Hardwood Floor Repair Cost per Square Foot
| Size | Average Repair Costs Per Sq.Ft. |
| 20 sq.ft. | $100 - $500 |
| 50 sq.ft. | $250 - $1,250 |
| 100 sq.ft. | $500 - $2,500 |
| 150 sq.ft. | $750 - $3,750 |
Full Answer
How much does it cost to restore hardwood floors?
How much does it cost to restore a hardwood floor? The contractor cost to restore a wood floor is $1,485 vs. doing it yourself for $275 and saving 82 percent. A wood floor is one of the nicest features in a home because of its good looks and durable surface. If the wood develops surface scratches or loses its sheen, consider restoring the floor.
How much does it cost to repair a floor?
This leads to a wide range of costs associated with repairs. The national average for floor repair ranges from $1,000 to $5,000 with most people paying around $2,000 for hardwood repair with moderate damage. At the low end, carpet repair costs are as little as $100 for a small tear without a patch.
When to replace vs. refinish a hardwood floor?
Should You Refinish or Replace Your Hardwood Floors?
- Structural Damage. Although a home’s structural damage doesn’t always directly impact your flooring, the process of repairing the structure will!
- Movement & Gapping. Oftentimes with older homes you can find significant gapping in between floor planks. ...
- Aesthetic Changes. ...
How much does hardwood flooring installation cost?
Installing 1,000 sq. ft. of area with hardwood costs $9,400 – $42,600. That is if you use traditional wood material. The cost would be $9,400 – $31,600 for engineered hardwood. The total cost of hardwood flooring depends on a few factors. The hardwood material, installation & labor cost, finishing are the factors to look upon.
Is it cheaper to repair or replace hardwood floors?
Refinishing hardwood floors is more cost-effective than replacing them. On average, it costs about $2,000 to $7,000 to replace hardwood flooring (two to three times more than to refinish).
How much does it cost to repair a water damaged wood floor?
Hardwood Floor Water Damage Repair Cost Repairing water damaged floors costs $8 to $50 per square foot. That price repairs or replaces boards as necessary and blends them into your existing room.
How much does it cost to replace wood floor planks?
Installing hardwood flooring averages between $6 and $12 per square foot. On average, wood flooring costs between $3 and $7 per square foot for materials and $3 to $5 per square foot for labor. An estimate for installation of 1000 square feet of hardwood flooring runs between $6,000 and $12,000.
How much does it cost to repair floorboards?
A simple floorboard repair that includes refinishing the surface (which can be necessary with issues like scratches, sun fading and minor water damage) can cost between $3 and $5 per square foot, while replacing a few boards costs, on average, around $200 depending on how many boards need to be replaced.
How do you repair damaged hardwood floors?
0:394:54How to Repair Damage to Hardwood Floors - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith the stain stick. Okay. We're gonna fill that in okay. And then what I'm going to ask you to doMoreWith the stain stick. Okay. We're gonna fill that in okay. And then what I'm going to ask you to do is lightly rub the area okay.
How do you fix water damaged wood floors?
It's not just water that causes mold and mildew; it's the combination of water and dirt.Remove Surface Water. ... Scrub the Floor. ... Treat Moldy Areas. ... Dry the Floor. ... Sand Water-Damaged Wood Flooring. ... Deal With Mold on Wood Under Paint. ... Replace Laminate.
How much does it cost to install 1500 square feet of hardwood floors?
It will cost anywhere from $6,000-$15,000 to install 1,500-square-feet of wood flooring.
How much does it cost to replace 1000 sq ft of flooring?
$3,000 to $30,000To cover 1,000 square feet, you can expect to pay $3,000 to $30,000. For materials alone, you'll pay $2 to $15 per square foot.
How much does it cost to redo floors?
If you want to get new flooring installed in your home, expect to pay between $1,491 and $4,553 for flooring installation costs. The national average is around $2,985 for 500 square feet of coverage, and this average cost includes materials and labor.
How do you replace rotten floor boards?
4:387:43How to Remove and Replace a Rotten Subfloor - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut we can't just lay down plywood. We want to attach each side of the plywood to the substructureMoreBut we can't just lay down plywood. We want to attach each side of the plywood to the substructure of the house. We need to add boards in between the floor joists to screw the new subflooring.
Can you fix squeaky wood floors?
Creaky floors occur when the subfloor has been separated from floor joists. You can solve this by shimming the subfloor. Wedge shims between the joist and subfloor, and use a clawhammer to tap them into place. Don't pound the shims because they could lift the floorboards and cause more squeaking.
How much does it cost to fix uneven floors?
The price to fix uneven floors is $2,000 to $20,000, depending on how large the area is. Uneven surfaces have the same cause as sunken ones: old and sagging joists, and the floor needs to be lifted and reinforced with either sistered joists or brand new ones, depending on the issue.
How much does it cost to repair warped floorboards?
The cost to repair a warped floor is $225 to $3,000, depending on the size of the affected area. Floors warp for the same reasons that they buckle; improper installation or moisture.
How much does it cost to fix squeaky floors?
What is this? In general, reattaching the floor to the subfloor or subfloor to joists costs $4.62 per sq. ft. When the subfloor or joists have to be repaired, it can cost $500-1,000 and $6,000-10,000, respectively.
How much does it cost to fix sagging floors?
The typical costs for repairing sagging floors start at $1000 and can go up to $10,000, with the average rate being around $300 per square foot. But this can vary depending on the extent of the damage and materials needed to get the job done.
How do you repair a floor joist?
0:5614:17Floor Joist Repair Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we've got an issue we need to fix this now the repair of a floor joist like this involves youMoreSo we've got an issue we need to fix this now the repair of a floor joist like this involves you putting another joist of the same dimension. Including of course the thickness. And the length.
How much does it cost to repair hardwood floors?
Hardwood Flooring Repair Cost. Repairing hardwood floors cost anywhere from $1 to $100 per square foot or $100 to $3,000 or more total. In many cases, it's cheaper to replace your floors than to repair a small section. However, you might prefer to save historic floors.
How much does it cost to scratch a floor?
Scratches cost anywhere from $75 to $2,000 or $1 to $8 per square foot. For a single scratch, you might go with an inexpensive wood filler and stain. For extensive scratches, you'll likely need to refinish the floor completely, costing closer to $2,000.
How much does a whole house dehumidifier cost?
Dehumidify the area. You can do this with a simple dehumidifier for the room. Or, consider a whole house dehumidifier costing $1,300 to $2,800 – less than the cost of replacing your floors. Consider sanding and refinishing if your cupping problem doesn't right itself after a few days.
Can you fix a hardwood floor with a dehumidifier?
Some things, like light scratches or cupping, you may try to repair yourself. Buffing out a top layer or turning on a dehumidifier (or turning off a humidifier) could quickly and easily fix your problem . But for deep gouges, water damage and mold, always call a professional. It's likely that a DIY fix can quickly lead to a professional replacement. A local hardwood floor repair company usually inspects your damage before making suggestions and providing a quote.
Is it more expensive to repair water damage than to replace a floor?
It's more expensive to repair water damage than to replace your floor if it's widespread. However, it's less intrusive to repair and less environmentally impactful. You may need to repair joists and subfloors for extensive damage and may want to refinish the entire room.
Can you refinish a scratched floor?
Then, you'll put a new layer of stain and sealant on it. Refinishing is the repair for scratched floors. But, for water damage, cupping and uneven floors, you're likely looking at a different method to fix them.
What is required to repair hardwood floors?
Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup. Cost of related materials and supplies typically required to repair hardwood floor including: manufacturer recommended underlayment, fasteners, adhesives and surface sealants.
How to estimate labor costs for a project?
To estimate costs for your project: 1. Set Project Zip Code Enter the Zip Code for the location where labor is hired and materials purchased. 2. Specify Project Size and Options Enter the number of "repairs" required for the project. 3.
How much does it cost to repair hardwood floors?
The price to repair the flooring is dependent on the damage, size, repair needed, and labor cost. The average cost to repair hardwood floors ranges from $1 to $100, with most people paying between $5 and $25.
How much does it cost to refinish a 200 sq ft floor?
Refinishing a 200 sq.ft. floor costs between $800 and $1,600, with most people paying around $1,200 to clean, stain, and apply a finish. Refinishing your hardwood floors brings them back to their original shape and shine. Most hardwood floor materials can be refinished four to five times before needing to be replaced. The process involves scuff-sanding down the surface beyond the current finish, removing any blemishes, and applying a color treatment and a top-coat finish, either a water-based or oil-based polyurethane.
What is mildew on hardwood floors?
Mildew occurs when there has been water or flood damage to hardwood floors. The price to fix mildew depends on the extent of the damage and mildew type. A mold remediation specialist can determine the problem cause and extent. The impacted planks are removed before any repair or replacement is made.
How much does it cost to repair cupping?
Repairing cupping in hardwood floors costs between $3 and $8 per sq.ft. Cupping occurs from moisture underneath the floorboards. When moisture interacts with the floor, the side of the boards closest to the moisture expands. This causes it to warp and bend in the form of cupping, meaning the center is lower than the edges, or crowning, where the center is higher than the edges. This issue can be resolved in a few ways. In some cases, it can be reversed by lowering the humidity in the room with a dehumidifier, but it may require refinishing the floor. In other cases, a plumbing consultation is needed to determine if there is a leak. If so, expect to spend $150 to $400 to resolve the issue.
How long does it take for water to dry off hardwood floors?
The longer water sits on a hardwood floor, the more damage it causes. So, dry off the water as soon as possible. Leaving the water for longer than 24 hours increases the chance of having to repair the floor. The process involves replacing the impacted boards and blending them to match the existing flooring, averaging.
How much does it cost to fix a squeaky floor?
Repairing a squeaking floor ranges from $10 to $50 per square foot , depending on the severity. Squeaky floors typically happen after the house foundation settles and the hardwood flooring dries out and shrinks. When you walk around, the boards rub against each other or slide against nails, producing a squeaking noise. There are multiple ways to fix this issue. If the issue is in an individual board, wedging shims between the joist and the subfloor 2 will work. If multiple boards are causing the squeak, it can be fixed by securing them with a cleat or a solid piece of wood.
Can you repair a scratched floor?
For light scratches, small dents, and cupping, there are easy and cost-efficient solutions like buffing out the top layer of the floor or using a dehumidifier. For more severe damage, such as deep gouges, water damage, and mildew, consult a professional flooring contractor.
How much does it cost to repair a floor?
If your floor is only damaged on the surface, you’ll be better off repairing your flooring rather than replacing it. A simple floorboard repair that includes refinishing the surface (which can be necessary with issues like scratches, sun fading and minor water damage) can cost between $3 and $5 per square foot, while replacing a few boards costs, on average, around $200 depending on how many boards need to be replaced.
How much does it cost to fix a squeaky floor?
Depending on the cause, the average cost to fix a squeaky floor is between $200 and $1,000.
Why is my floor sagging?
Sagging can occur as a result of water damage, rotting and destruction of the subfloor and/or floor joists, or even an issue with the foundation of the home.
What happens when you don't level your floor?
When a floor isn’t properly leveled, it can cause gaps and uneven surfaces in your flooring. Sometimes, the problem can be corrected by applying a liquid, self-leveling product similar to concrete.
Can you use a jack to replace joists?
Joist replacement that requires the use of jacks sits at the high end of the cost scale. This procedure, which uses steel jacks to lift your home off the damaged joists, is exceptionally difficult and dangerous, and it should never be attempted as a DIY project.
Can you refinish a scuffed floor?
The decision of whether to refinish or replace your floors is a tough one that goes beyond the cost of the job. While refinishing can work wonders on a badly scuffed surface, deep gashes and bowing or separating boards can’t be fixed by refinishing the surface.
How much does it cost to refinish sanded hardwood floors?
To treat sanded hardwood flooring, you will also have to buy stains and sealants to refinish, which will typically cost between $125 and $225, according to CostHelper. The total cost depends on how many square feet of hardwood flooring you’re tackling.
How long to wait to refinish hardwood floors?
Between each coat of stain or sealant, you must wait several hours before you can walk on the floors, maybe 24 hours if you live in high-humidity areas.
Do you have to cover everything in your house during a refinish?
Then, you must cover everything in your house during a refinish to prevent it from getting layered in sawdust during the sanding phase, which will happen even if you screen off the refinishing area.
How much does it cost to refinish hardwood floor?
The total average cost to refinish hardwood floors for a typical dining room equaling 280 square ft. will run you: $4 to $7.50 per sq ft. depending on options and preparation work.
Refinish Hardwood Floors – Pricing and Installation Cost Checklist
Expect the Refinish Hardwood Floors prices to fluctuate between various companies – each and every company have different operation expenses and over-head.
How much does it cost to replace a floor?
Flooring installation costs $6 to $18 per square foot , depending on the material. Refinishing may not completely eliminate pet urine stains or odors.
How much does it cost to refinish engineered hardwood floors?
Refinishing engineered hardwood floors costs $2 to $6 per square foot on average. Engineered flooring features a base layer with a solid hardwood wear layer on top. Engineered floors may be sanded and refinished 1 to 5 times, depending on the wear layer's thickness.
How much does it cost to refinish parquet floors?
Cost to refinish parquet floors. Refinishing parquet floors costs $2 to $6 per square foot , depending on the type of refinishing and if any repairs are needed. Sanding parquet floors requires special care from a professional because the wood grain runs in several directions.
How long does it take to refinish hardwood floors?
Hardwood floor refinishing is a time-consuming home improvement project and takes 2 to 6 days on average. Hardwood floors should be refinished every 7 to 10 years, depending on thickness, species, and age. Pine, bamboo, and parquet floors require special care while sanding or staining, but costs the same to refinish.
What is refinishing wood floors?
Hardwood floor refinishing in kitchen - before and after. Wood refinishing jobs typically removes pet stains, water damage, scratches, dings, fading, sun damage, discoloration, Polishing, buffing, and recoating cost less but only removes minor scuffs and scratches and adds a new sheen.
How much does it cost to whitewash hardwood floors?
Cost to whitewash hardwood floors. Whitewashing hardwood floors costs $2 to $7 per square foot and requires sanding to remove the old finish and then applying a light wash and clear polyurethane topcoat instead of a darker stain. Whitewashing is also known as pickling. Never use paint to whitewash a floor.
How much does sandless floor refinishing cost?
Sandless floor refinishing costs $1.50 to $4.00 per square foot. Sandless refinishing uses chemicals to etch the old finish off, followed by a tinted finish that hides scuff marks and restores the wood's color and sheen. Sandless methods are not effective for floors with scratches, stains, or damage.
How much does it cost to repair subflooring?
If your floor has extensive water damage, the subflooring may need to be repaired or replaced. Subflooring repairs can run up to $7 per square foot. If the subflooring is loose and squeaky, a contractor can secure it to the joists to eliminate the squeaks.
How much does it cost to remove carpet from a hardwood floor?
Removal and disposal costs between $.25 and $1 per square foot, and removing carpeting from stairs can run from $7 to $10 per step.
What materials are needed to refinish hardwood floors?
Materials needed for refinishing hardwood floors include a drum sander, sanding belt, various tools for prep or repair work, vacuums, plastic sheeting, stain, and topcoat. Larger areas will require more stain and topcoat than smaller areas.
Why do you refinish hardwood floors?
Refinishing hardwood floors will eliminate scratches and gouges and reveal the natural warmth and beauty of the wood flooring. If there is water or UV damage to the flooring, a full refinish will restore the luster and shine. Here are some reasons to consider refinishing your hardwood floors.
How much does it cost to sand hardwood floors?
On average, sanding hardwood floors can cost between $.50 to $3 per square foot. Sanding is done with large drum sanders for most of the area and belt sanders around the perimeter. Sanding usually takes several passes to make sure the hardwood flooring is smooth and blemish-free.
Why is my hardwood floor unstable?
Extreme water damage due to flooding or burst pipes will compromise the structural integrity of the hardwood floor and the subflooring underneath. Or if your home has been the victim of a termite infestation, the flooring may be unstable or too damaged to be refinished. If the flooring is unsafe, repairs and replacement will be needed.
Why is my hardwood flooring turning black?
Boards Are Turning Gray or Black. Even regular cleaning can cause water damage if the protective layer has worn off the hardwood flooring. Water-damaged hardwood flooring will turn gray or black if enough water has soaked into it. The darker the wood is, the more damage it has.
