Here are the steps:
- Secure the tools needed for the installation, including a pipe wrench, pair of pliers, bucket, sponge, pair of scissors, a bucket and a hand saw.
- Familiarize yourself with the repair kit’s contents, check out the instructions sheet and then assemble the necessary hand tools. ...
- Turn the toilet’s water supply off. Then, remove the tank lid and flush the toilet to drain out most of the water. ...
- Pull off the old rubber fill tube from the flush and fill valve and detach the flush chain from the tank lever and the flapper valve. ...
- Move to the lower-left bottom of the tank to loosen the coupling nut securing the water supply line to the threaded shank on the fill valve. ...
- Pull off the rubber gasket from the bottom of the flush valve, and then push the old tank bolts out and unscrew the plastic flush valve collar nut to ...
- Push the larger shank washer onto the threaded bottom of the new fill valve with the tapered side facing down, and then push one end of the new rubber ...
- Finding the new flush valve assembly, remove the new rubber gasket, plastic collar nut and the cardboard shipping ring on the rubber flapper. ...
- Slide the new rubber gasket over the flush valve with the tapered side facing towards you, and then lift the tank and carefully place it back on top of ...
Full Answer
Why choose Fluidmaster everything kits?
The Everything Kits even comes with the tools needed to complete the job! Don't live with a noisy, slow or running toilet. Grab a complete toilet repair kit or installation kit and let Fluidmaster fix your problems today.
What tools are needed to install a Fluidmaster toilet repair kit?
The tools needed to install this Fluidmaster kit include a pipe wrench, pliers, scissors, a bucket, a sponge, and a hand saw. The first few steps are to familiarize yourself with the contents of the Fluidmaster Complete Toilet Repair Kit, look over the instructions sheet, and assemble the necessary hand tools.
Do you overtighten Fluidmaster tank bolts?
Do Not Overtighten! This Fluidmaster Complete Repair Kit (model # 400AKR) came with wing or "thumb" nuts to help keep the standard nuts on the tank bolts from loosening. The original toilet tank bolts did not have these, but I figured they couldn't hurt and threaded the wing nuts on to the bolts below the other nuts.
How to install a pipe repair kit?
Here are the steps: 1. Secure the tools needed for the installation, including a pipe wrench, pair of pliers, bucket, sponge, pair of scissors, a bucket and a hand saw. 2. Familiarize yourself with the repair kit’s contents, check out the instructions sheet and then assemble the necessary hand tools.
How do I install a new fluidmaster?
0:433:11How to Install a Fluidmaster 400A Toilet Fill Valve - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo it doesn't turn remove the old lock nut. Then pull out the old fill valve and drain. The waterMoreSo it doesn't turn remove the old lock nut. Then pull out the old fill valve and drain. The water take your new fluid master fill valve. And adjust the height by twisting.
What is the most common problem associated with the fluidmaster?
COMMON PROBLEMSToilet Tank Won't Fill Up Or Is Slow To Fill.Toilet running constantly.Toilet flushes on its own (Ghost Flushing)
How do you fit a fluidmaster?
5:5114:14How to fit a toilet flush valve & fill valve. Fluidmaster dual flush ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you're only replacing the fill valve. This is the only one you need to do. So again using aMoreIf you're only replacing the fill valve. This is the only one you need to do. So again using a spanner. And do that and if you clockwise. And that's a really simple. Job just put your hand. Inside.
How do you take the top off a fluidmaster fill valve?
0:111:32REMOVING CAP ASSY FROM A FLUIDMASTER 400 SERIES FILL ...YouTubeStart of suggested clipEnd of suggested clipUsing the arm as leverage push on the arm twist. The cap assembly. And the arm simultaneouslyMoreUsing the arm as leverage push on the arm twist. The cap assembly. And the arm simultaneously counterclockwise one eighth of a turn and that cap should pull right off to replace the cap assembly.
Why does my toilet keep running fluidmaster?
My Fluidmaster Keeps Running! This fill tube connects the fill valve to your toilet overflow tube. Ensure that it's firmly attached; the water stream should go right into it when flushed. The float might also not be in the proper position. If it is too high, the valve won't shut off, and the toilet will keep running.
Can a fluidmaster be repaired?
Fixing a toilet fill valve (once referred to as a ballcock) is relatively easy to repair if you happen to have a common Fluidmaster brand valve. Often, repairing a fill valve is done by simply replacing the entire fill valve, but Fluidmaster fill valves can be repaired by just replacing a seal inside the unit.
How do you replace a Fluidmaster toilet fill valve?
1:324:06How to Install a Fluidmaster Bottom Entry Fill Valve - For UK CustomersYouTubeStart of suggested clipEnd of suggested clipUsing the appropriate wrench. Under the connection get a towel to soak up any residual water thatMoreUsing the appropriate wrench. Under the connection get a towel to soak up any residual water that will come out of the valve. After you've changed undo the back nut to the filling. Valve.
How do you replace a flush valve seal fluidmaster?
0:110:56Replacing the 242 seal in a Fluidmaster 400 series fill valveYouTubeStart of suggested clipEnd of suggested clipThe cap assembly video that I made basically twist the cap counterclockwise 1/8 of a turn locate theMoreThe cap assembly video that I made basically twist the cap counterclockwise 1/8 of a turn locate the seal underneath the cap assembly to pull it out simply take it by your fingertips.
How do you replace a bottom fill valve?
1:454:48How to Install a Bottom Entry Fill Valve in your Toilet Cistern. - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere once we've got this wound off we should be able to remove our whole valve. Now we should beMoreHere once we've got this wound off we should be able to remove our whole valve. Now we should be able to just lift our valve. Out. Like. So now what i usually do is i undo. The nut off the bottom.
Is water supposed to come out of the top of the fill valve?
The water is leaking out of the cap simply because the pressure pushing up on the cap is very high, and the cap cannot handle that high pressure. However, the high-pressure water should be escaping into the toilet tank and not pushing against the cap.
Why is my toilet fill valve leaking at top?
0:381:29Fill Valve Problems - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe problem is directly related to the fill valve. Sometimes the fill valve only needs a minorMoreThe problem is directly related to the fill valve. Sometimes the fill valve only needs a minor adjustment to return it to proper function.
How do I remove a toilet inlet valve cap?
0:311:55How to Flush the Fill Valve on KOHLER Two-Piece ToiletsYouTubeStart of suggested clipEnd of suggested clipTo begin turn off the water supply to the toilet remove the tank cover and locate the float capMoreTo begin turn off the water supply to the toilet remove the tank cover and locate the float cap assembly in this toilet it's red but it may be a different color in your toilet.
How do you repair a toilet fluidmaster?
0:013:41How to Fix a Running Toilet with Fluidmaster 400H Fill Valve from ...YouTubeStart of suggested clipEnd of suggested clipThis only takes a minute or two it's super easy then remove the water supply line that's connectedMoreThis only takes a minute or two it's super easy then remove the water supply line that's connected to the old fill valve.
Why is my toilet making a hissing sound?
A: The hissing noise is most likely a defective refill valve. There are two valves inside the tank on the back of the toilet bowl. One is the flapper valve, located at the bottom of the tank, which allows water to enter the bowl.
How do you adjust a fluidmaster flush valve?
1:111:53FluidMaster® Fill Valve : Adjusting Your Water Level - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the adjusting screw as the water begins to refill in the tank. You want to turn the adjustingMoreAnd the adjusting screw as the water begins to refill in the tank. You want to turn the adjusting screw on the end of your fill valve. You will turn the screw. Counterclockwise.
How does a fluidmaster valve work?
The fill valve fills the toilet tank with water from the water supply line after it has been emptied by a flush. It replaces the ballcock and is more efficient and easy to install. This is an anti-siphon design-fill valve with adjustable height from 9″ to 14″.
What is a Fluidmaster kit?
Fluidmaster’s Everything Kit includes everything you need to fix your 2″ flush valve toilet in one trip and one purchase. To learn more about this product, please click here: K-400H-021
What is a Fluidmaster 400H toilet fill valve?
The 400H is the newest and most high performance fill valve from Fluidmaster. It is the most quietest toilet fill valve with the most powerful flush. Fluidmaster invented the fill valve technology back in 1958. To learn more about this product, please click here: 400H
What is a Performax kit?
The PerforMAX® All-In-One Kit is the premium solution to make your 2″ flush valve toilet run like new! This toilet repair kit is the best solution for common toilet problems, such as noisy toilet, running toilet, slow filling toilet, weak toilet flush, not enough water in toilet bowl, etc. To learn more about this product, please click here: 402CARHR Toilet Repair Kit
What is a performax fill valve?
The PerforMAX® Fill Valve and 3″ Flapper Kit is the best solution for 3″ flush valve toilets that are having problems such as noisy toilet, running toilet, slow filling toilet, and not enough water in toilet bowl. To learn more about this product, please click here: 400CAR3
What is a glacier bay flush valve?
The Glacier Bay® Dual Flush Valve is designed to be an exact replacement dual flush valve for your Glacier Bay 3” Flush Valve Toilet. To learn more about this product, please click here: 830VBGB
What is a Performax toilet repair kit?
The PerforMAX® All-In-One Toilet Repair Kit is the best, comprehensive, solution for common toilet problems. To learn more about this product, please click here: 400ARHR All-In-One Repair Kit
When was the Fluidmaster 400A toilet valve introduced?
Fluidmaster®’s 400A Universal Toilet Fill Valve is the #1 best-selling fill valve in the world! This valve was originally introduced in 1975 .
What is Fluidmaster Complete Repair Kit?
This Fluidmaster Complete Repair Kit (model # 400AKR) came with wing or "thumb" nuts to help keep the standard nuts on the tank bolts from loosening. The original toilet tank bolts did not have these, but I figured they couldn't hurt and threaded the wing nuts on to the bolts below the other nuts.
What is included in Fluidmaster Complete Toilet Repair Kit?
The kit includes a new fill valve assembly, a flush valve assembly with adjustable flapper valve, a flush lever, a rubber fill tube, new gaskets, new tank bolts with nuts, rubber washers and metal washers.
Where do you pull the lock nut out of a tank?
Once the lock nut is removed from the bottom of the fill valve, you can pull it out from the inside of the tank.
Where is the flush handle on a toilet?
Unscrew the white plastic nut that secures the chrome colored flush handle and lever to the top left of the toilet tank.
Product Overview
The Fluidmaster 400ARHRKP10 All-In-One Toilet Repair Kit offers the most premium solution and upgrade to enhance your toilets performance. This toilet repair kit offers everything needed to make your toilet run like new. Kit includes the PerforMAX Toilet Fill Valve for 2X greater refill rate, the 507AK PerforMAX 2 in.
Info & Guides
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
