how much to repair a pool

by Chelsie McClure Published 3 years ago Updated 2 years ago

How Much Do Pool Repairs Cost?

Above-Ground and Inground Pool Repair Prices. Pool repairs cost $605 on average, but it can reach $2,700 if you want lots of work done. ...
Inground Pool Repair Costs. Inground pool repair costs up to $2,700 depending on the scope of the job. ...
Inground Pool Leak Repair Cost. ...
Above-Ground Pool Repair Costs. ...
DIY vs. ...
FAQs. ...

Full Answer

How much does it cost to repair a pool?

To repair an in-ground swimming pool, you will have to spend an average of $1,500. The cost of repairing your pool can also change based on which specific parts require repairs. Repairing parts such as the pool drain and pool pump cost $550 and $1,000 respectively.

How much does it cost to replaster your pool?

Pool replastering typically costs between $3 and $5 per foot. If the average is $4 per foot, you would have to spend around $4,440 to replaster. If stains are your primary problem, you can acid wash the pool instead of replastering.

How much does it cost to refinish a pool?

The national average materials cost to refinish a swimming pool is $1.60 per square foot, with a range between $1.49 to $1.70. The total price for labor and materials per square foot is $4.96, coming in between $4.54 to $5.39.

How much does it cost to reseal a pool?

You could spend a couple hundred dollars or several thousand. Resurfacing usually costs anywhere from $3 to $8 per square foot, depending on the condition of the concrete, your location, and the color, pattern and texture you select. In order to get a more accurate estimate, we recommend seeking quotes from several local companies.

How much does it cost to fix a crack in a inground pool?

Concrete pool repairs cost around $75 per linear foot for small cracks. Larger cracks, spider web cracks, and divots cost more as these issues are more complex and time-consuming. Resurfacing the interior of a concrete pool, including replacing the tile, costs between $10,000 and $20,000.

How much does it cost to revive a pool?

Generally, a pool remodeling job is around $4,822 up to $12,259, and the national average is $8,531. The cost of basic resurfacing of an inground pool will fall on the lower end of that range. Pool refurbishing will fall on the higher end.

How much does it cost to fix a pool that is filled?

The cost to restore a filled-in pool is $28,000 to $55,000 or as low as $11,000 for DIY. Pool restoration costs are equal to the cost of building a new pool, plus additional excavation costs to remove the concrete and dirt backfill mix.

How much does it cost to detect a leak in a pool?

between $100 and $500Most pool leak detection cost between $100 and $500. Along with detecting leaks, companies like Leak Science can develop a plan to repair the leak for you so that you can eliminate the problem in your pool and get back to enjoying it.

Can a filled in pool be restored?

You will need to repair the holes in the shell, and you will probably need new plaster and tile. Pipes might be ok, depends on what they were (pvc or metal) and how they disconnected them. You should be able to locate and inspect the skimmer(s) fairly easily to see if they look to be in good shape.

How do you restore an old pool?

How to Restore a Neglected Swimming PoolSTEP 1: REMOVE DEBRIS. It's now time to remove as much debris as possible. ... STEP 2: DRAIN THE POOL. ... STEP 3: CLEAR THE FILTER SYSTEM & CHECK EQUIPMENT. ... STEP 4: SCRUB THE POOL CLEAN. ... STEP 5: GET IT PROFESSIONALLY INSPECTED. ... STEP 6: FILL IT UP, TEST YOUR WATER & ENJOY!

Can pool leaks be fixed?

Underground leaks can be caused by corrosion or movements in the ground. PVC pipes can be easily repaired unless damage is extensive. Then they have to be replaced. Sophisticated sonar equipment is used by Aquaman Leak Detection to find and fix a swimming pool leak from plumbing lines under the decking.

How do you repair a swimming pool?

0:343:26How to patch and repair a leaking pool - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you do not have to drain the water from your pool in order to patch. This unfortunately does costMoreSo you do not have to drain the water from your pool in order to patch. This unfortunately does cost around 10 bucks at Walmart and it's kind of painted but to open you'll have a little swab.

How do I fix a crack in my pool?

First, drain the pool until it reaches the level below the cracked area. Next, sand the cracked area and cut around the crack with a diamond-bladed saw. Fill the crack with hydraulic cement if it is leaking water. Next, apply the bond coat, followed by the mixed polyester putty.

Where do most pool leaks occur?

Most pool leaks are not in the underground plumbing, although it's every pool owner's worst fear, a large backhoe coming in and ripping up the pool deck. It does happen occasionally, that a leak occurs at a pipe connector under the pool deck, or beneath the skimmer, but repair rarely involves a backhoe.

How do I know if my pool has a leak?

Common Signs Of A Leaking PoolWater Level Changes. Dropping water level is the clearest sign a pool is leaking, but it's important to determine if the water loss is due to evaporation or a leak. ... Cracks or Falling Tile. ... Wet Spots in Yard. ... High Water Bills. ... Water Under Equipment. ... Air or Dirt Blown Into Pool. ... Algae Growth.

How can I tell where my pool is leaking?

Pool Leak Detection: Dye TestCheck the Ground and Walls Around the Pool for Wetness. If the ground is wet where it shouldn't be, your pool is likely leaking somewhere near that area and seeping somewhere in the ground. ... Turn Off the Pump and Water Features. ... Use the Pool Leak Detection Dye to Pinpoint the Leak.

Is there an alternative to Replastering a pool?

Epoxy Pool Painting and Repair as alternative to replaster.

What is the best product to resurface a pool?

Fibreglass- At the risk of sounding immodest, fibreglass is one of the best products to resurface a pool. Why? Because it has been a popular type of pool finish for over 40 years due to its strength, versatility, and cost-effectiveness.

How do you Replaster an inground pool?

1:0710:16How to Plaster a Swimming Pool - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt is necessary to put a finish on a concrete structure pool because the concrete structure is notMoreIt is necessary to put a finish on a concrete structure pool because the concrete structure is not waterproof and will leak.

Can you reshape an existing pool?

Can you change the shape of an existing pool? Certainly. If you want your pool to be bigger, longer, rounder, or some sort of unique space, a professional pool design company can help you with that goal.

How Much Does a Swimming Pool Repair Cost?

The cost of fixing a swimming pool ranges from $10,000 to $20,000 on average. The national average for most basic pool maintenance is $900. The majority of easy DIY fixes are inexpensive and only require a few minutes of work.

What Influences the Cost of Pool Repair?

There are various factors to consider when calculating the cost of repairing a pool, including the size and kind of pool, as well as whether the problem is with the pool itself or with the essential pool equipment.

Pool Repair Costs: Frequently Asked Questions

Your policies will determine this. Your insurance will probably cover the leak if it was caused by a fire or a fallen tree. The insurer is not likely to reimburse you if the damage was caused by regular wear and tear.

How often should I replace a vinyl pool liner?

A vinyl pool liner always needs replacement every five to ten years. Although it can last for over a decade, the liner is still prone to wear and tear. You can spend an average of $5,000 on replacing a vinyl pool liner. The price depends on the thickness and size of the liner.

Is it cheaper to maintain a concrete pool or a fiberglass pool?

Again, pools are different, and their maintenance costs vary. Concrete pools are more costly to maintain, while fiberglass pools are cheaper to maintain. Ensure you settle for the best pool option that will help you minimize the costs of pool repairs.

Cost to Repair Pool by Type

The average cost of repairing an above-ground swimming pool is $600. That is significantly cheaper than the cost of fixing an in-ground swimming pool.

Cost to Repair Pool by Material

You can expect to pay $650 if you’re asking professionals to fix your concrete swimming pool. It’s best to leave the task of repairing a concrete pool up to the professionals because of how tricky it can be.

Cost to Repair a Pool by Part

Pipes are responsible for moving water to and from your swimming pool. Any leaks along those pipes can lead to plenty of wasted water and higher monthly bills. You can hire professionals to fix those leaks in exchange for $400.

How to get rid of a leak in a pool?

Once you identify the most likely places where the leak could be, get into the pool with a pair of goggles and a small bottle of food coloring. Squirt the food coloring next to the area where you suspect the leak. If this is the area, the food coloring should be sucked into the leak.

How much does it cost to repair an above ground pool?

This is because the leak is often easier to see and reach. Most above-ground pool diagnostic fees are around $100 - $180, and patches can be purchased for leaking liners for about $20.

How long do pool lights last?

Most in-ground pools last around 30 years or more with proper maintenance. Above-ground pools last 15 - 20 years.

What does a vinyl pool look like?

In a vinyl liner, this may look like a dark place that will not get cleaned with the vacuum. In a concrete or fiberglass pool, this can look like a crack. If you do not see any visible areas, focus on any penetrations in the pool, such as filters, pumps, and skimmers.

How much does it cost to fix a pool leak?

The average cost to repair a leak ranges from $500 to $3,500, with most homeowners paying around $900 for detecting and repairing a crack in the wall of the pool.

How long does an above ground pool last?

Above-ground pools last 15 - 20 years. Conduct a regular maintenance routine to prolong the life of your pool. Small leaks can be repaired with patch kits. They cost around $20, but you need to follow the instructions carefully to ensure a good repair.

How much does it cost to replace a pool pump?

Equipment failure is the most common cause of leaks in most pools. If your pump is leaking, you will likely need to replace it at a cost of $2,100 to $3,000.

How much does it cost to repair a pool pump?

Repairing the pool pump motor costs $50 to $300 for labor and materials. Each replacement part costs at least $15. If the repairs don’t work, a new motor is $150 to $800. Replacing the damaged pump outright costs $700 to $1,500 as long as the install does not require new plumbing.

How much does it cost to fix an above ground pool?

Inground and above-ground pool repairs cost $240 and $1,056, or $638 on average. Projects typically fall in the $225 to $990 range depending on the pool type, size and materials. Having to replace the main drain and heater can increase the price by thousands more.

How much does it cost to replace a pool light bulb?

Pool light repair costs are much more affordable at $65 to $150 each. Just replacing the bulbs is $20 to $100 for each one depending on their type and functions. Colorful LED bulbs cost the most but last longer than fiber optic and incandescent bulbs.

How much does it cost to repair a fiberglass pool?

Fiberglass pool repair costs $300 to $400 for a gel coat that restores dinged, scratched and cracked surfaces. Expect to pay up to $800 more to repaint after doing the repairs. You also have to cover the cost of draining the water, refilling the pool and applying the right chemicals.

What causes a pool to buckle?

The resulting structure is very dependent on solid ground for stability. Floods and earthquakes and even high winds can cause this framework to buckle and collapse. Your insurance might cover this damage, so read your policy carefully.

How much does it cost to fix a pool?

Pool repairs cost $605 on average, but it can reach $2,700 if you want lots of work done. Labor is typically $80 to $120 per hour, but contractors often quote a flat rate with labor and materials included.

Can a pool crack be repaired?

Although pool crack repair costs more when done by a professional, stopping the leak the first time around is well worth the extra expense. They have the tools and know-how to track down the problem fast and suggest the right fix. Then, they can expertly repair the issue to make your pool look and feel like new again.

What kind of filter do pool owners use?

Pools usually use one of three types of filters: cartridge, sand, or diatomaceous earth (DE). One issue causing filter problems can be that pool owners replace their pool pump with a larger model that doesn’t match the current filter in place. This can push water through the filter too quickly for it to filter the water properly. On the opposite end, pool owners can buy a replacement filter that’s too small for the pump. A new inground pool filter costs $385–$1,600.

How often should I test my pool water?

Test pool water at least once a week for chlorine/bromine, alkalinity, and pH levels. Adjust as needed with chemicals to modify these levels to their default settings. How much chlorine you need depends on the condition of your pool. Swimming pool maintenance kits offer the most ease of use, containing all the chemicals you need for a chlorine pool for the month.

How much does it cost to close a pool in the winter?

The cost of closing a pool for the winter can range from $365 to $650 for pools up to 20’ x 40’ with vacuuming at about $85 per hour, winter filter cleaning at $25 each, and cleaning solid pool covers at $125 adding to the cost.

How does shock work in a pool?

A pool shock helps shock a pool back in line with the way the water chemicals should be. The pill, liquid, or powder contains a mix of chemicals that help kill and control algae, kill bacteria, clear cloudy water, break down oils, and reduce the chlorine smell. It won’t affect the water’s pH level. Most shock treatments will clear up the water, and people can swim in the pool after about 15 minutes. Some pool owners like to shock their pool weekly, while others wait to do it for a specific reason, such as pre or post winter, after a pool party, after extremes in temperature or rain, or an acutely strong smell of chlorine.

What is the basic maintenance of a fiberglass pool?

Basic maintenance includes testing water chemistry, checking filters, settings, and equipment. While a fiberglass pool needs little maintenance, the chemicals required to keep water pH levels right in a concrete pool can be triple those costs.

How much does it cost to maintain an above ground pool?

Inground and above-ground pool maintenance costs $60 to $90 per hour. An above-ground pool might cost more to maintain, though, if it doesn’t have a deck around it, as it makes access difficult for the pool guys.

How much does a chlorine generator cost?

Salt water chlorine generators can cost about $330. They use cells, costing $200 for a simple one up to $1,400 for a high-tech cell that sends you readouts of your water’s salt levels, cleanliness, temp, and flow, saving you testing time. Generator cells chemically change salt into chlorine with an electric charge.

Why renovate an inground pool?

But the main reason why you might want to renovate your inground pool is the breaking down of its surface. Not taking action may lead to: Cracks in the surface material such as tile or plaster. Appearance of white film along the sides of your pool and. Spots of algae sticking to the surface.

Do old pools have safety features?

Old pools don’t have safety features. And if they do, the safety they offer is not up to par with today’s modern pools. If you have kids, then you need to upgrade your pool with VGB-compliant drain covers.

What to use to cover pool replastering?

Paint. If the price of replastering is too expensive, one alternative is to cover it with a thick layer of pool-ready paint. You have to make sure that the paint can hold up to chlorinated water, which will make it more expensive than average paint.

How much does it cost to replace plaster in a pool?

Plaster or Marcite. If you currently have plaster in your pool, it will make sense to replace it with a new layer. This material can also be called Marcite, and it will cost roughly $4 to $7 per foot, not including labor. For a 1000-square-foot pool, you can expect to pay around $5,500 to $6,500 in total.

Why is my pool plaster cracking?

Because concrete is porous, it will allow water to seep into the soil. So, if you’re having to refill your pool regularly, it’s a sure sign that the plaster is cracked or worn off completely. In extreme cases, soil erosion around the pool can cause the concrete shell to crack, which will be much more expensive to repair.

How long does porcelain tile last?

However, it does last the longest, with an average lifespan of 25 to 30 years. You can also choose from a wide array of colors and styles to fit your needs. On the low end, porcelain tile will cost around $4 per foot. Ceramic tile will be roughly $6 a-foot, and glass can be up to $25.

What happens if you run your hand along plaster?

If you run your hand along the plaster and it feels too rough, it’s time for replastering. Cracks and Leaks – Eventually, the surface will wear down so much that the concrete underneath will show through. Because concrete is porous, it will allow water to seep into the soil.

How much does it cost to repaint a house?

Typically, repainting will only cost around $1,500 with labor, but it will wear down faster. In most cases, paint will wear off after a few years, so you will have to maintain it more frequently. Over time, you may spend more than you would on replastering.

Does plaster wear down faster?

Also, if you have a saltwater pool, the plaster will wear down faster. No matter how much you baby it, it will eventually need to be replaced. Here are some warning signs that it’s time for an upgrade.

How much does it cost to resurface a pool?

Average Cost to Resurface a Pool. The cost to resurface a typical 1,000 square foot pool can be as low as $1,000 for a vinyl liner. Gunite and fiberglass can average up to $6,500, including labor. Depending on what you currently have, resurfacing may require completely replacing the pool surface and base.

How long does diamond brite pool finish last?

You cannot spot treat aggregate and will need to completely replace surfacing. Diamond Brite finishes tend to last between 8-12 years before it begins to show signs of age. Many installation companies offer warranties of various lengths if they need to replace the finish.

How much does it cost to paint a fiberglass base?

Your fiberglass or gunite base will cost $1,500 to paint, including labor. While this is option is budget friendly, it will wear down and need repainting frequently. Several common water-resistant paint manufacturers are:

How much does it cost to finish a pool with plaster?

Labor and materials to finish a pool with plaster (also called marcite) will cost $5,500. The pros and cons of this finish are: Pro: Least expensive. Cons: Cracks, stains, and wears down quickly; rough texture. We do not recommend spot-treating cracks, chips, and bubbling for several reasons.

How much does it cost to replace a vinyl pool liner?

The cost to replace a vinyl liner typically falls between $1,000 and $3,500, including labor. Patching will run between $100 and $500, for materials only. The price of the liner depends on its thickness and durability. It serves as the structure and finish of the pool surface.

How much does it cost to add a water feature to a pool?

Price of adding a water feature: $8,000. All of these, as well as other changes contribute to the overall cost of remodeling your pool area. If your pool has become dangerous for children or pets, or if you cannot afford the cost to maintain your pool, you may want to get rid of it entirely.

Can you repair a crack in plaster?

While repairing a small crack or bubble in plaster may be feasible as a DIY project, it is highly recommended that you hire a pool re-surfacing professional in your area to complete this work. Doing this work alone could take many months, and there are complications that could arise.