How to Fix a Windows 10 Automatic Repair Loop
- Disconnect or Remove Recently Installed or Connected Devices
- Run System Repair Tools (Chkdsk, SFC)
- Run the Windows 10 DISM tool
- Disable Automatic Startup Repair to Limit Boot Loops
How to run Windows 10 Startup Repair?
The Tutorial to Launch Startup Repair in Windows 10
- Boot to Advanced Startup Options.
- Click/tap on Troubleshoot.
- Click/tap on Advanced options.
- Click/tap on Startup Repair.
- If prompted, select an administrator account to provide credentials for approval. ...
- Start Repair will now start "Diagnosing your PC", and attempt to automatically repair it.
How to fix Windows 10 startup problem?
Windows 10 and 11 offer other methods for booting into Safe Mode. In Windows 10, go to Settings > Update & security > Recovery. In the Advanced Startup section, click the button for Restart now. In Windows 11, go to Settings > System > Recovery. In the Advanced Startup section, click the button for Restart now.
How to fix automatic repair loop in Windows 10?
Scenario 1: You See A Black Screen with "Preparing Automatic Repair" Loop Message
- Method 1: Use Command Prompt to Erase Problematic Files. Deleting the problematic file from the system files helps in restoring the computer to working condition.
- Method 2: Disable Automatic Startup Repair. You can disable the automatic startup using the command prompt. ...
- Method 3: Restore Windows Registry. ...
- Method 4: Refresh or Reset Your PC. ...
How to fix Windows 10 not booting?
Windows 10 Not Booting After Update
- Revert Installed Updates. Wait patiently for the Windows 10 booting procedure to begin after turning on your machine. ...
- Recover Using Startup Repair. Windows 10 will not start can be fixed by running automatic startup repair in the recovery environment.
- Boot in Safe Mode. ...
- Checking For Errors Using Command Prompt. ...
- Check Errors in Hard Drive. ...
How do I fix the repair loop in Windows 10?
But, there is no need to worry as our solutions will work for most causes of a Windows 10 automatic repair loop.Run Fixboot and Chkdsk Commands. ... Perform a System Scan in Safe Mode. ... Restore the Windows Registry. ... Disable the Automatic Repair Tool. ... Disable Early Launch Anti-Malware. ... Reset Your Windows 10 Device.
How do I fix Windows startup loop?
With Windows 10 stuck in the reboot loop, all you need to do is insert the installation media. Alternatively, access the UEFI/BIOS (tap Del, F8, or F1 when the system boots) and find the boot manager. Select the recovery partition as the primary device, then restart the computer.
What causes automatic repair loop Windows 10?
A bad system update, a new graphics card, corrupted system files, even a fresh USB mouse—any of these can cause a dreaded Windows 10 automatic repair loop to occur when you're trying to boot up a Windows PC.
How do I fix attempting repair loop?
0:007:38Windows 10 Automatic Repair Attempting Repairs Loop FIX [2022 ...YouTubeStart of suggested clipEnd of suggested clipHow to fix attempting repairs loop in windows. 10 first start your pc and press your f9 keyMoreHow to fix attempting repairs loop in windows. 10 first start your pc and press your f9 key repeatedly to access the automatic repair screen if your f9 key doesn't work try your other f keys like f8
What causes startup repair loop?
Boot sector viruses and other malware that targets the bootloader or the booting chain can cause errors in the bootloader settings and state that result in an infinite loop of Startup Repair. The virus may then block Startup Repair from either launching or carrying out its repairs successfully.
How do I fix startup repair?
First, power the computer completely down. Next, turn it on and keep pressing the F8 key as it boots. You'll see the Advanced Boot Options screen, which is where you would launch Safe Mode from. Select “Repair Your Computer” and run startup repair.
What happens when Windows 10 Startup Repair Fails?
If you are unable to perform a startup repair, then your next option is to try using your Windows 10 installation media to fix the boot error. If you don't have installation media, you will need to go to a working computer and Create a Windows 10 USB Bootable Flash Drive.
How do you fix the automatic repair loop 2022?
0:564:18【2022】How to Fix Automatic Repair Loop in Windows 10/11? - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf it detects errors it will automatically repair them while windows can't boot you can still forceMoreIf it detects errors it will automatically repair them while windows can't boot you can still force windows to boot to a command prompt window using the advanced. Options menu.
How long should Windows 10 attempting repairs take?
2. Click Startup Repair. Windows will take anywhere from a few seconds to a few minutes to attempt to fix the problem. (It may not be able to.)
Can't boot Win 10 Safe Mode?
4 Fixes to Try if Windows Won't Boot Into Safe ModeUse DISM and SFC to Repair System Files. If you have tried fixing a startup error before, you have probably used the Deployment Image Servicing and Management (DISM) tool. ... Use the Windows Startup Repair Tool. ... Clear the CMOS. ... Reset Your Computer.
How do I boot up in safe mode?
Press your phone's power button. When the animation starts, press and hold your phone's volume down button. Keep holding it until the animation ends and your phone starts in safe mode. You'll see "Safe mode" at the bottom of your screen.
What does boot looping mean?
A reboot loop (or boot loop) occurs when a Windows device unexpectedly restarts at some point during its otherwise normal startup process.
How do I fix boot loop without losing data?
Here's the guide:Turning off the phone, press Volume down and Power keys simultaneously for a few seconds to enter Custom Recovery mode.Choose Advanced option in the Custom Recovery menu.Select "Wipe Delvik Cache". ... Go to "Mounts and Storage" and select "format/cache" option. ... Reboot your device.
What Causes a Windows 10 Automatic Repair Loop?
There isn’t a single cause for a Windows 10 automatic repair loop, but there are several situations that are likely to cause it. Missing or corrupted system files are one of the more common causes, where Windows can’t boot (or repair itself) because these essential files it needs to run aren’t available.
Why is my Windows 10 auto repair looping?
If you recently installed new hardware before a Windows 10 automatic repair loop began to appear, then the hardware you’ve installed is a likely cause of the problem.
How to get Windows to boot into safe mode?
Once Windows boots up in Safe Mode, right-click the Start menu and select Windows PowerShell (Admin). In the PowerShell window, type DISM /Online /Cleanup-Image /RestoreHealth and allow the process to complete, which could take some time.
How to boot to a minimal version of Windows?
In the Troubleshoot menu, select the Advanced options option. Select Command Prompt in the Advanced options menu to boot to a minimal version of Windows, showing only a command prompt window.
How to open command prompt in Windows 10?
In the boot troubleshoot menu, select Troubleshoot > Advanced options > Command Prompt, then wait for the command line window to open. You may need to authenticate with your local or Microsoft account password first.
How to check system drive for errors?
In the command prompt window, type chkdsk /r c: to begin a low-level check of your system drive for errors using the Check Disk utility. If it detects errors, chkdsk will automatically repair them (if possible).
How to restore health in PowerShell?
In the PowerShell window, type DISM /Online /Cleanup-Image / RestoreHealth and allow the process to complete, which could take some time.
How to fix a computer that is stuck in repair loop?
Sometimes, your PC gets stuck at automatic repair loop or is attempting repair forever because Windows thinks that there is a problem with your PC while there is not, so you may just restart the PC. Step 1. Restart the PC and keep pressing F8 to get it into Windows Boot Manager. Step 2.
What to do if bootrec.exe doesn't fix auto repair loop?
If the bootrec.exe command doesn't fix the automatic repair loop, some suggest that you should run chkdsk commands as well.
What Is Automatic Repair Loop and Why Does It Happen?
The tool is designed to launch automatically when a start-up problem comes up on Windows system.
How to get out of auto repair loop?
Perform Command Prompt. If you see "your PC did not start correctly", you can go into Boot Options menu and use Command Prompt to get out of automatic repair loop. Step 1. Click Advanced Options; Choose Troubleshoot > Advanced Options > Command Prompt;
Why does my computer go into auto repair?
Normally, by running Automatic Repair, Windows diagnoses the start-up problem (missing or corrupt system files, drivers, registry settings, etc.), fix it and then restart the PC automatically. But when Windows didn't shut down properly, it gets into automatic repair loop. For example, if your PC powered off improperly because of a power outage, system crash, data in the registry could be incomplete and corrupt, which lead to the automatic repair loop.
Why won't my computer repair?
When Windows shows "Windows Automatic Repair couldn't repair your PC", it could indicate a corrupted registry on your computer. Therefore, you can get your Windows out of automatic repair loop by restoring the registry from RegBack directory.
Is vsock.sys corrupted?
Note: It is not always vsock.sys that is corrupted. In your case, it may show other files that are corrupted. So if you get other results rather than vsock.sys, check if the file is core system file; if it is, you are not supposed to delete the file.
What happens if you create a restore point before the automatic repair loop occurs?
If you have created a Windows restore point before the Automatic Repair loop occurs, you can perform a system restore to cope with the issue.
What is the solution to an endless 'Preparing Automatic Repair' loop?
The official Microsoft solution to an endless 'Preparing Automatic Repair' loop is to refresh or reset the PC directly.
How to make a bootable disk with easeus partition master?
To create a bootable disk of EaseUS Partition Master, you should prepare a storage media, like a USB drive, flash drive or a CD/DVD disc. Then, correctly connect the drive to your computer. Step 2. Launch EaseUS Partition Master, find the "WinPE Creator" feature on the top.
How to create a bootable disk on Windows 10?
Connect the USB drive to PC, launch EaseUS Data Recovery Wizard WinPE Edition. Select the USB drive and click "Create" to create a bootable disk.
What is the best tool to extend the system partition?
To make more free space for the system and applications, professional partition tool - EaseUS Partition Master can extend the system partition from a bootable disk and rescue the computer from a blue screen of Automatic Repair error:
How to change boot sequence in BIOS?
For most users, it works well when they restart their computer and press F2 at the same time to enter BIOS. Set to boot the PC from "Removable Devices" (bootable USB disk) or "CD-ROM Drive" (bootable CD/DVD) beyond Hard Drive. Press "F10" to save and exit.
What is the best recovery software for Windows 11?
EaseUS Data Recovery Wizard is the best data recovery software for Windows 11. Use it to retrieve deleted, lost, formatted, corrupted data quickly.
What to do if media won't boot?
If the media won't boot you may need to enter BIOS/UEFI Setup (pressing key given in chart in link above) to turn off Fast Boot or Fast Startup first.
Can I reinstall Windows 10 at any time?
Independent Advisor. Replied on June 14, 2019. Hi Avalon, because all repair options, including both Reset options are failing, your best option is to clean install Windows 10, which will also repair your recovery image . . You can reinstall Windows 10 at any time and it will not cost you anything !
How to fix automatic repair loop?
Often booting into Safe Mode and uninstall recently install device drivers or software may fix the Automatic Repair loop error. To boot into Safe Mode of a Windows 7, 8, 8.1, or 10 system, you need to have the original DVD or USB. If you do not have the installation disc, follow the guide from Microsoft to create a Windows Installation Media. Then enter Safe Mode:
How to fix a file system error?
To fix file system error or disk error: Step 1: DOWNLOAD EaseUS Tools M for Free and install it. Step 2: Open the software and select the "File showing" option. Step 3: Choose the drive and wait for repairing. After the operation completes, click the "View" button to check the drive.
How to boot Windows 7 from a bootable device?
(If you cannot boot, use Window 7 installation CD.) Step 2. Navigate to the "Repair your computer" option and select "Command Prompt". Step 3. In the Command Prompt window, type chkdsk /r c: and press "Enter". (c represents the drive where Windows is installed) Step 4.
How to scan a file that you lost?
Launch EaseUS Data Recovery Wizard, hover on the location where you lost data, then click "Scan".
Why is my PC black screen on reboot?
Unexpected PC shutdown, virus, malware, driver issues, damaged BDC settings, corrupted boot partition, blue screen of death as well as a black screen of death on reboot, all those factors account for Windows startup problems.
What happens if your device partition is not correct?
Sometimes, if your device partition values aren’t correct, you will get stuck in the startup repair loop. Follow the steps below to check the device partition and os device partition and fix your error.
How to boot into safe mode on Windows 7?
Then enter Safe Mode: Step 1. Insert the disc and reboot the system.
How to repair Windows 10?
When you see the Windows 10 install window, select a language, a time, a currency, a keyboard or another input method, and then click "Next". Step 4. Click Repair your computer. Step 5. Select the operating system that you want to repair, and then you will be lead to Troubleshoot. Step 6.
Why is my computer stuck in restart loop?
There are reports that Windows 10 conflicts with AMD graphics. If your Windows 10 stuck in restart loop, that might be caused by the outdated driver issues. Just have a try fixing the graphics drivers. You can use a professional driver utility for checking and fixing driver problems.
How to fix a computer that won't turn on?
Workaround #1: Disable Automatic Restart. Step 1. While restarting your computer continuously press F8 until you get Windows logo on screen. Step 2. Once the boot menu appears on screen, release F8 and select Safe Mode. Step 3. When Windows boot into Safe Mode, go to Search box and type " sysdm.cpl ".
How to make a bootable USB drive?
Step 1. Insert the Windows installation disc or connect the USB media to your PC and then start the computer. Step 2.
How to backup registry key?
Tip: It is better for you to back up your registry key, avoiding any kind of disaster. To back up, go to " File " and click on " Export… " Assign a name to the backup and save it to a safe location.
What to do if there are multiple bad sectors on a drive?
If there are multiple bad sectors on the drive, you should start a disk backup (check Workaround #7) before data loss occurs and install Windows 10 on a new drive. But if no bad sectors are found and Windows 10 reboot loop persists, contact Microsoft for technician help.
How to turn off a computer when it is spinning?
Step 1. Power off the PC and then power it on. As soon as you see the rotating loading circle, press and hold the Power button to shut it off.
How to fix auto repair loop?
8 Solutions - Fix Preparing Automatic Repair Loop Windows 10 1 Remove the battery and AC adapter. 2 Press and hold the power button for 20 seconds and see if it will boot up normally.
How to fix a computer that won't boot?
If your Windows cannot boot because of the "Preparing Automatic Repair" or "Diagnosing your PC" error, you can do a hard reboot. Remove the battery and AC adapter. Press and hold the power button for 20 seconds and see if it will boot up normally.
How to make a bootable CD?
Step 1. Create bootable CD/DVD discs or USB flash drive by using MiniTool Bootable Media Builder.Install your MiniTool Power Data Recovery Personal Deluxe in a normal computer, and then click Bootable Media in the lower part of the main interface.
How to re-build a boot record?
Step 1. Insert the Windows bootable installation disk into your PC that has "Preparing Automatic Repair" or "Diagnosing your PC" error message. Step 2. Boot your PC from the installation disk. Step 3.
What is automatic repair?
Automatic Repair is a feature introduced in Windows 10/8 that can fix some PC issues when the computer cannot boot properly.
How to install Windows 10 on a Windows 10 laptop?
Step 1: Turn off your computer. Step 2: Insert the Windows bootable installation disk to your PC and boot from it. Step 3: When prompted to Press any key to boot from CD or DVD, press any key to continue. Step 4: Select your language preferences in the Windows Setup interface, and click on Next button to continue.
Does MiniTool Bootable Media Builder work with USB?
Note: MiniTool Bootable Media Builder will format the USB flash drive or CD/DVD discs while building MiniTool Bootable Disc. Please make sure to back up all important data on the USB drive or CD/DVD disc before burning.
Is my device really stuck on automatic repair loop?
There are a couple of tell-tale signs that you can use to tell whether your device is indeed stuck on the automatic repair loop. The error often occurs after making a Windows update or when your device shuts down unexpectedly.
What causes the Windows 11 automatic repair loop to occur?
There are a couple of reasons why the Windows 11 automatic repair loop occurs. The main one is because the operating system is unable to boot. This applies to Windows 10 users who are stuck on automatic repair loop too.
3. Boot your device in Safe Mode
Click on Troubleshoot, then select the Advanced options, and click on Startup Settings on your Windows 11 PC.
4. Reset your device
Use the Troubleshoot menu, and select Reset your PC displayed from the available options.
5. Run the Windows Startup Repair
Navigate to the Advanced option from the blue screen and press the Enter key.
6. Restore Windows Registry
Open the Command Prompt and key in the following command, then press Enter:
8. Hard Reboot Windows
Press and hold the computer’s Power button for a couple of seconds; your device will go off automatically.
