
Insert the washer into the new gate and press the new gate into the tub spout opening and connect the new Diverter knob to the new gate. Replace your tub spout back onto the pipe stub-out nipple, slowly turn the water on and ensure there are no leaks. Danco offers Tub Spout Adapter Kit to assist you with installing a new tub spout!
How to replace tub spout, change tub diverter. easy?
Tools Required
- 4-in-1 screwdriver
- Adjustable wrench
- Caulk gun
- Internal pipe wrench
- Tube cutter
How to remove a rusted tub spout?
- You can use sea salt or iodized table salt, but it needs to be fine in order to effectively soak up the lemon juice and form a paste.
- If your bathtub has a shelf with rust on it, you can use lemon juice and salt to remove it from there.
- If you don’t have lemons or lemon juice, you can use lime or lime juice!
How to remove the tub spout?
Remove a Screw-On Spout
- Protect the Spout From Scratches Cover the spout with a soft cloth so the finish isn't scratched during removal.
- Loosen and Unscrew the Spout Turn the screw-on spout counterclockwise slowly using a pipe wrench. ...
- Remove Old Caulk and Plumber's Tape Remove the old caulk using a chemical caulk remover and a putty knife. ...
How do I remove my bathtub spout?
- When removing a slip-on spout, remove the set-screw at the bottom of the spout. Use an Allen wrench or appropriate screwdriver based on the type of screw.
- Pull the spout from the wall with both hands.
- When removing a threaded spout, place the jaws of locking pliers or a pipe wrench around the spout and tighten until secure. ...

How do you install a tub spout with a diverter?
3:184:33Universal tub diverter spout installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipGasket. Then I'll wrap the adapter with a little bit of teflon tape. The last step is to thread theMoreGasket. Then I'll wrap the adapter with a little bit of teflon tape. The last step is to thread the extension nipple that's in the diverter spout onto the adapter that is on the copper pipe.
How do you fix a bathtub spout diverter?
1:077:29Tub Spout Diverter Repair or Replace? - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut you might be able to just take a pair of pliers. And another pair of pliers. And hold the postMoreBut you might be able to just take a pair of pliers. And another pair of pliers. And hold the post while you unscrew. This probably the second easiest way is just to take a hacksaw blade.
How do you replace a diverter spout?
0:153:36how to replace tub spout, change tub diverter. Easy! - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt. So first we're going to just try to spin this guy off. And it's spinning pretty easy we've got aMoreIt. So first we're going to just try to spin this guy off. And it's spinning pretty easy we've got a set screw under here. But it looks like this will probably just spin.
How do you put a shower diverter back in?
0:596:11Tub faucet spout diverter pull lever broke off - DIY fix - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd on the very bottom is an allen screw. As you can see right there it's basically trial and errorMoreAnd on the very bottom is an allen screw. As you can see right there it's basically trial and error until you find the proper size allen wrench go ahead and insert it into the screw.
How do you install a diverter?
0:000:55How to Install Delta Diverter Valve - #shorts - YouTubeYouTubeStart of suggested clipEnd of suggested clipBe set at the right depth. So i just used some wood blocking to accomplish that i screwed it inMoreBe set at the right depth. So i just used some wood blocking to accomplish that i screwed it in place made sure my horizontal pipe was nice and level and then i prepped.
How do you fix a shower diverter valve?
0:497:49How to repair replace 3 way Shower Faucet Diverter - FAST & EASY!YouTubeStart of suggested clipEnd of suggested clipSet the screw in a safe location. And we can pull the cap off now see how easy that was chances areMoreSet the screw in a safe location. And we can pull the cap off now see how easy that was chances are yours might not be that easy yours might be very rusted corroded and oxidized.
How much does it cost to replace a shower diverter?
Replacing a shower diverter valve costs $225 to $575, including materials and labor. A shower diverter valve switches the flow of water between the bathtub spout or shower head and is typically controlled by a small handle located on the center trim plate or near the tub spout.
Why is my shower diverter not working?
The most common issue with a shower diverter is when water comes out of both the tub faucet and the showerhead. Check to be sure there is no residue clogging the shower diverter lever from fully lifting or lowering. If everything looks clear, the problem could be worn-out parts in the shower diverter valve.
How much does it cost to replace a shower diverter?
Replacing a shower diverter valve costs $225 to $575, including materials and labor. A shower diverter valve switches the flow of water between the bathtub spout or shower head and is typically controlled by a small handle located on the center trim plate or near the tub spout.
How does a bathtub tee diverter work?
Tee diverter: This single-valve diverter is located on the end of the tub spout. The user pulls up on the diverter arm to send water to the showerhead. Pushing the arm down restores flow to the tub spout.
When I turn my shower on water still comes out the faucet?
Most likely you are experiencing "shower-rise," where the water can't get out of the spout as fast as it flows through the valve. This causes the water to back up and come out the shower head. There can be one of several reasons for this: The valve could be upside down.
Step 1: Expose The Diverter Assembly
Feel around the faucet near the wall on the bottom side and locate the indention that holds an an Allen screw. You may not find one, as many faucet...
Step 2: Repair The Faulty Diverter
Locate the rubber washer and replace. This removes the potential for leakage. Go through the diverter assembly and lubricate all moving parts to en...
Step 3: Replace Diverter (If Necessary)
The diverter most likely will not need to be replaced but instead be maintained by lubrication and replacement of any washers in the assembly. If t...
Step 4: Reassembly
Reverse the above instructions to reinstall the parts of the tub. Verify all moving parts are working, screw the spout back onto the assembly and t...
What is a universal tub spout?
Universal tub spout with diverter kit (if needed) The diverter tub spout in your bath/shower assembly makes bathing or showering very convenient. If for some unforseen reason you find that your diverter tub spout stops working properly, you should consider repairing it yourself before calling in a plumber. Following these directions will help you ...
Do you turn off the water when repairing a tub diverter?
Things to Consider. When repairing the diverter assembly in a tub it is not necessary to turn off the water to the home because the diverter is located on the dry side of the plumbing fixtures in the tub. Do not turn on the water faucets in the tub while you have the faucet removed and the diverter exposed.
Can you turn on the water faucet in a tub?
Do not turn on the water faucets in the tub while you have the faucet removed and the diverter exposed. If you do you will cause water to spout from the pipe into your home instead of through the intended water path.
