how to fix startup repair loop

^{Fix Automatic Startup Repair Loop in Windows 10, 8 and 7}

• Solution 1: Running check disk to see if your hard drive is the problem. Chkdsk could be used to check and repair your hard drive for filesystem corruption. ...
• Solution 2: Manually attempt to rebuild the BCD and repair MBR. Running the bootrec utility to rebuild the BCD / MBR might fix the automatic repair loop problem. ...
• Solution 3: Disable Automatic Startup Repair. If the automatic repair couldn’t really repair your PC and just get you stuck in a repair loop, it’s better to disable the automatic ...
• Solution 4: Restore your Windows registry. A corrupted registry settings can also cause a auto-repair loop. Here is how to restore your registry from the RegBack directory.

Full Answer

How to run Windows 10 Startup Repair?

The Tutorial to Launch Startup Repair in Windows 10

1. Boot to Advanced Startup Options.
2. Click/tap on Troubleshoot.
3. Click/tap on Advanced options.
4. Click/tap on Startup Repair.
5. If prompted, select an administrator account to provide credentials for approval. ...
6. Start Repair will now start "Diagnosing your PC", and attempt to automatically repair it.

More items...

How to fix Startup Repair?

Remove apps from the startup folder

• Press the Win + R keys to open the Run dialogue.
• Type the below command and press Enter. shell:startup
• Inside the Startup folder, right-click on the problematic program.
• Select the Delete option.
• Close the folder.
• Restart for the changes to take effect and check if this fixes the issue or not.

How to start automatic repair Windows 10?

Enable or Disable Automatic Repair in Command Prompt at Boot. 1 Open a command prompt at boot. 2 Type bcdedit into the command prompt at boot, and press Enter. (see screenshot below) A) Look under the Windows Boot Loader section for your Windows 10 (description), and make note of its identifier (ex: " {default}").

How to fix automatic repair loop in Windows 10?

Scenario 1: You See A Black Screen with "Preparing Automatic Repair" Loop Message

• Method 1: Use Command Prompt to Erase Problematic Files. Deleting the problematic file from the system files helps in restoring the computer to working condition.
• Method 2: Disable Automatic Startup Repair. You can disable the automatic startup using the command prompt. ...
• Method 3: Restore Windows Registry. ...
• Method 4: Refresh or Reset Your PC. ...

How do I stop the startup repair loop?

Fix #2: Disable Automatic RestartRestart your computer.Wait for your BIOS to complete POST (the screen with your manufacturer logo and/or system information)Quickly begin tapping F8 repeatedly, until you see the list of boot options.Choose “Disable automatic restart on system failure”More items...

What causes startup repair loop?

Boot sector viruses and other malware that targets the bootloader or the booting chain can cause errors in the bootloader settings and state that result in an infinite loop of Startup Repair. The virus may then block Startup Repair from either launching or carrying out its repairs successfully.

How do you fix an endless repair loop?

Navigate to “Troubleshoot” > “Advanced Options” > “System Restore” Choose the restore point created right before the blue screen appeared (Windows 10 creates a system restore point each time it installs an update, driver, or app) Click "Next"

How do I fix a stuck startup repair?

2 Solutions to startup repair stuckMethod 1: Run chkdsk on the boot volume.Method 2: Disable Automatic Restart.Method 1. Run the sfc /scannow command (System File Checker) to repair file system.Method 2: Manually attempt to rebuild the BCD.Method 3: Fix Windows files manually.

How do I boot up in safe mode?

Press your phone's power button. When the animation starts, press and hold your phone's volume down button. Keep holding it until the animation ends and your phone starts in safe mode. You'll see "Safe mode" at the bottom of your screen.

What happens when Startup Repair doesn't work?

If you cannot use Startup Repair, then your option is to disable automatic restart, run chkdsk and rebuild bcd settings.

How do I fix a diagnosing loop in Windows 10?

If your Windows computer is stuck on the “Diagnosing Your PC” screen, turn it off three times in a row and then rerun Automatic repair. If the problem persists, enter Advanced troubleshooting, and uninstall the problematic update. As a last resort, reinstall the OS using an external bootable USB recovery drive.

How long should Windows attempting repairs?

2. Click Startup Repair. Windows will take anywhere from a few seconds to a few minutes to attempt to fix the problem. (It may not be able to.)

How to fix automatic repair loop?

Often booting into Safe Mode and uninstall recently install device drivers or software may fix the Automatic Repair loop error. To boot into Safe Mode of a Windows 7, 8, 8.1, or 10 system, you need to have the original DVD or USB. If you do not have the installation disc, follow the guide from Microsoft to create a Windows Installation Media. Then enter Safe Mode:

How to fix a file system error?

To fix file system error or disk error: Step 1:  DOWNLOAD EaseUS Tools M for Free and install it. Step 2: Open the software and select the "File showing" option. Step 3: Choose the drive and wait for repairing. After the operation completes, click the "View" button to check the drive.

How to boot Windows 7 from a bootable device?

(If you cannot boot, use Window 7 installation CD.) Step 2. Navigate to the "Repair your computer" option and select "Command Prompt". Step 3. In the Command Prompt window, type chkdsk /r c: and press "Enter". (c represents the drive where Windows is installed) Step 4.

How to scan a file that you lost?

Launch EaseUS Data Recovery Wizard, hover on the location where you lost data, then click "Scan".

Why is my PC black screen on reboot?

Unexpected PC shutdown, virus, malware, driver issues, damaged BDC settings, corrupted boot partition, blue screen of death as well as a black screen of death on reboot, all those factors account for Windows startup problems.

What happens if your device partition is not correct?

Sometimes, if your device partition values aren’t correct, you will get stuck in the startup repair loop. Follow the steps below to check the device partition and os device partition and fix your error.

How to boot into safe mode on Windows 7?

Then enter Safe Mode: Step 1. Insert the disc and reboot the system.

What Causes a Windows 10 Automatic Repair Loop?

There isn’t a single cause for a Windows 10 automatic repair loop, but there are several situations that are likely to cause it. Missing or corrupted system files are one of the more common causes, where Windows can’t boot (or repair itself) because these essential files it needs to run aren’t available.

Why is my Windows 10 auto repair looping?

If you recently installed new hardware before a Windows 10 automatic repair loop began to appear, then the hardware you’ve installed is a likely cause of the problem.

How to get Windows to boot into safe mode?

Once Windows boots up in Safe Mode, right-click the Start menu and select Windows PowerShell (Admin). In the PowerShell window, type DISM /Online /Cleanup-Image /RestoreHealth and allow the process to complete, which could take some time.

How to boot to a minimal version of Windows?

In the Troubleshoot menu, select the Advanced options option. Select Command Prompt in the Advanced options menu to boot to a minimal version of Windows, showing only a command prompt window.

How to check system drive for errors?

In the command prompt window, type chkdsk /r c: to begin a low-level check of your system drive for errors using the Check Disk utility. If it detects errors, chkdsk will automatically repair them (if possible).

How to restore health in PowerShell?

In the PowerShell window, type DISM /Online /Cleanup-Image / RestoreHealth and allow the process to complete, which could take some time.

How to force Windows to boot to command prompt?

To do this, restart your PC and press the F8 key on your keyboard before the Windows logo and spinning icon appears ( you may need to repeat this step a few times).

Why does the infinite loop of startup repair occur?

If the boot sector is infected by viruses and other malware, the bootloader and booting chain will get damaged. And the virus may then prevent Startup Repair from either running or implementing its repair normally. So the infinite loop of Startup Repair occurs.

Where is the disable automatic restart on system failure?

The “disable automatic restart on system failure” option can be seen in the Advanced Boot Options window. Here is how to trigger this action.

What happens when you write to a boot partition?

If any improper shutdown, sudden power failure, or a blue screen of death happens when you are writing to the boot partition, there is also a chance that your system is unable to boot and infinitely cycle into the Startup Repair.

How to roll back Windows 7 update?

1. Access the Safe Mode by pressing the F8 key while the system is booting up.

How to run chkdsk?

To run chkdsk, please do as follow: 1. Insert your Windows 7 installation disc into the CD drive, and boot Windows from the disk. 2. Press any key when you see “Press any key to boot from CD or DVD.”.

How to check if Windows 7 is in safe mode?

Once you have booted into Safe Mode, you will see an environment that’s similar to the usual Windows 7 desktop. Now you can search for “Programs and Features” under the Start Menu. Then click on “View installed updates ”.

How to restore Windows 7 to earlier state?

To access System Restore, follow the same steps in the third method to reach the System Recovery Options screen, click on "System Restore" and follow the instruction to finish the operation.

How to fix a computer that is stuck in repair loop?

Sometimes, your PC gets stuck at automatic repair loop or is attempting repair forever because Windows thinks that there is a problem with your PC while there is not, so you may just restart the PC. Step 1. Restart the PC and keep pressing F8 to get it into Windows Boot Manager. Step 2.

How to get out of auto repair loop?

Perform Command Prompt. If you see "your PC did not start correctly", you can go into Boot Options menu and use Command Prompt to get out of automatic repair loop. Step 1. Click Advanced Options; Choose Troubleshoot > Advanced Options > Command Prompt;

What Is Automatic Repair Loop and Why Does It Happen?

The tool is designed to launch automatically when a start-up problem comes up on Windows system.

Why does my computer go into auto repair?

Normally, by running Automatic Repair, Windows diagnoses the start-up problem (missing or corrupt system files, drivers, registry settings, etc.), fix it and then restart the PC automatically. But when Windows didn't shut down properly, it gets into automatic repair loop. For example, if your PC powered off improperly because of a power outage, system crash, data in the registry could be incomplete and corrupt, which lead to the automatic repair loop.

What to do if bootrec.exe doesn't fix auto repair loop?

If the bootrec.exe command doesn't fix the automatic repair loop, some suggest that you should run chkdsk commands as well.

Why won't my computer repair?

When Windows shows "Windows Automatic Repair couldn't repair your PC", it could indicate a corrupted registry on your computer. Therefore, you can get your Windows out of automatic repair loop by restoring the registry from RegBack directory.

Is vsock.sys corrupted?

Note: It is not always vsock.sys that is corrupted. In your case, it may show other files that are corrupted. So if you get other results rather than vsock.sys, check if the file is core system file; if it is, you are not supposed to delete the file.

Why is my automatic repair failing?

There could be many reasons for a failed automatic repair. However, the most common problem is corrupted registry or missing files on the hard disk. Here I will give the complete solutions on how to fix this issue in Windows 10, 8 and 7.

What is a fixmbr switch?

The /fixmbr switch writes a new MBR (Master Boot Record) to the system partition, the /fixboot switch writes a new boot sector onto the system partition, and the /rebuildbcd switch scans all disks for Windows installations and provides a choice of which entries to add to the BCD store.

Is my device really stuck on automatic repair loop?

There are a couple of tell-tale signs that you can use to tell whether your device is indeed stuck on the automatic repair loop. The error often occurs after making a Windows update or when your device shuts down unexpectedly.

What causes the Windows 11 automatic repair loop to occur?

There are a couple of reasons why the Windows 11 automatic repair loop occurs. The main one is because the operating system is unable to boot. This applies to Windows 10 users who are stuck on automatic repair loop too.

3. Boot your device in Safe Mode

Click on Troubleshoot, then select the Advanced options, and click on Startup Settings on your Windows 11 PC.

4. Reset your device

Use the Troubleshoot menu, and select Reset your PC displayed from the available options.

5. Run the Windows Startup Repair

Navigate to the Advanced option from the blue screen and press the Enter key.

6. Restore Windows Registry

Open the Command Prompt and key in the following command, then press Enter:

8. Hard Reboot Windows

Press and hold the computer’s Power button for a couple of seconds; your device will go off automatically.

How to fix Windows 10 auto repair loop?

1. Use the installation media, whether a DVD or USB drive, and connect to the system. 2. From the options, select boot from the installation media. 3. Wait till the files are copied. 4. From the setup screen, click "Next " to fix Windows 10 automatic repair loop. 5.

What to do if Windows 10 preparing automatic repair loop persists even after the above methods?

If windows 10 preparing automatic repair loop persists even after the above methods, you must refresh or reset your PC. The steps include the following:

How to set bcdedit to current?

Follow the steps below to proceed: 1. Search command prompt in the search window and open the application as an administrator. 2. In the command prompt screen, enter the following command and hit the "Enter" key: " bcdedit /set {current} recoveryenabled No ". 3.

How to fix boot loop of death?

The steps include: 1. Right-click on the Windows symbol at the bottom and select "Command Prompt (Admin)" from the list. 2.

What is Windows startup repair tool?

The Windows Startup Repair tool is an excellent feature to fix problems that are preventing the PC from starting in the normal mode. Although it may not resolve issues related to hardware, it is an excellent place to begin the troubleshooting procedure. The steps include:

Can you restore the registry?

Restoring the Windows registry could solve most of the problems, including the automatic repair loop. You can utilize the command prompt window to perform the task. The steps are as follows: