how to fix windows 7 startup repair offline

How to fix the "Offline Startup Repair" error

• Method 1: Reset BIOS Settings. ...
• Method 2: Connecting loops. ...
• Method 3: Restore startup. ...
• Method 4: "Command Prompt" If the above methods have not solved the problem, reboot the system from a flash drive or installation disc.
• Conclusion: So what to do about the offline startup repair problem? ...

Full Answer

How to fix Startup Repair loop on Windows 7?

How to fix Startup Repair infinite loop in Windows 7

• Solution 1: Disable Automatic Restart. The first thing you should try is to disable Automatic Restart to see if it can load Windows 7 successfully.
• Solution 2: Run chkdsk on the boot volume. ...
• Solution 3: Manually attempt to rebuild the BCD. ...
• Solution 4. ...

How to repair Windows 7 boot problems using Startup Repair?

While in the Advanced startup environment, use the following steps to use Startup Repair:

• Click the Troubleshoot button.
• Click the Advanced options button.
• Click the Startup Repair button.
• Select your account.
• Type your account password.
• Click the Continue button. Quick Tip: If your computer is loading correctly, using this tool, you'll get the "Start Repair couldn't repair your PC" message because there's nothing that needs ...

How to fix Windows 7 startup?

Way 6: The Best Solution for Windows 7 Stuck at Starting Windows Logo

• Launch the Windows Boot Genius on your computer. The mandatory component for further process is a bootable disk and thus you have to prepare it. ...
• Insert this CD in the system/computer having issue. ...
• Once the computer is booted from the USB/CD, the software interface will be displayed. ...

How to perform Startup Repair in Windows 7?

Method 1 of 2: Using the System Recovery Options

1. Remove all external drives, CDs, and/or DVDs from your PC. ...
2. Press and hold the Power button to turn off your PC. You can lift your finger once the PC is off.
3. Press and hold F8 as you turn on the PC. ...
4. Select Repair your computer and press ↵ Enter. ...
5. Select a language and click Next. ...
6. Click Startup Repair. ...
7. Click Finish to repair and restart your PC. ...

More items...

How do I fix Windows 7 startup repair failed?

First, power the computer completely down. Next, turn it on and keep pressing the F8 key as it boots. You'll see the Advanced Boot Options screen, which is where you would launch Safe Mode from. Select “Repair Your Computer” and run startup repair.

What do I do if Windows Startup Repair doesn't work?

If you cannot use Startup Repair, then your option is to disable automatic restart, run chkdsk and rebuild bcd settings....Type following command lines and press Enter after each to fix Startup Repair stuck issue:bootrec /fixmbr.bootrec /fixboot.bootrec /rebuildbcd.

How can I repair Windows 7 without CD?

Restore without installation CD/DVDTurn on the computer.Press and hold the F8 key.At the Advanced Boot Options screen, choose Safe Mode with Command Prompt.Press Enter.Log in as Administrator.When Command Prompt appears, type this command: rstrui.exe.Press Enter.More items...

How do I force a Windows 7 repair?

Press F8 before the Windows 7 logo appears. At the Advanced Boot Options menu, select the Repair your computer option. Press Enter. System Recovery Options should now be available.

Can Windows 7 repair itself?

If you've found yourself frustrated after investing time and money into fixing your machine, you might be surprised to learn that Windows can fix itself. Every Windows operating system has the ability to repair its own software, with apps for the task bundled in every version since Windows XP.

What is the command to repair Windows 7?

In the System Recovery Options dialog box, click Command Prompt to boot repair in Windows 7. 7. Type Bootrec.exe, and then press Enter.

How do I reinstall Windows 7 from BIOS?

0:217:45How to Install or Reinstall Windows 7 - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou will need to change the boot sequence in the BIOS I have a video tutorial that teaches you howMoreYou will need to change the boot sequence in the BIOS I have a video tutorial that teaches you how to change the boot sequence in the BIOS the link is in the description. Box below here.

Can I download a boot disk for Windows 7?

The Windows USB/DVD download tool is a free utility from Microsoft that will allow you to burn the Windows 7 download to disc or create a bootable USB drive.

How do I force Startup Repair?

Hold the Shift key down at the Windows sign-in screen and press the Power button at the same time.Continue holding the Shift key, then click Restart.Once the PC restarts, it'll present a screen with a few options. ... From here, click Advanced options.In the Advanced options menu, choose Startup Repair.More items...•

What happens when Windows 10 Startup Repair Fails?

If you are unable to perform a startup repair, then your next option is to try using your Windows 10 installation media to fix the boot error. If you don't have installation media, you will need to go to a working computer and Create a Windows 10 USB Bootable Flash Drive.

How long should a startup repair take?

Startup Repair in Windows 7 should take between 15 and 45 minutes. If it takes longer, something is wrong. Why does it take so long? It could be for two reasons: it is either stuck or your Windows simply can't fix the problem.

How do I repair corrupted Windows 10?

How can I fix corrupted files in Windows 10 & 11?Use the SFC tool. 1.1 Run System File Checker. ... Use the DISM tool. ... Run a SFC scan from Safe Mode. ... Perform a SFC scan before Windows 10 starts. ... Replace the files manually. ... Use the System Restore feature. ... Reset corrupted Windows 10.

How do I fix the repair loop in Windows 10?

Click on "Advanced options” in the automatic repair blue screen. Navigate to “Troubleshoot” > “Advanced Options” > “System Restore” Choose the restore point created right before the blue screen appeared (Windows 10 creates a system restore point each time it installs an update, driver, or app) Click "Next"

What to do if you can't start Windows 7?

NOTE: If you are unable to start your Windows 7 computer normally after installing new drivers or changing settings, you can try the "Last Known Good Configuration" option before trying Safe Mode. This can load the drivers and registry data that worked the last time you successfully started and then shut down Windows 7.

How to restore Windows 7 to earlier state?

To access System Restore, follow the same steps in the third method to reach the System Recovery Options screen, click on "System Restore" and follow the instruction to finish the operation.

Why does the infinite loop of startup repair occur?

If the boot sector is infected by viruses and other malware, the bootloader and booting chain will get damaged. And the virus may then prevent Startup Repair from either running or implementing its repair normally. So the infinite loop of Startup Repair occurs.

How to roll back Windows 7 update?

1. Access the Safe Mode by pressing the F8 key while the system is booting up.

How to run chkdsk?

To run chkdsk, please do as follow: 1. Insert your Windows 7 installation disc into the CD drive, and boot Windows from the disk. 2. Press any key when you see “Press any key to boot from CD or DVD.”.

How to check if Windows 7 is in safe mode?

Once you have booted into Safe Mode, you will see an environment that’s similar to the usual Windows 7 desktop. Now you can search for “Programs and Features” under the Start Menu. Then click on “View installed updates ”.

Where is the disable automatic restart on system failure?

The “disable automatic restart on system failure” option can be seen in the Advanced Boot Options window. Here is how to trigger this action.

What is Windows 7 startup repair?

Windows 7 Startup Repair stuck also can be called Startup Repair Windows 7 loop. This error prevents you from accessing anything on your computer and presents an endless loop of loading Startup Repair.

What is startup repair?

It can be used to scan your computer and fix missing or damaged system files that prevent Windows from starting correctly. When Windows 7 fails to boot properly, this tool can be used to scans your PC for issues like corrupt system files or an invalid boot file, then tries to fix the problem.

Why is my computer stuck on startup?

If you stuck on computer startup repair screen, the problem is probably caused by damaged or corrupted BCD settings or corrupted boot partition. Follow the following steps to solve this problem.

How to restore AOMEI backup?

Boot the computer from the bootable media and it will take you to the main interface of AOMEI Backupper. Click Restore and follow the instructions. It only takes you a few clicks. If you want to restore to a dissimilar hardware, tick Universal Restore. Here is the Restore interface.

What is the command line tool for repairing a corrupted drive?

The command line chkdsk tool can be used to check (and sometimes repair) your drives for file system corruption.

What to do if your computer is too severe?

If the problem is too severe that all the above-mentioned method cannot solve the problem, you can try to perform a system restore. System restore can always be a simple solution to fix for this issue.

Does Aomei backup work on Windows 7?

With AOMEI Backupper, you do not need to bother about Startup Repair in Windows 7 not working issue. This software also can be applied to Windows 8/8.1/10/Visa/XP.

What is Windows 7 startup repair?

Startup Repair is an easy diagnostic and repair tool to use when Windows 7 fails to start properly and you can't use Safe Mode.

Where is the repair button on my computer?

Click Repair your computer on the bottom-left of the Install Windows window.

What is System Recovery Options?

System Recovery Options, the set of tools that contains Startup Repair, will now search your hard drive (s) for any Windows 7 installations.

What are the recovery tools for Windows 7?

As you can see, several other diagnostic and recovery tools are available in the Windows 7 System Recovery Options including System Restore, System Image Recovery, Windows Memory Diagnostic, and Command Prompt .

How to boot Windows 7 from a DVD?

Press any key to force the computer to boot from the Windows 7 DVD. If you don't press a key, your PC will try to boot to the operating system that's currently installed on your hard drive. If this happens, just restart your computer and try to boot to the Windows 7 DVD again.

Is user intervention required for Windows 7?

No user intervention is required here. Just wait for the Windows 7 setup process to load files in preparation for whatever task you might want to complete.

Is Windows 7 still supported?

As of January 2020, Microsoft is no longer supporting Windows 7. We recommend upgrading to Windows 10 to continue receiving security updates and technical support. The Windows 7 repair tool is available from the Windows 7 DVD, so you must have a physical copy of the operating system in order for this to work.

What is Windows startup repair?

Windows Startup Repair is a great way to check and replace missing or damaged system files on your computer. This way, you can get rid of many problems that prevent the computer from booting properly. It's good when this utility works 100% of the time, but what do you do if you get the message "Startup Repair cannot restore this computer automatically"? The best suggestion that you study this article.

How to fix computer that says "Startup Repair cannot repair this computer automatically"?

1. Disconnect all devices. This is especially true when you have recently connected a device to your computer (camera, flash drive, etc.). If so, try removing this device, or better yet, all devices, and then restart your computer. This simple method often helps to get rid of the “Startup Repair cannot repair this computer automatically” message on ...

How to repair a computer?

Start booting the system and press F8 repeatedly. You will see the Additional Boot Options menu; choose "Repair your computer".

How to check system files?

Windows System File Checker checks the status of system files and fixes them if possible. Start booting the system and press "F8" repeatedly until you see the Windows logo.

Method 1: Reset BIOS Settings

Go to the BIOS (with the keys F2 o Share when starting the computer). Load default configuration (item "Load Optimized Defaults". ). Save the changes made (by pressing the key F10) and restart Windows.

Method 2: Connecting loops

It is necessary to check the integrity of the connectors and make sure that the hard disk drive and the trunnions of the motherboard are properly connected. Make sure all the pins are properly connected and tight. After the check, reboot the system and check the fault.

Method 3: Restore startup

Since normal booting of the operating system is not possible, it is recommended to use a boot disk or flash drive with an identical system to the one installed.

Method 4: "Command Prompt"

If the above methods have not solved the problem, reboot the system from a flash drive or installation disc.

Conclusion

So what to do about the offline startup repair problem? The easiest and most efficient way is to use bootable recovery of the operating system by applying a bootable disk or a flash drive. If the system restore method does not solve the problem, use the command line. Also check the integrity of all computer connections and BIOS settings.

What to do if your PC doesn't have a Windows installation disc?

If your PC did not come with a Windows installation disc or if you no longer have your Windows setup media, you can use Easy Recovery Essentials for Windows instead. EasyRE will automatically find and fix many problems, and can also be used to solve this problem with the directions below.

How to run chkdsk?

Here are the steps: Insert your Windows CD. Press any key when “Press any key to boot from CD or DVD” message appears. Select Repair your computer after you select the language, time and keyboard method. Select your Windows install drive, which is usually C:.

Can Easy Recovery Essentials fix a computer?

Easy Recovery Essentials is guaranteed to fix the “Startup repair cannot repair this computer automatically” error automatically using its built-in Automated Repair option. EasyRE is currently available for Windows XP, Vista, 7 and 8 and can be downloaded and created on any PC.

Why is Startup Repair not working?

However, why does Startup Repair not work? The main reasons conclude "a problematic device attached to your computer", "damaged file system of your system disk", "bad sectors on the boot drive", "the corrupted MBR of the hard drive", etc. Next, we will show you how to fix this error.

How to fix bootrec.exe?

If so, you can run bootrec commands to fix this issue. 1. Open Command Prompt following the instructions mentioned above. 2. Type “ Bootrec /RebuildBcd ”, and then press “ENTER”. If the Bootrec.exe tool runs successfully, it presents you with an installation path of a Windows directory.

How to fix a computer that won't turn on?

You could do the following things to fix this problem: 1. Press F8 button constantly while booting to go Setup menu, then select Safe Mode. 2. After enter OS, and then go Start ->All Programs ->Accessories ->System Tools ->System Restore, then use the system restore point to restore your computer back to normal.

Why is my computer not repairing my USB drive?

If you connected storage devices to your current computer, the computer might recognize the external hard drive like USB flash drive as the system boot partition, and Startup Repair tool check the USB drive instead of the actual boot partition on the disk. Thus, the “Startup Repair cannot repair this computer automatically” error occurred. So you can try to remove the device and restart the computer to check if this problem disappears. If it does not work, proceed to the next fix.

What to do if Windows isn't starting?

If Windows isn’t starting properly, you can often use the integrated “startup repair” tool to fix it . This recovery tool will scan your PC for problems like missing or damaged system files. It can’t fix hardware issues or Windows installation problems, but it’s a great first place to start if you’re experiencing trouble booting into Windows.

How to fix Windows 7 that won't boot?

If Windows 7 won’t boot properly and doesn’t show you the Error Recovery screen, you can get into it manually . First, power the computer completely down. Next, turn it on and keep pressing the F8 key as it boots.