Acer laptop stuck in loop preparing automatic repair can't get out of loop help
- Power off the laptop.
- Power on the laptop.
- As soon as you see the rotating loading circle, press and hold the Power Button until the computer shuts off.
- Repeat this process a few times until you see the "Preparing Automatic Repair" screen.
- Now you want to let the laptop boot to the "Automatic Repair" screen.
- Click "Advanced Options" and then select "Troubleshoot".
- Here you want to select "Refresh your PC", if you do not wish to erase data, or "Reset your PC" to erase all data and restore your system.
- From here just follow the screen instructions until the recovery is completed.
How to start automatic repair?
While in the Advanced startup environment, use the following steps to use Startup Repair:
- Click the Troubleshoot button.
- Click the Advanced options button.
- Click the Startup Repair button.
- Select your account.
- Type your account password.
- Click the Continue button. Quick Tip: If your computer is loading correctly, using this tool, you'll get the "Start Repair couldn't repair your PC" message because there's nothing that needs ...
How to start automatic repair Windows 10?
Enable or Disable Automatic Repair in Command Prompt at Boot. 1 Open a command prompt at boot. 2 Type bcdedit into the command prompt at boot, and press Enter. (see screenshot below) A) Look under the Windows Boot Loader section for your Windows 10 (description), and make note of its identifier (ex: " {default}").
How to perform automatic startup repair in Windows 10?
The Tutorial to Launch Startup Repair in Windows 10
- Boot to Advanced Startup Options.
- Click/tap on Troubleshoot.
- Click/tap on Advanced options.
- Click/tap on Startup Repair.
- If prompted, select an administrator account to provide credentials for approval. ...
- Start Repair will now start "Diagnosing your PC", and attempt to automatically repair it.
How to fix automatic repair loop in Windows 10?
Scenario 1: You See A Black Screen with "Preparing Automatic Repair" Loop Message
- Method 1: Use Command Prompt to Erase Problematic Files. Deleting the problematic file from the system files helps in restoring the computer to working condition.
- Method 2: Disable Automatic Startup Repair. You can disable the automatic startup using the command prompt. ...
- Method 3: Restore Windows Registry. ...
- Method 4: Refresh or Reset Your PC. ...
How do I fix my Acer stuck on preparing automatic repair?
0:007:50How To Fix Acer PC Preparing Automatic Repair Restart Loop in ...YouTubeStart of suggested clipEnd of suggested clipOptions click on troubleshoot click on advanced options click on startup.MoreOptions click on troubleshoot click on advanced options click on startup.
How do I fix my computer when it says preparing automatic repair?
How to Fix Preparing Automatic Repair Loop with Black ScreenFix 1. Perform a Hard Reboot.Fix 2. Boot into Safe Mode.Fix 3. Disable Automatic Repair.Fix 4. Refresh or Reset PC.Fix 5. Fresh Install or Reinstall Windows 10.
How do I turn off automatic repair?
To disable Windows 10 automatic repair tool, follow these steps:Open the Windows boot troubleshooting menu.Select See advanced repair options > Troubleshoot > Advanced options > Command Prompt.Type the following command and press Enter: bcdedit.Check the values for identifier and recoveryenabled.More items...•
How do I stop Windows automatic repair?
How to Disable Windows 10 Automatic Repair at StartupOpen the Command Prompt as administrator and run the bcdedit command: ... To disable automatic repair at Windows 10 startup, execute this command: bcdedit /set {current} recoveryenabled no.More items...
What causes preparing automatic repair?
If you still receive the "Preparing Automatic Repair" or "diagnosing your PC" error message after reinstalling Windows, this issue might be related to your computer's hardware. For instance, Preparing Automatic Repair error in Windows 10 happens because this PC has a failed or failing HDD or SSD.
How do I bypass automatic repair on Windows 10?
In Command Prompt, type bcdedit /set {default} recoveryenabled No and press Enter. Restart your PC, the Automatic Startup Repair should be disabled and you might be able to access Windows 10 again. If you need to again enable it, you can type bcdedit /set {default} recoveryenabled Yes in CMD and press Enter.
What do I do when my HP laptop says preparing automatic repair?
Turn on the computer by constantly pressing the F8 key; In the options that appear, click on Troubleshooting; Now click on Advanced Options; Under Advanced Options click on System Restore, choose a date and proceed with the screen directions.
How to reset a acer?
Re-try an ALT+F10 cold boot factory reset as shown in the video below. Press the ALT+F10 sequence immediately after turning the machine on. Don't wait for the ACER logo to appear. Jack E/NJ
How to turn on ACER?
You gotta be quick with the ALT+F10 routine. Completely shut down the machine by pressing and holding the power button for 5 seconds or more. Then turn it back on an ***immediately & simultaneously**** press & hold the ALT key while tapping the F10 key. Don't wait for any ACER logo to appear cuz by then it's already too late. Jack E/NJ
What Causes the Preparing Automatic Repair Error?
Hardware failure is usually the primary reason behind this error. However, there are other reasons that may also lead to the problem, such as:
Simple Methods to Fix Preparing Automatic Repair Windows 10 Error
Here are some easy-to-use solutions to fix the Automatic Repair Windows 10 error.
Why does Windows 10 have automatic repair?
Automatic Repair is a built-in feature in Windows 10 to deal with some system problems when the computer cannot boot properly. However, in some cases, Automatic Repair may not work and get stuck in the infamous Windows Automatic Repair loop.
How to force restart a computer?
- Force restart your computer by removing the battery and the AC adapter. Then plug the power back in and hold the power button for 20 seconds to see if the computer starts normally.
What is automatic repair?
Automatic Repair is a feature introduced in Windows 10/8 that can fix some PC issues when the computer cannot boot properly.
How to fix auto repair loop?
8 Solutions - Fix Preparing Automatic Repair Loop Windows 10 1 Remove the battery and AC adapter. 2 Press and hold the power button for 20 seconds and see if it will boot up normally.
How to re-build a boot record?
Step 1. Insert the Windows bootable installation disk into your PC that has "Preparing Automatic Repair" or "Diagnosing your PC" error message. Step 2. Boot your PC from the installation disk. Step 3.
How to fix a computer that won't boot?
If your Windows cannot boot because of the "Preparing Automatic Repair" or "Diagnosing your PC" error, you can do a hard reboot. Remove the battery and AC adapter. Press and hold the power button for 20 seconds and see if it will boot up normally.
Why does my computer go to black screen?
Automatic Repair is a feature introduced in Windows 10/8 that can fix some PC issues when the computer cannot boot properly. But sometimes due to some reasons, Windows Automatic Repair might fail to work and get stuck in diagnosing your PC. It will go to a blue or black screen of death error.
What to do when your computer is stuck on the "Preparing Automatic Repair/Diagnosing your PC"?
When the computer is stuck on the "Preparing Automatic Repair/Diagnosing your PC" screen or the computer's screen goes black and stops respond ing, you can run the PC from Windows installation CD/DVD and boot into Safe Mode to fix this issue.
What happens if you create a restore point before the automatic repair loop occurs?
If you have created a Windows restore point before the Automatic Repair loop occurs, you can perform a system restore to cope with the issue.
How to change boot sequence in BIOS?
For most users, it works well when they restart their computer and press F2 at the same time to enter BIOS. Set to boot the PC from "Removable Devices" (bootable USB disk) or "CD-ROM Drive" (bootable CD/DVD) beyond Hard Drive. Press "F10" to save and exit.
What happens when an auto repair fails?
When an Automatic Repair fails, your computer will get a blue screen with "Your PC did not start correctly" or "Automatic repair couldn't repair your PC." If you click "Restart", the computer will go through the same process, resulting in the Automatic Repair loop.
What is the solution to an endless 'Preparing Automatic Repair' loop?
The official Microsoft solution to an endless 'Preparing Automatic Repair' loop is to refresh or reset the PC directly.
What happens when the registry is corrupted?
When Registry corrupts, it may lead to serious problems like the Automatic Repair loop. The good news is that the registry makes a backup of configuration data automatically. You can use the backup to restore the Windows registry to a working version. Step 1.
