- Method 1. Rollback to the recent Windows 7 update. If your Windows 7 is stuck into an infinite Startup Repair loop after an update, you can try to roll back ...
- Method 2. Disable Automatic Restart. The “disable automatic restart on system failure” option can be seen in the Advanced Boot Options window.
- Method 3. Run chkdsk on the boot volume. The command line chkdsk tool can be used to check, or even repair the drives to tackle file system corruption.
- Method 4. Run bootrec to fix damaged or corrupted BCD settings. If the bootloader installation or configuration comes with some errors, the Startup Repair loop could happen as well.
- Method 5. Perform a System Restore. Since System Protection is enabled by default, you can use it to restore your computer to an earlier state.
- Method 6. Rebuild MBR without installation disc. As you can see, most solutions require the use of the Windows setup CD or DVD. ...
- Restart your computer.
- Wait for your BIOS to complete POST (the screen with your manufacturer logo and/or system information)
- Quickly begin tapping F8 repeatedly, until you see the list of boot options.
- Choose “Disable automatic restart on system failure”
How to fix Windows 7 using Startup Repair?
While in the Advanced startup environment, use the following steps to use Startup Repair:
- Click the Troubleshoot button.
- Click the Advanced options button.
- Click the Startup Repair button.
- Select your account.
- Type your account password.
- Click the Continue button. Quick Tip: If your computer is loading correctly, using this tool, you'll get the "Start Repair couldn't repair your PC" message because there's nothing that needs ...
How to perform Startup Repair in Windows 7?
Method 1 of 2: Using the System Recovery Options
- Remove all external drives, CDs, and/or DVDs from your PC. ...
- Press and hold the Power button to turn off your PC. You can lift your finger once the PC is off.
- Press and hold F8 as you turn on the PC. ...
- Select Repair your computer and press ↵ Enter. ...
- Select a language and click Next. ...
- Click Startup Repair. ...
- Click Finish to repair and restart your PC. ...
Can't get past Windows 7 Startup Repair?
Windows 7: Can't get past windows 7 startup repair
- Boot your Windows 7 installation DVD
- When you see " Press any key to boot from CD or DVD ", press Enter
- At the " Language " screen hold the " Shift " key and press the F10 key to open a Command Window
- Type chkdsk /r and press Enter.
How to solve startup problem in Windows 7?
Windows 7 startup issues troubleshooting- how to do
- Method 1: Removing recently attached devices or external hardware. ...
- Method 2: Using Safe Mode. ...
- Method 3: Run msconfig. ...
- Method 4: Running CHKDSK and SFC command prompt. ...
- Method 5: Using Last Known Good Configuration. ...
- Method 6: Manually run startup repair. ...
- Method 7: Using System Restore in Safe Mode. ...
How do I fix Windows 7 startup repair failed?
First, power the computer completely down. Next, turn it on and keep pressing the F8 key as it boots. You'll see the Advanced Boot Options screen, which is where you would launch Safe Mode from. Select “Repair Your Computer” and run startup repair.
What do I do if my computer is stuck on startup repair?
2 Solutions to startup repair stuckMethod 1: Run chkdsk on the boot volume.Method 2: Disable Automatic Restart.Method 1. Run the sfc /scannow command (System File Checker) to repair file system.Method 2: Manually attempt to rebuild the BCD.Method 3: Fix Windows files manually.
How much time does Startup Repair take in Windows 7?
between 15 and 45 minutesStartup Repair in Windows 7 should take between 15 and 45 minutes. If it takes longer, something is wrong. Why does it take so long? It could be for two reasons: it is either stuck or your Windows simply can't fix the problem.
How do I bypass preparing automatic repair?
If the above trick fails, try the following solutions.Method 2. Boot your computer in Safe Mode. ... Method 3. Rebuild BCD with the Command Prompt. ... Method 4. Disable Automatic Repair at boot. ... Method 5. Run the Fixboot and Chkdsk commands. ... Method 8. Restore the Windows Registry. ... Method 9. Reset or Refresh Windows 10.
How do I fix the infinite boot loop in Windows 7?
How to Fix Windows Startup Repair Infinite LoopInsert the disc and reboot the system.Press any key to boot from the DVD.Choose your keyboard layout.Click Repair your computer at the Install now screen.Click Troubleshoot.Click Advanced options.Click Startup Settings.Click Restart...
Why does Startup Repair happen?
Startup Repair will run if you don't select from other options after a bad shutdown, one of which is to boot normally (the end user doesn't always follow what's onscreen so you end up looking like it's a do or die situation).
What happens when Windows 10 Startup Repair Fails?
If you are unable to perform a startup repair, then your next option is to try using your Windows 10 installation media to fix the boot error. If you don't have installation media, you will need to go to a working computer and Create a Windows 10 USB Bootable Flash Drive.
Why won't my computer get past the Windows startup screen?
Replies (9) Hello, you may need to run a Startup Repair in this case. If you can access the Restart button on the lock screen, hold SHIFT, and click the Restart button. If the restart button is inaccessible, you will need to create a Bootable USB using a different computer.
What is Windows 7 startup repair?
Windows 7 Startup Repair stuck also can be called Startup Repair Windows 7 loop. This error prevents you from accessing anything on your computer and presents an endless loop of loading Startup Repair.
What is startup repair?
It can be used to scan your computer and fix missing or damaged system files that prevent Windows from starting correctly. When Windows 7 fails to boot properly, this tool can be used to scans your PC for issues like corrupt system files or an invalid boot file, then tries to fix the problem.
Why is my computer stuck on startup?
If you stuck on computer startup repair screen, the problem is probably caused by damaged or corrupted BCD settings or corrupted boot partition. Follow the following steps to solve this problem.
How to restore AOMEI backup?
Boot the computer from the bootable media and it will take you to the main interface of AOMEI Backupper. Click Restore and follow the instructions. It only takes you a few clicks. If you want to restore to a dissimilar hardware, tick Universal Restore. Here is the Restore interface.
What is the command line tool for repairing a corrupted drive?
The command line chkdsk tool can be used to check (and sometimes repair) your drives for file system corruption.
What to do if your computer is too severe?
If the problem is too severe that all the above-mentioned method cannot solve the problem, you can try to perform a system restore. System restore can always be a simple solution to fix for this issue.
Does Aomei backup work on Windows 7?
With AOMEI Backupper, you do not need to bother about Startup Repair in Windows 7 not working issue. This software also can be applied to Windows 8/8.1/10/Visa/XP.
How to fix Windows 7 that won't boot?
If Windows 7 won’t boot properly and doesn’t show you the Error Recovery screen, you can get into it manually . First, power the computer completely down. Next, turn it on and keep pressing the F8 key as it boots.
What to do if Windows isn't starting?
If Windows isn’t starting properly, you can often use the integrated “startup repair” tool to fix it . This recovery tool will scan your PC for problems like missing or damaged system files. It can’t fix hardware issues or Windows installation problems, but it’s a great first place to start if you’re experiencing trouble booting into Windows.
What happens if Windows asks for password?
Windows will ask you for your password and attempt to automatically repair your PC.
