how to launch startup repair windows 7

^{Run Startup Repair first with installation disc}

1. Create Windows 7 installation media on a working computer. ...
2. Plug the USB drive into your computer.
3. Start your computer and press the corresponding key to go to BIOS.
4. Set boot priority to your drive in the Boot option.
5. Save changes and restart your computer. Then, you will see a black screen with error message like " Press any key to boot from CD or DVD ...
6. After that, you will go to the Install Windows screen, click Repair your computer.
7. Select the operating system Windows 7 in the System Recovery Options window and click Next. ...
8. Select Startup Repair in the System Recovery Options and it will automatically start to repair boot sector or MBR in Windows 7. ...

Full Answer

Why is Windows 7 not starting?

There are multiple reasons of this issue and we have listed some of them you can check below:

• The external devices that are connected to the laptop.
• There is no enough power in your ASUS.
• Your laptop screen is broken.
• Minor system issues cause this problem.
• Other uncertain software glitches or hardware issues.

How to fix Windows 7 when it fails to boot?

Solution 2: Run Chkdsk to Fix Disk Boot Failure on Windows 10/8/7

1. Boot PC with a Windows install disc Insert a Window installation CD into your computer. ...
2. Choose Command Prompt Select your Windows installation drive and press "Next" to move on. In most cases, you can click C drive as your default Windows installation drive. ...
3. Run chkdsk utility

How to start the Windows 7 Recovery Environment?

• Type and search [Change advanced startup options] in the Windows search bar ①, then click [Open]②.
• Click [Restart now]③ in Advanced startup section.
• The system will restart and enter WinRE. (The following picture showed is WinRE.)

How to repair Windows 7 without losing data?

Reinstall Windows 7 without losing files

1. Boot up your Windows 7 computer (Safe Mode or normal mode). then insert the installation DVD or USB disk.
2. Open Windows File Explorer, and then open the DVD drive in File Explorer. Locate the Setup.exe file and double-click to run it. ...
3. Then you will see Windows 7 Windows 7 installation page appear on your desktop. ...

How do I run Windows Startup Repair?

Hold the Shift key down at the Windows sign-in screen and press the Power button at the same time.Continue holding the Shift key, then click Restart.Once the PC restarts, it'll present a screen with a few options. ... From here, click Advanced options.In the Advanced options menu, choose Startup Repair.More items...•

How do I force a Windows 7 repair?

First, power the computer completely down. Next, turn it on and keep pressing the F8 key as it boots. You'll see the Advanced Boot Options screen, which is where you would launch Safe Mode from. Select “Repair Your Computer” and run startup repair.

How do I run Startup Repair from command prompt?

And then you'll need to click Advanced options.Click Startup Repair.Click System Restore.Select your username.Enter your password.Type "cmd" into the main search box.Right click on Command Prompt and select Run as Administrator.Type sfc /scannow at command prompt and hit Enter.More items...•

How do I repair Windows 7 with command prompt?

If you don't have the installation discReboot the computer.Press F8 as the Windows 7 logo appears.Select Repair Your Computer. ... Hit Enter.Select Command Prompt.When it opens, type the necessary commands: bootrec /rebuildbcd.Hit Enter.

How to Use Startup Repair in Windows 7

In order to proceed, you’ll need your Windows 7 installation CD or a system repair disk. Otherwise, the only way to start this type of repair is for your PC to do it automatically during boot. Startup repair in Windows 7 can be a useful tool for users, but keep in mind the following before we continue.

Booting into Startup Repair in Windows 7

If you’re ready to boot into system repair on your own, insert your system repair disk or installation CD, then turn off your PC completely.

Conclusion

Remember that startup repair is only available to fix very specific issues with your Windows 7 PC. It’s not foolproof, can take multiple times to fix the primary issue and may not work at all.

What is startup repair?

Startup Repair is a utility created by Microsoft itself that is designed to fix any problems with Windows startup. Startup Repair is meant to be used when your computer is having trouble starting up.

How to repair Windows 7?

When you reach a window that has an Install now button at its very center, click on Repair your computer in the bottom left of the window. Select the Operating System you want to repair. If Windows 7 is your only Operating System, only it will be displayed in the list. At the System Recovery Options window, click on Startup Repair.

How to create a repair disc?

A system repair disc can be created by navigating to Start > Control Panel > System and Maintenance > Backup and Restore > Create a system repair disc.

What is Windows 7 startup repair?

Windows 7 Startup Repair stuck also can be called Startup Repair Windows 7 loop. This error prevents you from accessing anything on your computer and presents an endless loop of loading Startup Repair.

What is startup repair?

It can be used to scan your computer and fix missing or damaged system files that prevent Windows from starting correctly. When Windows 7 fails to boot properly, this tool can be used to scans your PC for issues like corrupt system files or an invalid boot file, then tries to fix the problem.

Why is my computer stuck on startup?

If you stuck on computer startup repair screen, the problem is probably caused by damaged or corrupted BCD settings or corrupted boot partition. Follow the following steps to solve this problem.

What to do if your computer is too severe?

If the problem is too severe that all the above-mentioned method cannot solve the problem, you can try to perform a system restore. System restore can always be a simple solution to fix for this issue.

How to repair Windows 7 without disk?

Step 1. Turn on your computer, press and hold the F8 key to go to the Advanced Boot Options screen, then choose Safe Mode with Command Promp t. Step 2. You can try command prompt for Windows 7 boot repair above and see if it works.

How to install Windows 7 on a USB drive?

Step 1. Create Windows 7 installation media on a working computer. You can download ISO image files from Microsoft Store and burn the ISO image files to a USB drive or CD/DVD via Windows 7 USB DVD download tool. Step 2. Plug the USB drive into your computer.

How to create a backup for a BCD file?

Step 1. In the command prompt window, type bcdedit /export C:BCD_Backup to create a backup for BCD. Step 2. Then, type notepad in the command prompt window . Youw ill see a pop up window, click File > Open > Computer, find the BCD file and rename it as BCD.old. After that, save the change and exit this window.

What happens if you don't have a boot sector?

If you don't have, you can create system repair disc or recovery disk on a working computer. Then, let's start with detailed steps below.

Can you repair Windows 7 startup?

If you can repair boot with command prompt in Windows 7, you are very luck. But, sometime, you will fail to repair startup issue. To ensure the security of your data and your computer, you'd better to create a system backup or disk backup in advance.

How to roll back Windows 7 update?

1. Access the Safe Mode by pressing the F8 key while the system is booting up.

How to check if Windows 7 is in safe mode?

Once you have booted into Safe Mode, you will see an environment that’s similar to the usual Windows 7 desktop. Now you can search for “Programs and Features” under the Start Menu. Then click on “View installed updates ”.

How to run chkdsk?

To run chkdsk, please do as follow: 1. Insert your Windows 7 installation disc into the CD drive, and boot Windows from the disk. 2. Press any key when you see “Press any key to boot from CD or DVD.”.