how to repair a big hole in the wall

Fix Large Holes

1. Cut Out a Piece of Drywall to Use as the Patch. Cut a piece of drywall into a square a little bit bigger than the hole.
2. Trace the Patch Size Over the Hole
3. Cut Out the Hole
4. Attach Furring Strips Inside the Hole
5. Attach the Patch to Furring Strips
6. Apply Joint Tape to the Patch
7. Apply Joint Compound. ...

Full Answer

How to quickly patch a hole in the wall?

UI Localization

• Fixed the “Kicked” dialogue popup displaying as “Banned” in Portuguese, sorry for scaring you! ...
• Fixed sizing on the how to build tip as it was being changed to the unintended size.
• Fixed navigation bar button text overlapping when multiple buttons are showing with long text.

More items...

How to patch any size hole in your wall?

Method 2 of 4: Fixing a Golfball Sized Hole in a Wall

1. Gather and purchase all the supplies and tools you will need. Get all of your tools and supplies together before you get started.
2. Apply fiberglass mesh tape or sheetrock tape over the hole. A piece of sheetrock tape soaked in water is cheapest but a patch sticks, flattens better, and is thinner.
3. Apply joint compound, also called 'mud', over the patch. ...

More items...

How to fill large hole in an internal wall?

Patching Large Holes

1. Square up the hole using a file, the edge of a screwdriver, or a drywall saw. ...
2. Provide a mounting support for your wall material by installing a cross beam behind the surface of the wall. ...
3. Cut your patch piece from a slab of sheetrock matching the depth of the existing wall.
4. Place the patch in the hole. ...

More items...

How to fix giant hole in wall?

How to Fix Large Holes Typically, a hole larger than 4 inches across needs to be patched with a new piece of drywall. Since you’ll have to cut into the wall in this process, make sure you know where your electrical wires and utilities are beforehand.

What can I use to fill a large hole in the wall?

Use the kit in 4 steps:First, hand-sand around the hole to smooth any rough spots. ... Then cut a piece of fiberglass mesh to overlap the hole by at least 1 in. ... Spread a layer of spackling compound over the patch with a 6-in. ... Let it dry overnight, sand lightly, then apply a second thin layer.

How do you fix a big hole in the wall with drywall?

2:286:57How to patch and repair drywall - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll have a rough edge around your cut the sand and wipe it down if there aren't studs behind yourMoreYou'll have a rough edge around your cut the sand and wipe it down if there aren't studs behind your hole attach a 1 by 4 inside your wall and screw your drywall patch to that.

How do you fix a large hole?

0:259:59How to Fix a Large Hole in the Wall -- by Home Repair Tutor - YouTubeYouTubeStart of suggested clipEnd of suggested clipEspecially. If you're in a tight space like me. So I needed to put those pieces of blocking. BackMoreEspecially. If you're in a tight space like me. So I needed to put those pieces of blocking. Back set them back about 3/4 of an inch. And also because of the tight. Space I had the angle.

How do you fix a big hole in a wall without drywall?

0:000:37How to Fix a Hole Without Drywall - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if you got a hole like this and you don't have a piece of drywall you can do it a coupleMoreSo if you got a hole like this and you don't have a piece of drywall you can do it a couple different ways you can pressure fit it or you can just put a nail on the side.

How big of a hole can you patch with drywall?

6 inchesFix Large Holes For holes larger than 6 inches, you'll create a drywall patch with a different attachment method for the repair.

What size hole is too big to patch?

Puncture repairs are limited to the crown area of the tire, which is the center of the tread approximately 1 to 1.5 inches in from each shoulder. Puncture repairs are also restricted by size and cannot be larger than 3/8 of an inch in diameter.

How big of a hole can you fill with joint compound?

Preparing the Drywall Area. Use spackle to repair holes less than 4 inches (10 cm) in diameter. Spackle can be used to repair holes up to the size of your hand. You will have to use a support like mesh or wire to repair holes larger than 4 inches (10 cm) in diameter.

What household items can I use to patch a large hole in the wall?

Squeeze a small amount of white toothpaste into the hole and smooth over the surface using a putty knife or index card. White bar soap can be used in a similar fashion. Dampen the bar of soap and rub it over the hole until it is filled. Use an index card to remove the excess material.

How do you patch a large hole in drywall without studs?

1:112:14Patching Holes in Drywall With No Anchor Points - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou also want to make sure that you countersink your screws in a little bit that way when you putMoreYou also want to make sure that you countersink your screws in a little bit that way when you put mud over the top it's going to cover up those holes you want to take your piece of drywall.

How much does it cost to repair a large hole in the wall?

The approximate cost to repair large holes is $50 to $75 per square foot. Additional tasks like removal and disposal of debris can increase the overall project rate. The average cost for removal of construction debris is $200, but this price may be lower for smaller jobs like this.

How do you make homemade wall filler?

That's right, hidden in your kitchen, you'll find a cheap way to repair your walls.Mix together four tablespoons of white flour and one-third teaspoon of salt, then add in enough paint or primer until the concoction has a doughy or putty-like texture.Smooth it over small cracks and dents with a putty knife.

How do you patch a large hole in drywall without studs?

1:112:14Patching Holes in Drywall With No Anchor Points - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou also want to make sure that you countersink your screws in a little bit that way when you putMoreYou also want to make sure that you countersink your screws in a little bit that way when you put mud over the top it's going to cover up those holes you want to take your piece of drywall.

How do you fix a big hole in drywall without a patch?

Spackle works great for holes that don't penetrate completely through the drywall, as its primary purpose is as a filler.With a small putty knife, apply spackling compound to dent or scratch.Scrape your knife lightly over the area until gap is filled and new spackle is smooth with the wall.More items...

What household items can I use to patch a large hole in the wall?

Squeeze a small amount of white toothpaste into the hole and smooth over the surface using a putty knife or index card. White bar soap can be used in a similar fashion. Dampen the bar of soap and rub it over the hole until it is filled. Use an index card to remove the excess material.

What kind of putty is used for drywall?

Joint compound, also called drywall compound, is a putty that has the consistency of plaster and is designed for larger jobs. Joint compound is made by mixing gypsum dust and water into a paste. It's usually comes in a pre-mixed container for your convenience and is commonly used for taping and finishing drywall seams.

How to make a ragged hole in a wall?

Start by cutting the ragged hole into a neat square or rectangle. Slip one of the 1x3s into the wall cavity and screw it to the edge of the cutout; be sure it overlaps into the hole by 1 1/4 in. Then attach the second 1x3 to the opposite side of the cutout.

How to hide joints in drywall?

Spread a thick coat of joint compound around the edges of the patch. Use the drywall knife to firmly press paper tape into the compound; this will hide the joints. After the compound has dried completely, sand it smooth and apply at least two more thin coats of compound.

Can you patch holes in drywall?

No matter how careful you are, live in a home long enough, and you'll find yourself with some holes in the walls to patch. And if a small section of wall is really badly stained or damaged, you'll have to cut out the affected area and cover the hole with a drywall patch.

How to fix a hole in a wall with cardboard?

Start by cutting a thick piece of cardboard into a square that’s slightly larger than the hole you aim to fix. Poke two small holes through the center of the cardboard cutout and thread a short string in through one hole and out through the other. Push the cardboard through the wall hole, keeping the string ends facing you and ensuring ...

How to make a wall with glue?

Use a toothpick to combine the two, then follow the steps below: Next, follow the steps below: Put on rubber gloves to be sure that this super-strength, fast-drying glue never comes in contact with your skin. Immediately apply the mixture directly to the wall. After it dries, start sanding the hard, plastic-like finish until it’s flush with ...

How to make a cardboard sanding board?

Push the cardboard through the wall hole, keeping the string ends facing you and ensuring that all corners sit behind intact drywall. Pull the strings tight to hold the cardboard in place. Mix together one tablespoon flour, one teaspoon salt, and a few drops of water to form a paste.

Is drywall indestructible?

Photo: fotosearch.com. While drywall is highly durable, it’s not indestructible. Over the years, interior walls take a beating, speckled with everything from nail nicks to doorknob dings. During your tenure as homeowner—or even as an apartment renter—you’re bound to end up with at least one unwanted hole in the wall.

How do I fix a hole in a wall?

If you need to fix a golf ball-sized hole in your wall, apply fiberglass mesh tape or damp sheetrock tape over the hole. Use a drywall knife to apply joint compound over the patch and smooth it out. Apply your patch to dry for 24 hours, then add another layer of joint compound and repeat as needed.

What do I need for a hole in a sheetrock wall?

For a large hole in a sheetrock wall you will need: A piece of sheetrock. Since you may only need a piece of sheetrock that is a few feet square, see if you or a friend has a piece of it lying around, instead of buying a whole sheet. However, most home improvement stores also sell smaller pieces of sheetrock.

How to get spackling paste off of wall?

Smooth the spackling paste out with your putty knife. The goal is to make the transition between the wall and the patch as seamless as possible. Using a damp cloth, wipe off any excess spackling paste that may have gotten on the wall around the hole.

What do I need to patch a hole in a golf ball?

Get all of your tools and supplies together before you get started. To patch a hole the size of a golf ball, you will need: Fiberglass mesh tape or sheetrock tape. A small amount of joint compound. A 4” drywall knife. 220 grit sandpaper. ...

Can you match texture with a stipple brush?

To texture patches, a stiff stipple brush will often do the trick, by sticking brush in plaster and stippling on finished and dry patch.

How big should a hole be for a patch?

If the hole is 4 inches square, then the patch should be 8 to 10 inches square.

How to make sure a patch fits?

To make sure the patch fits easily without forcing, mark the dimensions to be a little smaller than the opening in the wall. Use a straight edge to join the marks on the back of the patch with a pencil line creating a hash pattern. Score each line with a sharp utility knife going completely across the piece of drywall.

How to break down putty on wood lath?

With wood-lath plaster, tap inside the score lines with a hammer to break the putty along each line. Break the putty away from the lath and then use a small sharp handheld saw like a japan saw to gently cut the wood slats free.

How to get rid of ridges on a knife blade?

Ignore any ridges left by the edge of the knife blade. Let the mud set until hard and shave off any ridges in the surface using an upward stroke with the joint knife. Sand any other rough spots using medium sandpaper and wipe the dust away with a damp rag.

Need more help? Talk to a drywall repair expert

Our partners can help you compare quotes from top-rated professionals near you

Prepare the Opening

Trim the edges of the hole to create straight sides and a square or rectangular overall shape. Use a framing square and a pencil to mark cutting lines on the drywall. Then cut along the lines with a drywall saw.

Warning

Make sure there is no wiring or plumbing behind the drywall surface before cutting by looking through the hole with a flashlight.

Install the Backing Strips

Cut two pieces of lumber or plywood a few inches longer than the long sides of the hole (if it's a rectangle). Place one piece into the hole, parallel to one of the long sides, so the strip is centered over the drywall edge (half is behind the drywall and half is exposed).

Install the Drywall Patch

Cut a piece of drywall to fit the hole. It doesn't have to be a snug fit, but the seams should be not more than about 1/8 inch wide. Position the patch over the hole and secure it to the backing strips with screws. Keep the screws about 1 inch from the edges of the patch and space them 6 inches apart.

Tape the Seams

Cut strips to length of drywall joint tape using a utility knife. Cover each seam with a strip of joint tape. Overlap the tape strips at the corners. Make sure the tape lies flat, with no wrinkles or bulges.

Mud the Seams

Cover the drywall tape with a thin layer of drywall joint compound, using a 6-inch drywall knife. You should be able to see the mesh through the compound. Let the compound dry. Then scrape the surface with the knife to remove any burrs or clumps.

Small Dents and Dings

Scrape away loose debris from the hole. Cover the hole or dent with fast-drying spackle to bring the spackle level with the drywall surface and let it dry 24 hours -- or the time recommended by the manufacturer’s instructions. Sand smooth.

Popped Nail Heads

A popped nail isn't holding in the stud and backs out of the drywall, creating a popped nail head.

Small Holes

For small holes, like those created by a doorknob, a patch kit may be used.

Large Holes

For holes larger than 6 inches, you'll create a drywall patch with a different attachment method for the repair.

Corner Bead Patch

Corner bead is used where two pieces of drywall meet to form a corner. Corner bead is available in a variety of materials, including metal, paper and vinyl.

Finish the Repair

You're almost done. Here's where you make it look like nothing happened.

Repair Textured Drywall

Textured drywall is a bit more complicated, but still pretty simple to repair.