How to install it: 1. Turn off the sink’s water supply. If necessary, remove the old faucet. 2. Feed the flexible spray hose through the faucet’s spout—be sure you guide it in the right direction—and then through the hub.
How to install a kitchen faucet by Delta?
You'll Need:
- A Phillips head screwdriver
- 2 adjustable wrenches
- Safety glasses
- A flashlight
- A pot or bucket
- A towel
How to replace a Delta single handle kitchen faucet?
Remove the Faucet Handle and Spout
- The faucet handle is connected to the valve using a hex screw. ...
- Grab the handle and try to pull it out as you wiggle it at the same time.
- The handle could however be corroded and therefore not come off easily. ...
- Remove the cap assembly. ...
- Grab the spout and pull it out as wiggle it as well to detach it from the O-rings.
How to tighten a loose Delta kitchen faucet base?
What you need
- Phillips head screwdriver
- Flathead screwdriver (or knife)
- Hex head wrench (also known as an Allen key)
How to flush the lines on a Delta kitchen faucet?
Flush the Lines: Once the valves are completely disassembled, place a rolled up towel in back of the sink and turn a bucket upside down over the entire valve assembly. You’ll need an extra set of hands or something heavy to hold the bucket in place.
How do you install a faucet repair kit?
2:444:00How to Replace the Seats & Springs in a Single Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst install the ball valve align the pin to the slot on the side of the ball valve. And slide theMoreFirst install the ball valve align the pin to the slot on the side of the ball valve. And slide the valve in place the cam overtop the packing and align the tab to the slot.
How do you put a Delta kitchen faucet back together?
5:556:28Tutorial: Delta Kitchen Faucet Seal and Ball Assembly ReplacementYouTubeStart of suggested clipEnd of suggested clipUse your to limit it to make the Justin piece tight put the faucet back on the handle screw back andMoreUse your to limit it to make the Justin piece tight put the faucet back on the handle screw back and down Lynch. And then put the little blue red piece back on that's it so I'm goes up Jeff.
How do you install a Delta kitchen faucet cartridge?
2:569:11How To Replace Your Delta Single Handle Faucet Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou got your two valves. And you got the hole right here the whole lines like that so basically theMoreYou got your two valves. And you got the hole right here the whole lines like that so basically the orange goes straight down. In that motion there okay. So you're gonna take your cap.
How do you change a Delta single handle cartridge?
0:2712:08Delta Single Handle Faucet Cartridge Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipSet. This particular one is from Delta. All the other manufacturers have this style as well it'sMoreSet. This particular one is from Delta. All the other manufacturers have this style as well it's called a single lever faucet. And sometimes they're on the side like this on across the deck.
How do you change a stem assembly on a Delta faucet?
1:493:15How To Fix A Leaky Delta Two Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut the bonnet nut on over the cartridge and hand tighten it use the pliers or wrench to Snug it upMorePut the bonnet nut on over the cartridge and hand tighten it use the pliers or wrench to Snug it up but do not over tighten. Now reassemble the parts of the faucet handle.
How do you fix a Delta two handle kitchen faucet?
0:187:49Repair Delta Dripping Leaking Kitchen Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst up turn off the shut-off valves. And then when you turn on the faucet. The water should notMoreFirst up turn off the shut-off valves. And then when you turn on the faucet. The water should not flow out. The first thing to do is take the handles off and this top cover should come off. And then
How do you fix a Delta single handle kitchen faucet?
1:078:56Delta Kitchen Faucet Leak Repair (Single Handle) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is a double check to make sure that your water is off use a 1 8 inch hex head wrench to removeMoreThis is a double check to make sure that your water is off use a 1 8 inch hex head wrench to remove the set screw in the handle. Put the set screw in a parts pole to ensure that you will not lose.Delta Kitchen Faucet Leak Repair (Single Handle) - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you fix a Delta single handle kitchen faucet?
How do you replace a single handle kitchen faucet cartridge?
0:402:56How to Repair a Leaky Single Handle Cartridge Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst you will need to turn off the hot and cold water supply valve under the sink. Next you willMoreFirst you will need to turn off the hot and cold water supply valve under the sink. Next you will need to remove the single lever handle. This may require using an allen wrench to loosen the handle.How to Repair a Leaky Single Handle Cartridge Faucet - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you replace a single handle kitchen faucet cartridge?
How do you remove a Delta faucet assembly cap?
2:4710:00Delta Faucet Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce we get semi loose. We can set the adjustable wrench down and finish removing the cap assemblyMoreOnce we get semi loose. We can set the adjustable wrench down and finish removing the cap assembly by. Hand. Now that we've removed the cap assembly.Delta Faucet Repair - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you remove a Delta faucet assembly cap?
How do you take apart a Delta kitchen faucet?
1:018:56Delta Kitchen Faucet Leak Repair (Single Handle) - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith the water off turn the faucet to the on. Position. This is a double check to make sure thatMoreWith the water off turn the faucet to the on. Position. This is a double check to make sure that your water is off use a 1 8 inch hex head wrench to remove the set screw in the handle.
How do you take apart a single handle kitchen faucet?
0:423:11How to Repair a Leaky Single Handle Ball Kitchen Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis may require using an allen wrench to loosen the hammer. There may be a button that covers aMoreThis may require using an allen wrench to loosen the hammer. There may be a button that covers a screw that needs to be removed first and then you can loosen the screw and remove the lever handle.
How do you remove a single hole Delta kitchen faucet?
0:123:53How to Uninstall a Kitchen Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll need a few tools depending on your mounting nuts you'll need a couple of wrenches or maybeMoreYou'll need a few tools depending on your mounting nuts you'll need a couple of wrenches or maybe even a basin wrench a screwdriver safety glasses a flashlight.
How do you tighten a Delta single handle kitchen faucet?
1:003:03Delta Faucets-How to Install a Single Handle Kitchen Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe supply lines should fit within the u-shaped bracket screw the nut onto the end of the shank. AndMoreThe supply lines should fit within the u-shaped bracket screw the nut onto the end of the shank. And tighten the bracket up against the underside of the counter.