How much does it cost to repair fascia and soffit?
Soffit and fascia repair jobs cost between $600 and $6,000. Soffit and Fascia Repair Cost Breakdown Qualified soffit and fascia pros typically give estimates free of charge, so you can figure out how much repair is necessary.
How much does it cost to install a wood soffit?
Wood is the perfect soffit material for homes with a classic look and feel, but it can cost more— $14 to $22 per section. Vinyl and aluminum soffits cost about the same as wood. The labor cost to install fascia is between $6 and $20 per linear foot.
How much is soffit replacement?
The average cost to replace fascia boards and soffits is $2,300, but prices may range from $600 on the low end to $6,000 on the high end Fascia boards and soffits are essential in protecting your home’s exterior by keeping out pests and allowing for ventilation in your attic.
How much does it cost to install soffit lights?
The national average cost for this project is between $800 and $2,000, with most people spending around $1,650 to install 6 lights with a gimbal trim in an existing ceiling. At the low end, you can install 4 lights with a baffle trim in new construction for $560.
How do you fix a soffit?
Soffit and Fascia RepairRemove Shingle Mold. Pry the narrow shingle mold from the fascia using a flat bar. ... Remove Rotted Fascia. Remove the rotted section of fascia. ... Remove Old Soffit. Pull down to remove the old soffit. ... Remove Rotted Rafter. ... Attach Cleat. ... Attach New Rafter. ... Seal Replacement Soffit. ... Attach Replacement Soffit.More items...
What causes soffit damage?
The most common causes of soffit and fascia damage are water and sun exposure. Being exposed to these elements for long periods, soffit and fascia boards may end up with wet or dry rot. Over time, these boards may crumble as well.
How often should soffits be replaced?
There is no definite timetable for replacing a soffit or fascia, but there are some signs that roof repair contractors look for when evaluating your roof's overall health.
How do you tell if soffits need replacing?
When Soffit and Fascia Replacement is NeededYou'll see rotting wood, or you'll notice there's a leak somewhere.The fascia may look like it needs painting.Paint may peel, or the surrounding areas may look discolored.You may even see pests or small animals getting into your home.
How do you replace rotten soffit?
The good news is that you won't even need to climb on top of your roof to fix your soffit!Pry off your shingle mold. ... Remove the fascia. ... Remove the soffit's rotting wood. ... Take out the rotted rafter (when applicable). ... Install the new rafter (when applicable). ... Prepare the new soffit. ... Attach the soffit. ... Attach the fascia.More items...•
How do you replace soffit panels?
0:090:50Soffit Installation: Soffit Panels - YouTubeYouTubeStart of suggested clipEnd of suggested clipCut the soffit with a power saw or tin snips. After the panels have been cut make sure that theMoreCut the soffit with a power saw or tin snips. After the panels have been cut make sure that the grooved side of the panel will accept the tab. Side start installing panels from one end of the run.
Can you put new soffit over old?
If you happen to be working on an older home, most contractors and homeowners find that they will need to install their vinyl soffit over top of old wood. This can definitely be done, but you will need to take several precautions to prevent the wood from rotting beneath this new layer.
Is soffit part of the roof?
Your soffit covers the underside of your roof, and therefore a portion of your attic space. Heat builds up inside of attics over time, both from the sun beating down on the house, and from the energy rising within. If this heat isn't given proper ventilation or air flow, it can cause your roof to become superheated.
Do I Install fascia or soffit first?
Once you have installed the soffit, you can finish the job by installing the fascia. The fascia will cover the outer edge of the soffit and protect the sub fascia.
How long does vinyl soffit last?
With its durability, easy maintenance and resistance to moisture, vinyl siding will last you well over 100 years.
How often should soffits be painted?
Wood soffits and fascia boards should be painted every three to five years to protect the wood from the elements. Unless they are made of aluminum, the wood will eventually rot and deteriorate if neglected. Paint fades and breaks down over time, exposing bare wood to moisture, insects, and the sun.
How much does it cost to put fascia in a house?
Fascia installation costs range from $6 to $20 per linear foot, while soffit installation tends to be cheaper than fascia at $1 to $3 per linear foot.
What is damaged soffit?
Soffit is the protective covering under the eaves of the house. Soffits protect the rafters from the elements. When the soffits are damaged, your rafters can be exposed to moisture and lead to mold and rotting. Replacing the rafters can be expensive and a hassle.
Why are my soffits leaking?
Gutter Problems A gutter that is clogged with organic debris such as leaves, or that is damaged so that water does not flow down the gutters as intended, can lead to water leaking through the house's soffit.
What's the purpose of soffits?
Like many parts of a home's exterior, soffit serves both an aesthetic and a functional purpose. Functionally, the basic mission of soffit is to protect rafters from the elements. Keeping moisture away from the rafters reduces the chance of mold, and helps preserve the life of the materials.
Should soffits be caulked?
Wooden window frames usually need more caulk, both where the glass and wood meet, and around the trim, siding and sill. Fascia Boards and Soffits – applying caulk behind fascia and soffit boards is a surefire way to increase their longevity, leading to less maintenance and expense.
How Much Does Soffit Repair Cost?
Depending on the type of material you use for the repair and the extent of the damage, soffit repair can cost a few hundred or a few thousand dollars.
What Impacts the Cost of Soffit Repairs?
There are a variety of factors that will impact how much you pay for soffit repairs.
Are You Ready to Repair Your Soffit?
Having soffit that's in the best condition is important for the safety of your home.
How much does it cost to repair a 12 foot section of soffit?
This is normally only done for the damaged sections of soffit. If only a 12-foot section of vinyl soffit is damaged, it would cost between $70 to $150 for the job. Keep in mind that some companies will have minimums for equipment and labor.
How much does a soffit cost?
Soffit Prices. Soffits are usually sold in 12 foot sections with varying widths for an average between $10 to $23 per section or about $16, on average. This translates to about $1-$3 per linear foot. Like fascia, these come in a variety of material but they tend to be priced similarly.
Why are fascia and soffit important?
Why Fascia & Soffit are Important. Soffits and fascia are trim, flashing, or covers, for the eaves section of your roof. They protect the roof and walls from moisture and animals. Gutters, fascia, and drip edges work together to deflect water from your roof to the ground without damaging the roof or walls of your home.
How much does it cost to install fascia?
The labor cost to install fascia runs from $6 to $20 per linear foot but can vary greatly between companies and locations. A typical one-story home with 300 linear feet of soffits will require about 11 to 13 hours of labor running between $800 to $1,400 with an additional $120 to $150 in supply and equipment costs.
How much does a fascia board cost?
Fascia Board Prices. Fascia boards are typically sold by the linear foot for a cost between $1 and $20 per foot, depending on the type of material. Fiber cement is sold by the square foot, between $1 and $5. Wood is the most common choice at $1 to $3 per foot because it's easy to install, cost-effective and aesthetically pleasing.
Is wood cheap to install?
Material Types: Wood is cheap to install but requires more upkeep. However, it has a significant advantage when repairs are needed. You’ll only need to repair the damaged area rather than replacing large sections such as with vinyl or aluminum.
Where is the soffit located?
They are projected beyond your house’s sides or at your roof’s overhang. In particular, the soffit is located underneath your roof and the fascia is the area directly above it. And they do more than just give your home ...
Why is soffit important?
A soffit is important as it helps in venting, keeping a steady flow of air from your roof to your attic. This prevents moisture from building up and mold from forming. This also allows the release of heat from your attic during the hot summer months. In addition, a soffit keeps out pests and animals out of your home.
How much does a circular saw cost?
There are also circular saws and jigsaws which can cost anywhere from $40 and above , and their blades that are priced at $8 to $15. Now, the price may be adding up but rest assured that it will still cost lesser than hiring a professional to do the job.
How much does a 12 hour job cost in California?
To give you an idea, a 12-hour job with a 106-linear feet workload in California has a rough estimate cost of $440 to $1,070. And even at the same time and load, it is significantly higher than in South Carolina which costs around $330 to $805.
Can fascia hold up in a rain?
And it is crucial that your fascia can hold up even through a heavy downpour. So, if you’re seeing the point, soffit and fascia are vital parts that need close attention. If you’re building your home, see that you have them made carefully and select the right materials suitable for the climate you live in.
Is vinyl fascia durable?
Though wood fascia cost the least, its drawback is on maintenance. And while vinyl might have a decent price, it’s the material that is least durable. So, when you go shopping for the supplies you need, decide not only on the price and overall look. Size of your house.
Can you cut soffit and fascia by yourself?
Additional Information. In case you are planning to install soffit and fascia by yourself, it helps that you cut the boards a bit longer than your initial measurement so you can overlap the joints. It is also important that your soffit and fascia do not have signs of rotting or any kind of damage.
Is Professional Soffit Installation Costs Worth the Price?
Homeowners know cutting out labor costs and doing the project themselves can lower the total soffit cost per linear foot. So, how do you explain that the professional installation costs of soffit are worth it?
Soffit Maintenance Costs
In addition to proper installation, the choice of soffit material will affect long-term performance as well — ultimately impacting the cost of soffit replacement.
Hidden Costs for Soffit Replacement
Some homeowners may switch up their soffit for style or preventative measures. If replacing soffit and fascia because of damage, chances are there may be other areas that require immediate repairs as well.
The Most Valuable Soffit and Fascia Replacement Material
The slightly higher installation cost of aluminum soffit is worth the investment for homeowners who want a long-lasting product that requires little to no maintenance that is installed correctly.
How Much Does It Cost to Install Soffit and Fascia?
The cost to install soffit and fascia depends on the configuration of your home, when you are hiring a professional to do this job. For example, fascias made for stone, concrete or brick, would cost anywhere between $13 and $30 per linear foot for a sloped or flat roof. This price is greatly influenced by the precise height and shape of the roof.
What are the extra costs?
A reputable contractor will inspect the roof, supporting joists, and eaves to make sure they’re in good shape before installing new soffits or fascia. There is no point in installing new materials on top of poor foundations as it only causes more trouble than it is worth.
Important things to consider
There are many different materials for soffits and fascia. Some of the most popular materials are wood and aluminum, but there are synthetic or composite options as well, like vinyl and UPVC that can be easier to maintain while being durable in harsh weather conditions.
How can I save money?
In order to save money, it is recommended to search for at least three price offers and always look for insured and licensed contractors. Also, if you are not in a hurry with this job consider negotiating. Some contractors might offer discounts if they can perform this service over a longer period of time.