
DIY Paintless Dent Repair
- Use Aluminum Foil, a Lighter, and Canned Air. One basic method is to place a piece of aluminum foil over the dent.
- Use a Hairdryer and an Air Duster. A similar method to apply a change in the metal's temperature is to heat up the...
- Apply Suctioning. Purchase a dent removal kit from an auto parts store. Place the suctioning tool found...
Full Answer
How does paintless dent repair work?
This is how a traditional method of paintless dent repair works. However, sometimes you get dents with limited access. In that case, you can use other methods of paintless dent repair such as glue pulling, blending, or heat magnetic induction. Paintless dent repair techniques. There are four widely used techniques of paintless dent repair.
What is the cleanest method of Dent Repair?
Paintless dent repair is known to be the cleanest, the only environment-friendly method of removing dents. This method doesn't use any chemicals or paints and is safest way of removing dents.
What do you look for in a dent repair?
Size and depth of the dent. How big is the dent? Is it a size of a golf ball, watermelon or bigger? Larger and sharper dents require more expertise to get that perfect result.
How do we fix dents and dents in the panels?
We use special PDR tools to gain access from behind the dent and slowly massage dents out until we get the panel back to pre-accident condition. It is the only way of repairing small damages without re-paint or sanding and grinding.

Does paintless dent repair really work?
Since paintless dent repair can remove 80-90% of dents, it is the best way to get a dent out of your car. If we can access the area behind the dent, we can often massage out the dent with the Paintless Dent Repair process.
How do I make paintless dent repair?
0:184:25DIY | Cheap, Quick and Easy Paintless Dent Removal on an F30 ...YouTubeStart of suggested clipEnd of suggested clipAll right the first dent that we're going to pull out is pretty tiny I just put a piece of tapeMoreAll right the first dent that we're going to pull out is pretty tiny I just put a piece of tape above. And below. So it's right there. So if I do things like put my sticker over it.
Can I pop out a dent myself?
Heat the dented area of your vehicle with a hair dryer at the highest setting possible. Get it as hot as possible and then use a can of compressed air to blow on the dent. The cold air will contract the plastic and allow the dent to pop out on its own.
Do it yourself hail dent removal?
Leave the car in direct sunlight so that it heats up and is hot to the touch. Place small pieces of dry ice in the center of the dents for a few seconds and remove them. The dents will pop out on their own. Wipe the area down with a soft clean cloth.
How do you pop out a dent?
First, heat the dent with the hairdryer approximately six inches away for about 30 seconds. Then cover the dent with a piece of aluminum foil and rub dry ice over it. The rapid change from hot to cold should make the dent pop out within a minute or so. Another temperature trick involves boiling water.
How do you massage out a dent?
1:453:29Dent Repair Using a Finger - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight now I'm on the back side the dent right. Here. I'm moving the hammer around. And a circularMoreRight now I'm on the back side the dent right. Here. I'm moving the hammer around. And a circular motion on the back side working this backside of the dead.
Can you fix a dent with boiling water?
Use boiling water Simply boil water in a teapot, protect yourself from burns with rubber gloves, and have a pot of cold water on hand. Then, pour the hot water from the teapot over the dent. Before it cools down, pop the dent out from the inside.
How do you pop out metal dents?
0:413:15How to Remove Car Dents Fast - YouTubeYouTubeStart of suggested clipEnd of suggested clipSome water on your stove in a big pan. And pour it all over the dent area then put the suction cupMoreSome water on your stove in a big pan. And pour it all over the dent area then put the suction cup on it'll all batter. Plus the heat off and makes the metal. Get more flexible.
How do you pop a door ding?
If you can't access the dent from the inside, try using a hair dryer to warm up and expand the outer surface. You'll need access to compressed air to make this method work. Once the dented area is warm, try spraying it with the compressed air to cool it quickly and contract the material, The dent just may pop out.
What is the best glue stick for PDR?
10 Best Pdr Glue Sticks Recommended By An Expert#Product1Tabweld KECO Gray PDR Glue Sticks (10 Pack)Buy on Amazon2Top Secret P.D.R. Money Green Hot Glue This Stuff is MoneyBuy on Amazon3Top Secret P.D.R. Glue Summer Red for use on Panels up to 90 Degrees Ambient Temperature.Buy on Amazon7 more rows
Do dent pullers work on hail damage?
Experts say that between 80% to 90% of hail dents can be repaired using paintless dent repair (PDR) techniques. Because the possible damage caused by hail can vary so widely, using paintless techniques is one of the best ways to restore your car's panels to the original condition.
How do you use dry ice to remove dents?
For low-cost dent repair to your car, try dry ice. Park your car with the dent in the sun and let the dent and surrounding sheet metal warm up. Then, wearing protective gloves, put a small block of dry ice over the dent. The rapid chilling of the metal will "pop" the dent without scratching the paint.
How do you use a dent puller suction cup?
0:252:03How to Use A Dent Puller. - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's just a big suction. Cup just a big old suction cup you put a little water on there you get itMoreIt's just a big suction. Cup just a big old suction cup you put a little water on there you get it to make a tight grip on the body of your vehicle near.
How do you get a dent out of a car with hot water?
Use boiling water Simply boil water in a teapot, protect yourself from burns with rubber gloves, and have a pot of cold water on hand. Then, pour the hot water from the teapot over the dent. Before it cools down, pop the dent out from the inside.
How to fix a dent in a metal body?
Apart from the suctioning cup, a dent repair kit will also contain a dent pulling tool. Place this over the dent. Then, pull hard so as to make the dent pop out. When this is achieved you may use a small hammer to push it back more linearly with the rest of the body as it may protrude a bit outwards at first. It is best to fix a board or a block of wood at the back of the metal while doing this.
How to get rid of a dent in a car?
One basic method is to place a piece of aluminum foil over the dent. Then, switch on a lighter and hold the flame right over the foil for half a minute or so. Flip a can of compressed air upside down and spray so that the liquid comes out and covers the foil area.
How to remove a dent from a metal roof?
Wipe with a soft cloth to remove any traces. 2. Use a Hairdryer and an Air Duster. A similar method to apply a change in the metal's temperature is to heat up the area where there is the dent with a hairdryer. Then, after about a minute, spray the heated patch with compressed air.
How to fix a small ding in a car?
When you get a small ding in your car, try repairing the dent yourself rather than hiring a professional. Before trying any of these methods, inspect the dent. Some dents may be fixed easily while others may require more extensive repairing. Next, acquire the tools for whichever method you'd like to try first.
Can you use a plunger to pop a dent?
Alternatively, if you do not wish to buy such a kit, you can always use a toilet plunger. If the dent is not complicated, this will lead to the metal to pop back in place linearly. You may try to repeat more than once so as to try and achieve a bigger suctioning.
How to repair a dented metal car?
Once the area has been mapped out, the repairer will need to apply a variety of different types of pressure to gradually ease the dented metal back into shape. Since dents have to be smoothed out from behind, interior paneling may need to be removed from the car during the process and put back in place when the repairs are done, but no permanent replacements should have to occur.
How much does it cost to fix a paintless dent?
As far as the exact cost of paintless dent repair goes, you should expect it to be somewhere in the range of $50-$400. Small dents, such as those on the doors tend to be cheaper than larger areas of damage, but paintless repair should remain affordable even in cases of large collision damage.
How Much Does Paintless Dent Removal Cost?
However, small dent repair costs are usually low and it can be worthwhile to spring some money on them. While a lot can depend on the specifics of the damage, such as how big the dent is and where it’s located , it’s usually safe to safe that paintless dent removal can be a much cheaper option than traditional restoration. It can also be worth keeping in mind that while repainting often lowers the resale value of your vehicle, paintless repair, when done well, shouldn’t make a noticeable impact on how much money you can get for the car later.
Will Paintless Dent Removal Work on Your Car?
Most of the time, small dents can be successfully repaired without extensive body work. The exceptions can be for very large areas of damage or damage where the metal has been stretched too far beyond its original shape.
Is paintless repair better than traditional repair?
Another interesting benefit of paintless repair can be that it is more environmentally friendly than traditional repair, as none of the chemicals that would be released into the air during repainting are needed. While this may not be the biggest selling point of paintless repair, it is another good thing to keep in mind.
Is it cheaper to repair a dent or paintless dent?
While a lot can depend on the specifics of the damage, such as how big the dent is and where it’s located, it’s usually safe to safe that paintless dent removal can be a much cheaper option than traditional restoration.
Can dents be repaired?
Luckily, dents can be repaired to restore the look of your vehicle. Dent repair can sometimes seem like a costly and unpleasant task, but this doesn’t always have to be the case.
What Is Paintless Dent Repair?
Paintless dent repair (or PDR) is widely considered the most cost-effective, quickest, and most environmentally friendly solution to vehicle dent repairs. A good analogy would be a minor scratch on your arm compared to a more severe cut or laceration. Traditional auto body repair would be a comparable treatment option to stitches or surgery. PDR, in this analogy, would be the treatment option for the more minor injury.
What Dents Qualify for Paintless Dent Repair?
Light or minimal hail damage, impacts from stray balls in the driveway, and other “door dings” usually qualify for PDR.
Can I Do Paintless Dent Repair Myself?
Before you decide, consider if you have the time, patience, and necessary tools. PDR tools need to be used correctly for the best results, which takes practice. If you have time to spare, or find yourself dealing with this unfortunate damage frequently, then it might be wise to learn. However, it is imperative you do not overcorrect the dent.
What Tools Do I Need?
Here are three kits we would recommend if you want to try paintless dent repair at home.
How to achieve PDR?
PDR is typically achieved via a series of crucial steps: Analyzing and accessing the damaged area. Removing the affected area panel to gain access to the posterior side of the dent. Slowly applying continuous pressure to both sides to work out the dent (without overcorrection).
How long does it take to replace a dent in a car?
If the dent is minor, the wait time is similar to that of getting your tires replaced. It will take a few hours at most. However, if there is extensive damage, like what might occur after a hail storm, the process could take several days.
What happens if a door dent is bigger than your fist?
If the dent is wider than your balled-up fist, or goes deeper into a door or panel than a half-inch, alternative measures are probably your best bet.
What Is Paintless Dent Repair?
Paintless dent repair (PDR) is a way to repair dents and hail damage when there is no damage to the paint on the car. With specialized tools, dents are repaired by applying pressure from the inside to remove the appearance of the dent. No paint is required — as the name suggests.
How to repair a dented car?
In order to repair the dent, a technician will usually need to remove part of the interior of the car and use specific specialized tools to smooth out the metal from the inside out. When the metal on a car is dented, the metal is actually stretched.
What Tools Are Required for Paintless Dent Repair?
Removing dents via PDR required some serious tools. Unless you have experience and training with paintless dent repair, you should not attempt to repair the dent.
Is Paintless Dent Repair Right For My Business?
After reading this article, you now know the answer to, “how does paintless dent repair work?”. If you are a PDR technician or work at a body shop that does not currently offer PDR you should seriously consider it.
What is PDR in car repair?
You can offer them a quick, reliable solution to get their car fixed and remain a loyal customer. It’s called paintless dent repair (PDR), and the article below will walk you through all the questions you may have.
How long does it take to repair hail damage?
It could be several hours to just one day instead of several days to a week. You can get the car back into shape quickly and keep the customer happy. However, if there are many small dents, like the ones from hail, this could take a technician longer than one single dent.
How much does it cost to fix a dent?
Generally speaking, one dent that is less than an inch in diameter will cost between $75 and $125. Dents larger than one inch could cost anywhere between $150 and $350. And in some cases, the cost may be even higher.
How does paintless dent repair work?
To find out how paintless dent repair work, let's break down the process in a few different steps .
How many techniques are there for paintless dent repair?
There are four widely used techniques of paintless dent repair. You choose one that works best for you depending on size, depth, complexity, location of the dent, and type of metal.
How long does it take to repair a dent in a car?
With a paintless dent repair method we can get your car back on the road the same day. Most of our repairs take 2 - 3 hours. A door ding size of a quarter or smaller on a flat surface may take about 30 minutes only. Environmentally Friendly Solution.
What is paintless dent removal?
Paintless dent removal is the best solution for removing body line dents and creases, door dings, hail dents that are caused by a hail storm and more. PDR also utilizes a "push to paint" or "push to prep" technique. This technique allows you to reduce the use of body filler on the damaged panel before painting.
How much does a small PDR light cost?
Small lights are portable and great for all around use. Prices for smaller portable PDR lights range from $400 to $650 and for shop lights from $800 to $1500 with all necessary accessories and batteries. ( Image Source ) How long does it take to learn paintless dent repair.
How to repair dents in a car?
This is a traditional way of repairing dents and done by using specialized hand tools such as rods, picks, hooks, wire tools, whale tails, flat bars and more. These tools allow you to gain access from the backside of the dent and apply pressure to massage the dents out.
Where did Oscar go to repair dent?
One day, after massaging a small dent out, the result looked perfect and didn't need traditional bodywork and paint. After the show, Oscar went back to Germany and continued developing paintless dent repair. Soon, he invented paintless dent repair tools of different shapes and sizes.

Use Aluminum Foil, A Lighter, and Canned Air
Use A Hairdryer and An Air Duster
- A similar method to apply a change in the metal's temperature is to heat up the area where there is the dent with a hairdryer. Then, after about a minute, spray the heated patch with compressed air. Again, you should hold the can upside down so that the liquid is released, not just air. A layer of ice will form over the dent. When the ice begins to melt the dent should pop back and be fixed…
Apply Suctioning
- Purchase a dent removal kit from an auto parts store. Place the suctioning tool found in the kit over the dent you wish to repair. This is often in the shape of a cup with a string at the other end. You have to pull the string in order to apply the pressure in the space encompassed between the cup's interior and the vehicle's metal. Alternatively, if you do not wish to buy such a kit, you can …
Using Other Tools from The Dent Repair Kit
- Apart from the suctioning cup, a dent repair kit will also contain a dent pulling tool. Place this over the dent. Then, pull hard so as to make the dent pop out. When this is achieved you may use a small hammerto push it back more linearly with the rest of the body as it may protrude a bit outwards at first. It is best to fix a board or a block of wood at the back of the metal while doing t…