
A professional plumber can help with pipe repair and water damage cleanup. Whether you need to replace a corroded drain line, or deal with a pipe bursting, a professional plumber can help. Before you hire a pipe repair specialist to help, get an estimate on your potential plumbing costs this guide.
What is a plumbing problem?
Your plumbing problem could be a pipe that is leaking, frozen, burst, noisy, broken, or corroded. You might also be experiencing clogged or slow drains, unpleasant odors, flooding (indoor and outdoor), and water damage, which could be a sign that your plumbing problem isn't the sink, but the pipes attached to it.
How much does a plumber charge per hour?
Plumber hourly rates. To repair your pipes — due to a burst, leaking or other damage — plumbers charge an average of $85 an hour, but costs range fro, $50 to $140 per hour.
Signs of a Broken Sewer Pipe
Before considering how much a broken sewer pipe repair will put a dent in your budget, you need to make sure that you have a broken pipe first. Some symptoms for a broken sewer pipe include:
3 Factors Affecting Broken Sewer Pipe Repair Cost
The associated costs of replacing a broken sewer pipe currently run between $50 - $150 per foot. If the repair is ten feet of sewer line or less, the average cost in 2020 is likely to between $1,500 to $4,000. Sewer pipe repairs are expedited, which adds to the cost, but keeps your property and family as safe as can be.
What About Broken Sewer Pipe Insurance Coverage?
If you have homeowner’s insurance, you may be wondering: Does my insurance cover a broken sewer pipe?
What to Do About a Broken Sewer Pipe?
If you need a broken sewer pipe, it’s important to address it as soon as possible to prevent any more damage and minimize health risks. Professional help is needed to repair or replace your drains and a plumber can determine the location of your broken line through closed-circuit TV (CCTV) .
What Impacts the Cost of Drain Repair?
The cost of drain repair varies heavily depending on the construction material. The most inexpensive materials are PVC and polypropylene, costing as little as $1 per linear foot. Copper is in the middle, while the most expensive pipe material is cast iron.
Tips to Avoid Paying for Drain Pipe Replacement
If you want to avoid costly repairs of drain pipe replacement, here are some quick tips you can follow:
Final Thoughts
Fixing a broken drain pipe could feasibly be about $200 in the best-case scenarios. However, good maintenance and regular checkups will ensure that you don’t have to pay for the most expensive problems.
