how to perform a windows xp repair install

by Stefan Koch Published 3 years ago Updated 2 years ago

How to Perform a Repair Install of Windows XP

Follow steps 1 to 3 from the Repair Install instructions above.
On the "Welcome to Setup" screen select the repair using the recovery console option by pressing the "R" key.
After selecting your installation which is usually "1" and a password if you have one, type the below command...
When the copy operation has finished, type Exit. Boot the XP CD again and now perform your Repair Install.

Full Answer

How do I repair my Windows XP installation?

Steps Download Article

Backup your data. Although a Repair Install should not affect any of your data, it is always good to be prepared in case something goes wrong.
Insert your Windows XP setup disc. If you bought your computer from a manufacturer such as Dell, you may have a recovery disc instead of a Windows XP disc.
Reboot the computer and enter the BIOS. ...

More items...

How to fix Windows installer on XP?

How To Fix Windows Installer Error Windows Xp? The first step to resolving the error is to reregister the Windows Installer. Open programs should be closed. You need to click Start, Run, type msiexec /unregister in the Open box, and then click OK to complete the process.

How to install Windows XP in a new computer?

The installation

Get a legitimate Windows XP license and ISO CD image. No license, no installation as simple as that. ...
Configure your BIOS. XP was created in an era where there was no Serial-ATA (SATA) drives, no SSD drives, no UEFI, no GPT, USB was starting to get ...
Slipstream AHCI drivers into WinXP installation media to avoid F6 problem. ...

More items...

How to setup Windows XP from USB drive?

What you need

Format the drive and set the primary partition as active. Connect the USB flash drive to your technician PC. ...
Copy Windows Setup to the USB flash drive. ...
Install Windows to the new PC. Connect the USB flash drive to a new PC. ...
If your Windows image is larger than 4GB. Windows USB install drives are formatted as FAT32, which has a 4GB filesize limit. ...

How can I repair Windows XP?

To do this, follow these steps:Restart the computer in the Recovery Console. ... Type the following commands, and then press ENTER after each command: ... Insert the Windows XP installation CD into the computer's CD drive, and then restart the computer.Perform a Repair installation of Windows XP.More items...

How do I repair Windows XP with installation disk?

Select Recovery ConsoleInsert the installation CD and restart your computer.At the “Press any key” screen, press any key to boot from the CD.Press ENTER to enter the setup process.Read and agree to the license agreement by pressing F8.Select your current Windows XP installation from the list and then press R.More items...

How do I run Windows XP startup repair?

To repair the Windows XP startup, just type the command "fixboot" and confirm by typing the letter "y".

How do you perform Windows repair install?

Here's how:Navigate to the Windows 10 Advanced Startup Options menu. ... Once your computer has booted, select Troubleshoot.And then you'll need to click Advanced options.Click Startup Repair.Complete step 1 from the previous method to get to Windows 10's Advanced Startup Options menu.Click System Restore.More items...•

How do I repair Windows XP without a CD?

Using System RestoreLog in to Windows using an administrator account.Click “Start | All Programs | Accessories | System Tools | System Restore.”Select “Restore my computer to an earlier time” and click “Next.”Choose a restore date from the calendar and select a specific restore point from the pane to the right.More items...

How can I repair Windows XP with command prompt?

Launch System Restore from a command prompt in Windows XPRestart. your computer and press [F8] during the initial startup.When. you see the Windows Advanced Options Menu, select the Safe Mode with a Command. ... Select. the Windows XP operating system.Log. ... Type.

What is the Windows repair tool?

Windows Repair is a utility that contains numerous mini-fixes for Windows. This tool will allow you to repair common issues with your computer such as firewall, file permission, and Windows Update problems. When using this tool you can select the particular fixes you would like to launch and start the repair process.

How do you do DISM?

Open Start. Search for Command Prompt, right-click the top result, and select the Run as administrator option. Type the following command to perform an advanced DISM scan and press Enter: DISM /Online /Cleanup-Image /ScanHealth.

How do I fix startup repair?

First, power the computer completely down. Next, turn it on and keep pressing the F8 key as it boots. You'll see the Advanced Boot Options screen, which is where you would launch Safe Mode from. Select “Repair Your Computer” and run startup repair.

How do I create a recovery USB for Windows XP?

Creating a Windows Recovery USBThese instructions won't work on Windows XP! ... Step 1: Plug in your USB drive. ... Step 1: Copy the ISO image to the USB. ... Step 1: Go to BCD Deployment. ... Step 2: Select your partition from the drop-down menu. ... Step 3: Install BCD to USB. ... Step 4: Allow EasyBCD to load USB bootloader.More items...

How do I repair Windows SYSTEM32 config system?

Fixing “\WINDOWS\SYSTEM32\CONFIG\SYSTEM is missing or corrupt” on WindowsDownload Easy Recovery Essentials. ... Burn the image. ... Boot up your PC from the Easy Recovery Essentials CD or USB you created.Once EasyRE is running, choose the “Automated Repair” option and click Continue .More items...

Can I reinstall Windows XP without losing data?

Reinstalling Windows XP can repair the OS, but if work-related files are stored to the system partition, all of the data will be erased during the installation process. To reload Windows XP without losing files, you can perform an in-place upgrade, also known as a repair installation.

How do I fix Windows XP Hal DLL missing from USB?

How to Fix Missing Hal. dll ErrorsRestart your computer. ... Check for proper boot order in BIOS. ... Run System Restore from a Command Prompt. ... Repair or replace the boot. ... Write a new partition boot sector to the system partition. ... Recover data from any bad sectors on your hard drive. ... Restore the hal.More items...

What does "repair install" mean?

A repair install will fix any files system files affected by a virus, but will not remove the virus itself. This means that the files could become infected again unless the virus is removed.

When did Windows XP end support?

With Microsoft ending all support for Windows XP in April 2014, this might be the perfect time for an upgrade. See this guide for upgrading to Windows 7 and this guide for upgrading to Windows 8.

What are the key combinations for Windows 10?

The key varies from system to system, and will be displayed beneath the manufacturer's logo. Common keys include: F2, F10, F12, and Delete. If Windows begins to load, the Setup key was not pressed in time and you will have to retry. Change your boot order.

Why is my computer throwing a lot of errors?

Has Windows been throwing a lot of errors at you lately? It could be that some of your critical system files have become corrupt. This can happen for a variety of reasons, but a Repair Installation can fix a lot of the problems. A Repair Installation will restore your computer's vital system files without touching your personal files. See Step 1 below to learn how.

How to delete system32?

You have to delete system32 from your files: 1.) Select files. 2.) Click local disk (:C). 3.) Click on Windows. 4.) Search system32 and delete it .

How to agree to Windows license agreement?

Press F8 to agree to the Windows License Agreement.

Where is my Windows product key?

Your Product Key is typically located on the case that the Windows disc came in, or on a sticker affixed to your computer.

How to check Windows XP version?

Verify the version of Windows XP that is installed on the computer 1 Click Start, click Run, type Winver.exe in the Open box, and then click OK. 2 In the About Windows dialog box, verify the version of Windows XP that is installed on the computer.

How to uninstall XP SP2?

To do this, follow these steps: Click Start, click Run, type appwiz.cpl in the Open box, and then click OK . In the Currently installed programs list, click ...

How to remove Internet Explorer from Windows 10?

Click Start, click Run, type appwiz.cpl in the Open box, and then click OK. In the Currently installed programs list, click Internet Explorer 7 or click Internet Explorer 8, and then click. Remove. If Internet Explorer is not listed in the Currently installed programs list, follow these steps: Open a command prompt.

How to remove a program from Internet Explorer?

Click Start, click Run, type appwiz.cpl in the Open box, and then click OK. In the Currently installed programs list, click Windows Internet Explorer 7, or click Windows Internet Explorer 8, and then click. Remove.

Does Internet Explorer work after Windows XP repair?

If you do not uninstall the later version of Internet Explorer in this situation, Internet Explorer will no longer work after the repair installation of Windows XP is completed. Specifically, the repair installation does not restore earlier versions of the files in the Program FilesInternet Explorer folder. Therefore, the later version files ...

What is a repair install in Windows XP?

One of the features Windows XP introduced is the Repair Install option which in the event of a major PC crash allows you to keep your personal data while the core Windows files are replaced hopefully allowing the PC to get back up and running. A Repair install is not the same as a re-install or a clean/fresh install, a couple of other phrases you may have heard. A re-install usually means wiping the current operating system off and putting it on again, a clean/fresh install can also mean that but is more commonly used when Windows is being installed onto a drive or partition for the first time.

Why is my Windows XP repair not working?

One of the biggest causes of a Windows XP repair install failing to work properly is to do with which version of Internet Explorer you have installed. As all official XP CD’s have Internet Explorer 6 integrated by default, that’s what is re-installed when a repair is performed, or at least some of it does. If you have IE 7 or 8 still installed ...

How to boot from a CD in Windows XP?

2. A message “ Press any key to boot from CD or DVD ” will popup on the top left corner of your screen. Simply hit any key on your keyboard to boot from the Windows XP CD before the message disappears. 3. A blue screen will appear and begin loading Windows XP Setup from the CD, this could take a minute or more depending on the speed of your system.

How long does it take to install Windows XP SP2?

Installing windows XP SP2 takes about half an hour and even SP3 takes about 25 minutes (in an average computer). Here there won't be a reinstallation disk, but you will have the Windows Setup disk, which will have the reinstall command.

Does Dell XP need to be activated?

What's nice about the Dell XP CD is that it is tied to the BIOS and XP is pre-activated. There is never a need to activate Windows since it's already (and perpetually) activated. If your Dell XP CD is at the SP2 level, then you will need to install SP3 and then all the other post-SP3 security updates.

How to install Windows XP on a new computer?

1. Insert the Windows XP CD into your computer. If you no longer have a copy of the CD, contact your computer manufacturer for a replacement, or download an .iso from the internet that you can burn to a blank CD. Be aware of viruses, and know that you will still need to enter a valid Product Key to install.

Where is the Windows XP key?

It can usually be found in one of a couple different places: Attached to the case your Windows XP CD came in, usually on the back. Attached to your computer. If it is a desktop then it is usually located on the back of the tower. For a laptop, it is on the bottom.

How to install Windows XP on a blank CD?

Steps. Insert the Windows XP CD into your computer. If you no longer have a copy of the CD, contact your computer manufacturer for a replacement, or download an .iso from the internet that you can burn to a blank CD. Be aware of viruses, and know that you will still need to enter a valid Product Key to install.

How to reboot a computer in BIOS?

Once you are in the BIOS, navigate to the Boot menu. Set the 1st Boot Device as the CD drive. Depending on your BIOS and setup, this could also be called the DVD drive, the Optical drive, or CD/DVD drive. Save your changes and exit the BIOS. This will cause the computer to reboot. ...

How to know if my computer is not installed?

To see which devices are not installed properly, open the Start Menu and right-click My Computer. Select the Hardware Tab, and then click Device Manager. If there are devices with a yellow exclamation point, then they may need their drivers reinstalled.

How to authenticate Windows 10 after installation?

If you have an internet connection, then you should be able to authenticate your copy by clicking a button.