[Solution] Fix Startup Loop in Windows 7
- Disable Automatic Restart.
- Run chkdsk on the boot volume.
- Manually attempt to rebuild the BCD.
- Perform system restore.
Full Answer
How to perform Startup Repair in Windows 7?
Method 1 of 2: Using the System Recovery Options
- Remove all external drives, CDs, and/or DVDs from your PC. ...
- Press and hold the Power button to turn off your PC. You can lift your finger once the PC is off.
- Press and hold F8 as you turn on the PC. ...
- Select Repair your computer and press ↵ Enter. ...
- Select a language and click Next. ...
- Click Startup Repair. ...
- Click Finish to repair and restart your PC. ...
How to fix Windows 7 Startup Repair?
Solution 2: Run chkdsk on the boot volume
- Insert the Windows 7 installation disc and boot your computer from it.
- Press any key when you see “Press any key to boot from CD or DVD.”
- Choose Repair your computer > select your OS from the list when the Startup Repair finishes scanning your PC.
- Select Command Prompt from System Recovery Options window.
How to repair Windows 7 boot problems using Startup Repair?
While in the Advanced startup environment, use the following steps to use Startup Repair:
- Click the Troubleshoot button.
- Click the Advanced options button.
- Click the Startup Repair button.
- Select your account.
- Type your account password.
- Click the Continue button. Quick Tip: If your computer is loading correctly, using this tool, you'll get the "Start Repair couldn't repair your PC" message because there's nothing that needs ...
How to solve startup problem in Windows 7?
Windows 7 startup issues troubleshooting- how to do
- Method 1: Removing recently attached devices or external hardware. ...
- Method 2: Using Safe Mode. ...
- Method 3: Run msconfig. ...
- Method 4: Running CHKDSK and SFC command prompt. ...
- Method 5: Using Last Known Good Configuration. ...
- Method 6: Manually run startup repair. ...
- Method 7: Using System Restore in Safe Mode. ...
How do I fix the startup repair loop in Windows 7?
Table of ContentsMethod 1. Rollback to the recent Windows 7 update.Method 2. Disable Automatic Restart.Method 3. Run chkdsk on the boot volume.Method 4. Run bootrec to fix damaged or corrupted BCD settings.Method 5. Perform a System Restore.Method 6. Rebuild MBR without installation disc.
How do I get rid of startup repair loop?
Fix #2: Disable Automatic RestartRestart your computer.Wait for your BIOS to complete POST (the screen with your manufacturer logo and/or system information)Quickly begin tapping F8 repeatedly, until you see the list of boot options.Choose “Disable automatic restart on system failure”More items...
What causes startup repair loop?
Boot sector viruses and other malware that targets the bootloader or the booting chain can cause errors in the bootloader settings and state that result in an infinite loop of Startup Repair. The virus may then block Startup Repair from either launching or carrying out its repairs successfully.
How do you fix an infinite repair loop?
1:527:27How to Fix Automatic Repair Loop in Windows 10 - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply use this restart option to try to boot your PC back to Windows. But if that fails or if youMoreSimply use this restart option to try to boot your PC back to Windows. But if that fails or if you keep getting such errors over and over again then you can proceed with your the solutions in the
Can Windows 7 repair itself?
If you've found yourself frustrated after investing time and money into fixing your machine, you might be surprised to learn that Windows can fix itself. Every Windows operating system has the ability to repair its own software, with apps for the task bundled in every version since Windows XP.
How long should Startup Repair take Windows 7?
Startup Repair in Windows 7 should take between 15 and 45 minutes. If it takes longer, something is wrong. Why does it take so long? It could be for two reasons: it is either stuck or your Windows simply can't fix the problem.
What do I do if Windows Startup Repair doesn't work?
If you cannot use Startup Repair, then your option is to disable automatic restart, run chkdsk and rebuild bcd settings....Type following command lines and press Enter after each to fix Startup Repair stuck issue:bootrec /fixmbr.bootrec /fixboot.bootrec /rebuildbcd.
How do I repair Windows 7 without a disk?
1:0210:28How To Repair Windows 7 And Fix Corrupt Files Without CD ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo as your computer is starting off you want to tap the f8 key repeatedly. On your keyboard. AndMoreSo as your computer is starting off you want to tap the f8 key repeatedly. On your keyboard. And then as you're tapping FAQ you just want to tap it repeatedly.
How do I fix the repair loop in Windows 10?
But, there is no need to worry as our solutions will work for most causes of a Windows 10 automatic repair loop.Run Fixboot and Chkdsk Commands. ... Perform a System Scan in Safe Mode. ... Restore the Windows Registry. ... Disable the Automatic Repair Tool. ... Disable Early Launch Anti-Malware. ... Reset Your Windows 10 Device.
How do I bypass a repairing disk error?
What to Do on Stuck “Repairing disk errors” Issue in Windows 10?Let It Finish Overnight. First of all, “Repairing disk errors” is triggered by automatic CHKDSK on booting. ... Restart from Safe Mode. It is known that safe mode can solve myriad problems in computer. ... Automatic Repair. ... System Restore. ... Replace Drive.
How to fix Windows 7 startup repair loop?
Another method to fix the Windows 7 Startup Repair loop problem is to check the boot volume and fix errors. If your drive has filesystem corruption, it may lead to system failure. You need a command prompt to run chkdsk command.
How to fix Startup Repair infinite loop in Windows 7?
If you no longer have the installation media, a system repair disc can also help you make it. You can scroll down to access the tutorial to learn how to create system repair disc.
How to fix boot failure?
1. Boot your computer from Windows system repair disc and then bring up a commad prompt as you do in the second method. 2. Then you can type the following command to rebuild master boot record (MBR), partition bootsectors, and boot configuration data (BCD) to the startup issue. bootrec /fixmbr.
What is it called when Windows 7 runs into startup repair?
Windows 7 boot again and again into Startup Repair without loading the normal Windows 7. This is called Startup Repair loop.
How to install Windows 7 on a Windows 7 laptop?
Insert the Windows 7 installation disc and boot your computer from it. 2. Press any key when you see “Press any key to boot from CD or DVD.”. 3. Choose Repair your computer > select your OS from the list when the Startup Repair finishes scanning your PC. 4.
How to restore Windows 7 to working state?
1. Enter the System Recovery Options screen from system repair disc or installation disc. Just like the same steps in the second method. 2.
Why are my restore points invalid?
System restore points are stored in the corresponding volume, so the restore points become invalid if the volume corrupts.
How to repair Windows 7?
When you reach a window that has an Install now button at its very center, click on Repair your computer in the bottom left of the window. Select the Operating System you want to repair. If Windows 7 is your only Operating System, only it will be displayed in the list. At the System Recovery Options window, click on Startup Repair .
How to boot from the installation media?
As soon as the computer starts booting up, get into its BIOS settings (the instructions for which vary depending on the manufacturer of the computer’s motherboard) and configure the computer’s boot order to boot from the installation media instead of the hard drive. On most systems, it is the F2 key that needs to be pressed when the first screen appears. The key to enter bios is also displayed on the first screen that appears just for a few seconds. Save the changes once done and exit the BIOS settings.
How to make a backup folder in MD?
Type in MD mybackup and press Enter to make a backup folder, in case something goes wrong.
What tool to use to fix Windows 7 startup loop?
Or you can fix the issue that Windows 7 stuck in Startup Repair loop via a comprehensive and powerful tool, AOMEI Partition Assistant Standard. It allows you to rebuild MBR, check bad sector, or make surface test under WinPE environment.
What is a startup repair?
Startup Repair, one of the recovery tools in the System Recovery Options menu, can be used to scan your computer and fix issues, like damaged/corrupted files, when the PC faces the blue screen of death. However, you are likely to encounter Windows 7 Startup Repair loop as mentioned in Scenario. If you are in such a condition, try the following solutions to fix the issue.
How to make a bootable USB drive?
Step 1. Insert a USB drive to the working PC and run AOMEI Partition Assistant. In the main interface, choose “ Make Bootable Media ” and click “ Next ”. Note: All the data stored on the USB drive will be erased, thus you should back up the files that you don’t want to lose before this operation. Step 2.
How to stop automatic restart on system failure?
Restart your PC > Type F8 repeatedly when the screen with the manufacturer logo and/or system information appears > In the Advanced Boot Options window, choose “ Disable automatic restart on system failure ” > press Enter and wait for PC to boot.
Is Windows fresh install bad?
If so, Windows fresh install is not a bad choice. But it is time-wasting and energy-consuming. Thus, it is advised to perform a system restore if you have already created system backup. Free Partition Manager.
How to fix automatic repair loop?
Often booting into Safe Mode and uninstall recently install device drivers or software may fix the Automatic Repair loop error. To boot into Safe Mode of a Windows 7, 8, 8.1, or 10 system, you need to have the original DVD or USB. If you do not have the installation disc, follow the guide from Microsoft to create a Windows Installation Media. Then enter Safe Mode:
How to fix a file system error?
To fix file system error or disk error: Step 1: DOWNLOAD EaseUS Tools M for Free and install it. Step 2: Open the software and select the "File showing" option. Step 3: Choose the drive and wait for repairing. After the operation completes, click the "View" button to check the drive.
How to boot Windows 7 from a bootable device?
(If you cannot boot, use Window 7 installation CD.) Step 2. Navigate to the "Repair your computer" option and select "Command Prompt". Step 3. In the Command Prompt window, type chkdsk /r c: and press "Enter". (c represents the drive where Windows is installed) Step 4.
How to scan a file that you lost?
Launch EaseUS Data Recovery Wizard, hover on the location where you lost data, then click "Scan".
Why is my PC black screen on reboot?
Unexpected PC shutdown, virus, malware, driver issues, damaged BDC settings, corrupted boot partition, blue screen of death as well as a black screen of death on reboot, all those factors account for Windows startup problems.
What happens if your device partition is not correct?
Sometimes, if your device partition values aren’t correct, you will get stuck in the startup repair loop. Follow the steps below to check the device partition and os device partition and fix your error.
How to boot into safe mode on Windows 7?
Then enter Safe Mode: Step 1. Insert the disc and reboot the system.
What is Windows 7 startup repair?
Windows 7 Startup Repair stuck also can be called Startup Repair Windows 7 loop. This error prevents you from accessing anything on your computer and presents an endless loop of loading Startup Repair.
What is startup repair?
It can be used to scan your computer and fix missing or damaged system files that prevent Windows from starting correctly. When Windows 7 fails to boot properly, this tool can be used to scans your PC for issues like corrupt system files or an invalid boot file, then tries to fix the problem.
Why is my computer stuck on startup?
If you stuck on computer startup repair screen, the problem is probably caused by damaged or corrupted BCD settings or corrupted boot partition. Follow the following steps to solve this problem.
How to restore AOMEI backup?
Boot the computer from the bootable media and it will take you to the main interface of AOMEI Backupper. Click Restore and follow the instructions. It only takes you a few clicks. If you want to restore to a dissimilar hardware, tick Universal Restore. Here is the Restore interface.
What is the command line tool for repairing a corrupted drive?
The command line chkdsk tool can be used to check (and sometimes repair) your drives for file system corruption.
What to do if your computer is too severe?
If the problem is too severe that all the above-mentioned method cannot solve the problem, you can try to perform a system restore. System restore can always be a simple solution to fix for this issue.
Does Aomei backup work on Windows 7?
With AOMEI Backupper, you do not need to bother about Startup Repair in Windows 7 not working issue. This software also can be applied to Windows 8/8.1/10/Visa/XP.
What causes an infinite loop of startup repair?
Bootsector viruses and other malware that targets the bootloader or the booting chain can cause errors in the bootloader settings and state that result in an infinite loop of Startup Repair.
Why is my computer not booting up?
Problems booting up Windows can often be traced back to errors in the bootloader installation or configuration. Rebuilding your PC’s master boot record (MBR), partition bootsectors, and boot configuration data (BCD) can fix various problems with the BOOTMGR bootloader.
How to boot into safe mode on Windows 8?
If you don’t have it, go to Fix with Easy Recovery Essentials. Insert the disc and reboot the system. Press any key to boot from the DVD.
What causes a computer to not boot?
An unsafe shutdown, sudden power loss, hard disk failure, or a blue screen of death during writes to the boot partition can leave your system in an inconsistent state, unable to boot and infinitely cycling into the Startup Repair.
How to run bootrec.exe on Windows 8?
To run bootrec.exe on Windows 8 or 8.1, follow these steps: Insert the original Windows 8/8.1 install DVD or USB. If you don’t have the installation DVD or USB, go to Fix Automatic Repair Loop with Easy Recovery Essentials. Click Repair your computer . Click Troubleshoot and then Advanced options.
Does startup repair fail?
Startup Repair will then either fail to load, launch but fail to repair, or run and claim repairs have been executed — however your PC will continue to attempt to endlessly start Startup Repair each boot.
Does every other time Windows attempts to boot a BSOD occur?
It is possible that every other time Windows attempts to boot, a BSOD occurs.
