how to fit hinge repair plate

I had to recess the 2 holes in the cabinet side to allow the plate to sit flush on the cabinet side and then screw the repair plate into place with the 4 screws provided. After refitting the soft close hinge and making some adjustments the door shut nicely. I highly recommend these plates and I will buy another set as a spare.

Full Answer

What is a replacement hinge repair kit?

Checking availability... This replacement hinge repair kit comes with everything required to fix kitchen hinges to cabinets. Use it to fix damaged hinge fixing holes on a cabinet carcass. The hinge mounting screws do not go in the holes - manufacturing defect.

How to install a repair plate on a kitchen cabinet?

Firstly the larger screws for the 2 holes in the plate DO NOT FIT. They are too narrow and will not hold. However the original plate screws fitted fine. I had to recess the 2 holes in the cabinet side to allow the plate to sit flush on the cabinet side and then screw the repair plate into place with the 4 screws provided.

Why won't the screws go in the hinge mount holes?

The hinge mounting screws do not go in the holes - manufacturing defect. One other reviewer had this issue I suggest you avoid them they can not be made to work Purchased similar item elsewhere but didn't work (holes to big for screws).

Can hinges stripped out of a cupboard carcass be done?

Yes " Hinges stripped out of a cupboard carcass - what can be done? I couldn’t think of a solution that might last and then discovered these. Brilliant. Cheap, everything needed is included, job completed in 5 minutes. Really simple to use. " 5 of 8 people found this review helpful. Was this review helpful? Yes No (Report Review)

How do you install hinge plates?

0:151:29Installing Hinge Plates - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn the two holes. Line them up in there. Press straight down use your impact driver or yourMoreIn the two holes. Line them up in there. Press straight down use your impact driver or your screwdriver whichever you have down until it's tight. Do the same with the other. And you're done.

How do you fix a broken cupboard hinge?

1:009:35How to fix door hinges - cupboard cabinet repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd now we've got a nice solid hinge nice and simple simply by replacing the screws with something aMoreAnd now we've got a nice solid hinge nice and simple simply by replacing the screws with something a little bit larger in diameter.

What is a hinge mounting plate?

A mounting plate is the part of a hinge, handle or latch that mounts the hardware to a cabinet. Mounting plates make it easier to attach doors to frames. A mounting plate is the portion of a hinge that attaches to the wood. Mounting plates can be used in doors, cabinetry and furniture.

How do you reattach cabinet hinges?

0:100:53Attaching doors and adjusting hinges | kaboodle kitchen - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply line the hinge up with the hinge plate. And click into position to adjust doors use theMoreSimply line the hinge up with the hinge plate. And click into position to adjust doors use the screws on the hinge. And the hinge plate.

How do you put clips on hinges?

2:394:56Hettich Restrictor Clip Installation Video (full) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe next step is just to reinstall the hinge in the in the door once again so everything as you'veMoreThe next step is just to reinstall the hinge in the in the door once again so everything as you've done in Reverse. The same again. And with the phillips screwdriver.

How are hinge plates measured?

6:1310:22How to measure cabinet openings, install hinges, and hang ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow the first step is to attach a straightedge or draw a line below the cabinet opening. For a 1/2MoreNow the first step is to attach a straightedge or draw a line below the cabinet opening. For a 1/2 inch overlay doors. This line will be 1/2 inch below the opening.

What is a mounting plate?

A mounting plate is the part of a hinge, handle or latch that mounts the hardware to a cabinet. Mounting plates make it easier to attach doors to frames. A mounting plate is the portion of a hinge that attaches to the wood. Mounting plates can be used in doors, cabinetry and furniture.

How do I know what Blum hinge I have?

You will find the Blum logo embossed on the housing of clip-on BLUMOTION.

How do you fix a cabinet hinge that won't stay closed?

Use a screwdriver to turn them both clockwise one-quarter turn at a time to add tension to the internal spring. Test the door. If it still won't close, turn the adjusting screws one-quarter turn at a time until the door closes and stays closed.

How do you fix a stripped screw hole in a cabinet hinge?

Remove one loose hinge screw. Dip four or five wooden toothpicks into woodworking glue and then stuff them into the hole. Break the toothpicks off at the surface and replace the screw. If the holes are larger than about 1/4 inch, pack them with wooden matchsticks dipped in glue.

How do you fix a spring on a cabinet hinge?

2:4911:01Cabinet Door Hinge Springing Open Track Down Which Bad ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd what you can do is loosen that set scoop pull the bolt door forward just fix a spring that'sMoreAnd what you can do is loosen that set scoop pull the bolt door forward just fix a spring that's funny hinge alright let's give it a shot here ah.

How do you fix a wood door hinge?

0:183:54How To Repair Stripped Door Hinge Holes. Fix stripped wood screw holes.YouTubeStart of suggested clipEnd of suggested clipUse some gorilla glue and a hammer put some glue on the golf team you're going to drive it into thatMoreUse some gorilla glue and a hammer put some glue on the golf team you're going to drive it into that hole let it dry and then once it's dry. Then you take it screw the screw into it.

How thick is a hinge plate?

The plate is around 1mm thick but that to me is enough to warrant balancing out the hinges, using the plates on both.

What is the purpose of the plate in a cabinet hinge?

The original holes in the cabinet are stripped so needed the plate to retain the screws for the hinge.

Can bolts hold hinge mounting?

Bolts wont hold the hinge mounting. Same brand of hinge used, the hinge mounts supplied with the hinge AND the bolts supplied with the repair plates are two small and wobble in the hinge plate hole. Asked by: Carpentermel. wrong size of screws. The screws supplied are not retained by the plate, pull straight out.

Features and benefits

This replacement hinge repair kit comes with everything required to fix kitchen hinges to cabinets. Use it to fix damaged hinge fixing holes on a cabinet carcass.

Excellent

Fits perfectly, although you may have to use the supplied hinge mounting screws instead of the ones already fitted to your hinge. Job was done in 5 minutes and is rock solid. Great value repair kit.

Junk - holes too small for mounting screws

The hinge mounting screws do not go in the holes - manufacturing defect. One other reviewer had this issue I suggest you avoid them they can not be made to work

Great Idea

Purchased similar item elsewhere but didn't work (holes to big for screws). This one was cheaper and appears to solve the problem.

Perfect!

Oh my lord these are a godsend! I managed to "blow" the existing holes and this made them unstable. These reinforced the existing screw holes, and for £1 a pair they are a "buy just incase"

Great idea

It was a nightmare getting it on, but once it's on, it's a dream, finally repaired the hanging door which no handyman could fix. I read recent reviews about the screws being too small for the holes, I also thought so, and I was tried to enlarge the holes but the screws ended up slipping through.