Repairing Guides

how to install a toilet flange repair ring

by Cody Carter Sr. Published 3 years ago Updated 2 years ago
image

  • Place the toilet bowl atop the new flange, aligning the bolt holes in the base of the bowl with the flange bolts. ...
  • Lower the bowl down and apply pressure to set the seal. Be careful not to move or tilt the toilet after setting it on the wax ring. ...
  • Replace the washers and nuts on each toilet bowl bolt and evenly tighten the nuts onto the bolts. ...
  • Replace the toilet tank atop the bowl and align the shank of the bolts with the holes in the bowl.
  • Secure the tank by tightening each tank bolt until the tank pulls down and meets the bowl.
  • Reattach the water supply line. Test the toilet for leaks by slowly turning on the water shutoff valve, allowing the tank to fill.
  • Flush the toilet and keep an eye on the base to make sure there are no leaks.

Part of a video titled How To Install A Toilet Flange Repair Kit And New Toilet Easy
0:17
11:06
Areas if you see the picture on the bottom left you'll see what a warped flange looks like a littleMoreAreas if you see the picture on the bottom left you'll see what a warped flange looks like a little better I'm using that repair kit that just popped up. So it's gonna be a good time.

How to properly install a toilet flange?

  • Follow the order of steps
  • Make measurements carefully
  • Be thorough

Can a toilet be properly installed without a flange?

The flange and accompanying bolts hold the toilet firmly to the floor and keeps the seal between the toilet and the floor. Without the flange or if it is broken, he would have to attach the toilet to the subfloor with wood screws, and if the floor is rotting out, those won't last long. All this is further explained here.

How to install a new subfloor around a toilet flange?

Required Tools for this Project

  • 4-in-1 screwdriver
  • Adjustable wrench
  • Corded drill
  • Drill bit set
  • Rags

How to repair a loose flange on a toilet?

Part 5 Part 5 of 5: Securing the Toilet in Place

  1. Set the toilet straight down on top of the flange. Line up the holes in the toilet base with the 2 bolts that protrude from the flange.
  2. Place the washers and nuts onto the exposed bolts. Put a plastic washer onto each bolt first, then follow with a metal one.
  3. Reconnect the water supply hose. ...
  4. Turn on the water supply to the toilet. ...

More items...

image

How do you install a toilet flange ring?

2:093:40How to Replace a Toilet Flange | Toilet Repair | The Home DepotYouTubeStart of suggested clipEnd of suggested clipIt on the flange with a rubber lip inside the drain next seal position the bowl so that the holes inMoreIt on the flange with a rubber lip inside the drain next seal position the bowl so that the holes in the base align with the flange bolts.

How do you use a flange repair kit?

1:1910:00How to Repair a Broken Toilet Flange on Cast Iron, PVC or ABS - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp clean it up as much as it needs to be. So now we have our part which is this is 3d plumbingMoreUp clean it up as much as it needs to be. So now we have our part which is this is 3d plumbing products toilet flange repair kit it's a new product.

How do you replace the wax ring on a toilet flange?

2:593:58Toilet Flange Wax Ring Replacement Part 1 of 2 - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the toilet drain is cleaned. Set the toilet back upright. Then take the plastic scraper. AndMoreOnce the toilet drain is cleaned. Set the toilet back upright. Then take the plastic scraper. And begin to scrape off the wax from around the sewer flange. And place the wax into the trash bag.

How do you replace a toilet ring?

1:403:33How to Replace Toilet Wax O-Rings : How to Fix Toilets - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you can use scraper go ahead and remove all that extra wax. Now take your wax ring and peel theMoreSo you can use scraper go ahead and remove all that extra wax. Now take your wax ring and peel the plastic. Away. Take your wax ring and firmly. Press it on the hole on the bottom of the toilet.

Should you caulk around toilet flange?

Caulk prevents a fouling area. If mop water, bathtub water, or a less pleasant “bathroom liquid” gets underneath the toilet, there is no way to clean it up. Caulking around the base of the toilet will prevent this from happening.

How do you seal a toilet flange?

3:279:05How To Replace A Toilet Wax Seal OR Rubber Toilet Seal ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you have to do is place it underneath the toilet bowl right there on the ring. Press a littleMoreAll you have to do is place it underneath the toilet bowl right there on the ring. Press a little firmly on it so that it sticks to the bottom. And then just align it with your toilet.

Does the wax ring go on the toilet or the flange?

Place the wax ring on the closet flange, not on the toilet. Pick up the toilet and set it evenly over the closet flange, making sure the bolts come through the bolt holes in the toilet base. Fine-tune the toilet position, so it's right where you want it, then push it straight down so it smashes the wax evenly.

Are rubber toilet rings better than wax rings?

It all comes down to your personal preference. If you feel more comfortable using something tried and true, stick to a wax ring. For a newer mess-free approach, wax-free toilet seals are the way to go.

Do I need wax ring with flange?

The flange helps to ensure that the ring is centered over the flange in the floor and to direct the waste into the pipe. More wax in the ring helps ensure a good and thick seal. That's not good advice. If you use extra wax where not needed it can squeeze into the path of the water.

Which way does a wax ring on toilet go?

How to use wax when installing a toilet bowlClean surfaces on underside of toilet bowl and floor flange of old wax and debris.Remove old floor bolts, and place new bolts secure with the retainer washer. ... Press wax ring on bowl outlet with plastic flange pointing away from the bowl.More items...

Are all wax rings for toilets the same size?

Wax rings come in two diameters, 3 inches and 4 inches, because — as you might expect — those are the two standard sizes for toilet waste openings. Besides diameter, thickness is also an important parameter when it comes to wax rings. Again, there are two possibilities: regular and extra thick.

Should you caulk around a toilet?

Caulk Keeps the Toilet Secure Think again! Caulk keeps your toilet secure the floor, and avoids any chance of injury or toilet malfunctioning. It's actually required by the International Plumbing Code to caulk a toilet to the floor, and now knowing the reasoning behind it, why would you not want to?

How do you fix a broken flange?

0:051:17How to Repair Broken Toilet Flange - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo begin remove the broken or corroded sections of the existing ring. Next apply liberal amount ofMoreTo begin remove the broken or corroded sections of the existing ring. Next apply liberal amount of silicone to the top of the existing.

How do you repair a broken toilet flange on a concrete floor?

1:293:52How to Fix a Toilet - Cement Sub-Flooring Repairs - Part 1 of 2YouTubeStart of suggested clipEnd of suggested clipItself the second way to fix this problem is to cut out the damaged flanges metal ring leaving theMoreItself the second way to fix this problem is to cut out the damaged flanges metal ring leaving the ABS coupling and install an inside fitting flange. The reason this technique is suggested.

How do you fix a PVC toilet flange in concrete?

4:5710:54How to Replace a Broken PVC Toilet Flange (Start to Finish) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd make sure that it's a smooth bit and now I'll go ahead and glue it you want to install. TheMoreAnd make sure that it's a smooth bit and now I'll go ahead and glue it you want to install. The flange so when it's down in there it's sitting just the height of the flange off the floor.

How do you repair a metal toilet flange?

2:146:34Broken Rusted Closet Flange Replacement Kits | How To - YouTubeYouTubeStart of suggested clipEnd of suggested clipItself is actually raised. Too high off the ground. So I already have issues there where you know IMoreItself is actually raised. Too high off the ground. So I already have issues there where you know I can actually cut off the flange. Itself and put in a new one.

How do I reinstall a toilet?

Reinstall toilet by using Johni-bolts (the bolts that connect the toilet to the floor) as a guide. Make sure you hold the toilet as level as possible when placing it onto the new wax seal. The toilet tank should be parallel to the wall behind it.

How to stop a toilet from leaking?

Use a water absorber, like LiquiLock, to temporarily solidify the remaining water, turning it into a gel, which will help prevent drips and leaks when removing the toilet fixture. The gel will dissolve when additional water is added.

Can you rock a toilet?

Do not rock the toilet as it is placed on the new wax seal. Use a slight side-to-side twisting motion until the toilet bowl is resting on the bathroom floor.

Can you use knockout plugs on cast iron?

For new construction or remodels, there are flanges with knockout plugs that allow you to test the system without having to use a test ball or plug, while also keeping sewer gases from escaping.

Can you repair a toilet flange?

The good news? With the proper tools, a little know-how and a trip to the local hardware store, most people can effectively repair their own toilet flanges without breaking a sweat (or the bank!)

What is a toilet flange?

Learn more... A toilet flange connects the bottom of a toilet to the drainpipe in the floor of the bathroom. When a toilet is leaking from the base, you may need to replace the toilet flange.

How many screws are in a toilet flange?

If so, use a mallet to tap plastic wall anchors into the holes, then drive the screws through the flange lip and into the anchors. Most toilet flanges come with 4 screws, but yours may have more or fewer.

Why does wax come out of the toilet when you tilt it?

If you tilted the toilet while installing it, it could have caused the wax to squeeze out more on one side. After you placed it the rest of the way down, that now-flattened side could have left a gap, allowing smells to escape. This is why it's important to install the toilet as perpendicular as possible.

How big should an outflow pipe be?

Measure the interior diameter of the exposed outflow pipe. In most cases, the pipe should measure 4 in (10 cm) in diameter. Jot this measurement down for reference when you go to buy the new flange.

What is the flange made of?

It’s probably either made of PVC but glued to a PVC outflow pipe, or it’s made of cast iron and integrated into the cast iron outflow pipe.

How to check for a leak in a toilet?

Flush the toilet multiple times to check for leaks. Carefully check the floor around the base of the toilet. If it stays dry, you’re all set. If you see any water seeping out, you’ll need to remove the toilet and try again—or call a plumber.

How to lift a toilet?

Toilets weigh between 70–120 lb (32–54 kg), so get help if you’re not sure you can lift it. To lift it alone, straddle the bowl, bend your knees, grip the underside of the toilet between the bowl and tank, and lift straight up with your legs ( not your back).

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9