Repairing Guides

how to blend car paint spot repair

by Richie Dietrich Published 2 years ago Updated 2 years ago
image

  • Clean the repair area with soap and water.
  • Clean area with wax and grease remover.
  • Sand the small area with 600 grit sandpaper. Try to keep the area small to for a smaller blending area.
  • Extend the sanded area using 1500 grit sandpaper.
  • Using a compound, compound the area sanded and around the area that is sanded. This will provide additional adhesion for the clear to bite too.
  • Clean the repair area with soap and water again.
  • Clean with wax and grease remover again.
  • Mask any moldings, chrome or anything you do not want painted. Do not mask on the panel itself. This will leave a hard edge.
  • Spray self etching primer is you sanded to bare metal. Keep the primer area small. ...
  • Spray the basecoat until hiding. You do not need to use the cardboard for this, but keep paint small. Just extend the paint past the primer. ...
  • Apply the first coat of clear and lightly dust Fade Out to the edges of the clear coat. This will help metl the edges.
  • Apply the second coat extending the first coat of clear.
  • Dust another coat of Fade Out to clear edges to help blend edges.
  • Once dry, lightly polish the edge to remove any haze. Care should be taken not to polish too hard, as this may result in removing the blend clear coat edge.

Part of a video titled Car Painting: How to Blend Paint in SMALL Areas! - YouTube
7:07
17:38
That's why it's so important to have a good matching sealer. So we don't have to keep piling ontoMoreThat's why it's so important to have a good matching sealer. So we don't have to keep piling onto piling on more paint and try to get it to blend out in a small area.

How to blend automotive touch up paint?

What You Need To Know About Smoothing Out Touch Up Paint On Car

  • Be Aware Of Car Paint Layers. After the clear coat, the car should ideally be coated with either a layer of wax or be covered with a clear ceramic coating ...
  • Touchup Paint Drying Time. ...
  • Sand, Buff, And Wax In A Circular Motion. ...
  • Correctly Matching The Paint Color. ...

How to revive faded auto paint?

There are s everal factors that can provoke or speed up a car’s paint fading:

  • Natural paint oxidation.
  • Exposure to UV light from the sun.
  • Air pollution and other contaminants.
  • Acid rain and other extreme weather conditions.

How to blend metallic car paint?

Tips for Metallic Paint Jobs. ... The name of the game is not to see how little room you need to do your blend but to make the car look right the first time. Advertisement.

How to blend car paint like a pro?

Required Materials for this Auto Touch Up Paint Project

  • 1/2-oz. vials of touch-up paint and clear coat
  • Assortment of sandpaper grits
  • Bottle of brush-on rust converter
  • Wax and grease remover

image

How do you blend up car paint touch ups?

0:031:53How To Blend Touchup Paint Onto Your Vehicle - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst we scuff sand the surface with either a grey scuff pad or 600 grit sandpaper. Then we applyMoreFirst we scuff sand the surface with either a grey scuff pad or 600 grit sandpaper. Then we apply prep solvent. Next we use a tack rag to remove any lint or dust.

How do you blend spot repairs?

9:2934:30Painting - Spot Panel Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo even though only fix this one little area you know I'm going to sand out here to try and blendMoreSo even though only fix this one little area you know I'm going to sand out here to try and blend blend. In the sanding. So it's gradual feather sand.

How do you blend old and new paint?

Use the Same Paint and Color Using your leftover paint, shake the can before opening. Then open the can and stir the paint. If the paint has thickened over time, thin it down with a thinner or water. Make sure to also use the same paint finish for the touch up.

How do you blend paint to match?

0:0710:27DIY - How To (Blend Car Paint) to Match Metallic or Pearl Color - Fade ...YouTubeStart of suggested clipEnd of suggested clipAnd today we're going to show you how to blend paint. The first of all the thing that you want to doMoreAnd today we're going to show you how to blend paint. The first of all the thing that you want to do is you want to be able to mix your paint up and make sure that it is a blendable.

12 oz Base Coat Color

Please select a color first, or use the search tool on the left to view color samples.

Assorted Wet Sandpaper Pack

Wet sanding with this waterproof sandpaper cleans the grit and washes away debris as you work, leaving a smoother finish in less time than dry sanding alone. Ideal for color sanding to a glass smooth finish. Five grits from fine 180 to ultrafine 1500 should handle most any repair. Sandpaper Selection Chart

Gold Tack Cloth

Our "gold standard", this tack cloth is the final step before spraying primers and paints. Removes airborne dust and debris from the surface immediately prior to painting. Just a light wipe, then paint!

2 oz Prep Solvent

Don't let a finger print ruin your repair! This prep solvent removes, wax, grease and oils from your fingertips, leaving a clean surface free of contaminants that could ruin your paint job.

What is blending car paint?

What is blending? Figuring out how to blend car paint is the art of making the lines between your vehicles paint and your OEM car touch up paint vanish. You take your car spray paint and apply it to the existing paintwork to give the illusion of them blending into one. Blending your automotive touch up paint gives the same kind ...

How long to blend spray paint?

Below are the steps on how to blend spray paint: Shake your paint can for 1-2 minutes to mix the color properly.

Why is blending important in touch up paint?

On top of that, even with the perfectly matched OEM touch up paint we provide, color differences can still occur because of the environment you paint in, so blending is crucial to minimizing the disparities. Overall, you don’t want to apply auto touch up paint to your vehicle to ruin your beautiful car’s look. That is why blending is essential.

How long to shake paint can?

Shake your paint can for 1-2 minutes to mix the color properly. Depress the spray tip to give it a test run and get an idea of the pattern. Start with the edges of the damaged areas first then work in. Your first coat should try and cover the primer, then taper as you go.

Is it cheaper to repair a car paint kit?

Purchasing a car paint repair kit has several benefits. Not only are they significantly cheaper than going to a professional, but you also save yourself a lot of time and can work around your own schedule. However, you shouldn’t have to compromise on a great finish, and this is where blending comes in. Getting instructions on how ...

Can you blend paint before you check for color match?

Let the paint dry completely before you check for the final color match as it can look lighter or darker prior to being completely dry. Discovering how to blend paint on your car will leave you with a superior finish that will make your car shine like it just rolled off the factory floor.

Sand the Area

Don’t feel alarmed. Using sandpaper on your vehicle won’t damage it. In fact, when it comes to touch up paint jobs, sanding down the scratched area removes dirt. Buffing out this area ensures a smooth paint application. Don’t stress if you remove some paint during this process.

Tape off Any Unpainted Areas

Next, use painter’s tape to protect the areas on your vehicle that you aren’t painting. Always tape off hood ornaments, windows, and windshields. Cover up the respective areas on your car depending on the type of applicator you use. Small touch up jobs don’t require you to tape large sections.

Apply the Auto Paint

Now you’re ready to apply the auto paint. Put on the applicator through many base layers across the area. The type of paint might affect the number of coats you need. Enamel paints typically require three colorcoats, whereas lacquer paints require six to eight.

Finish With Clearcoat

The last step for achieving the perfect blend is another easy tip to blend paint on your car. You simply need to apply a clearcoat primer. Finishing primers add a layer of paint protection while also leaving a shiny new look on that area. Apply around two to three layers of a clearcoat to achieve the desired finish.

How to spray self etching primer?

Spray self etching primer is you sanded to bare metal. Keep the primer area small. Tip: Cut a small hole in a peice of cardboard and hold between the spray gun and the panel. This will help keep the primer area small without leaving a hard edge. Spray the basecoat until hiding.

How to remove haze from clear coat?

Apply the second coat extending the first coat of clear. Dust another coat of Fade Out to clear edges to help blend edges. Once dry, lightly polish the edge to remove any haze. Care should be taken not to polish too hard, as this may result in removing the blend clear coat edge.

Can you spot repair a PPG?

Many paint companies do not recommend performing a spot repair. PPG recommends to clear to the nearest break line such as the edge of a panel or clean break line. However, PPG also provide direction of how to perform this, if the painter chooses to do so.

How long does it take for a car to be painted?

Condensation that occurs when a car goes from being cold to warm can effect how paint adheres to the car. Sometimes it can take five to six hours for a car to be warm and condensation free before starting the painting process. A bad auto shop will not wait long enough if they are in a hurry.

What are some common mistakes when mixing paint?

Common Mistakes When Blending Paint. You wouldn’t think paint to be so temperamental when it comes to your car. After all, it has to endure the abuse from the hot sun, ice, hail, rocks, shopping carts, parallel parking, etc. However, when it comes time to paint your car, it can be a very tedious and difficult task that even “professionals” tend ...

Where is the paint code on a car?

Every car has a specific paint code that is usually labeled on the inside of the drivers side door frame. Even with the correct paint code, there can still be up to 10 different variations on some paint codes. This can cause the new paint to be slightly off color from the original.

Can you tap paint off a small area?

You can see how hard it is to blend paint together when taping off only a small area. To make sure that new paint blends nicely with the original color, a large surface area is required. Most of the time, taping off an entire panel is the correct way of blending paint.

Can you blend paint over two car panels?

You can see from the image below that blending the new paint required a surface area that spanned over almost two whole car panels. Some auto shops are known to skimp in the blending process to save money on paint and labor. This can create uneven coloring between two panels.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9