How to Repair a Bounce House
- Locate the Damage. First, you need to locate the damage to your bounce house. ...
- Clean the Area. Next, you need to clean the area so the adhesive can stick to the hole. ...
- Cut the Patch. Next, you’ll need to cut the patch to fit the size of the hole. ...
- Flatten the Area for Attachment. ...
- Add Glue. ...
- Seal the Damage. ...
- Conclusion. ...
- Clean the area to be patched.
- Cut the patch into the shape of a circle.
- Flatten the cut areas.
- Apply vinyl glue around the leak.
- Apply vinyl glue to the patch.
- Press the patch on and apply pressure.
- Check that edges are sealed.
Can my inflatable bounce house be repaired?
As your inflatable get usage, minor damages and tears may occur which will require repairs. If the damage to your inflatable is larger than 6 inches, we recommend having it repaired by a professional bounce house repair center. For smaller damages consider using one of the "Do-it-Yourself" inflatable repair kits listed below.
How do you fix a broken bounce house patch?
Check to make sure the edges of the patch are completely glued to the bounce house. If there are any pieces of the patch peeling away, put more glue and apply pressure until the patch is completely adhered to the bounce house. Let the glue dry for a couple hours before using the bounce house.
How to repair a bounce house netting?
Sewing a tear with the awl kit and then applying a patch is the most permanent professional bounce house patch repair that you can do. Fixing the netting on a bounce house in a professional way takes some time and involves some weaving skills.
How to find a leak in a bounce house?
Place your hand close to the bounce house as you walk around inspecting it. You will easily be able to feel large leaks this way. If you still can’t find the leak by feel, you’re going to have to coat the bounce house in soapy water. The leak will create bubbles when covered with soapy water.

What kind of glue do you use to patch a bounce house?
vinyl cementSimply apply the vinyl cement to the cleaned area on the unit and also on the secondary vinyl (patch or what you are gluing to the inflatable). The vinyl cement needs to dry for a couple of minutes to become tacky then apply together with pressure for a few minutes.
How do you repair a ripped seam on a bounce house?
0:101:48Repair Damaged Stitching using a Sewing Awl Kit: HOW TO | Magic ...YouTubeStart of suggested clipEnd of suggested clipArea. With your sewing awl kit push the needle through the vinyl and pull the end of the thread allMoreArea. With your sewing awl kit push the needle through the vinyl and pull the end of the thread all the way out. Pull out enough thread to cover the entire torn.
Can you patch a bounce house with duct tape?
Quickly fixing a hole in a bounce house If you own small bounce houses, then can instantly fix the hole by using some duct tape over the hole. You need to remember that this trick works only on small holes and not for large ones.
Can you use flex tape on a bounce house?
0:021:532018.10.14 - Using flex-seal tape to fix bouncy houses - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe just apply that right in there and it sticks all the time keeps all that air from coming out andMoreWe just apply that right in there and it sticks all the time keeps all that air from coming out and it's got a nice clean.
How do you fix a slip and slide tear?
After you have sewn your inflatable water slide, you need to patch the hole. Cut a patch that is at least ½ inch bigger than the tear, spread small amounts of glue around the square, and place the patch onto the glue to cover the tear. Then let the glue dry on the patch for at least 24 hours.
How do you seal a hole in an inflatable?
Use a marker pen and draw a small circle around the puncture site. What is this? Cut out a small strip of adhesive tape at the ready, so you can ask someone to pass it to you when you're ready to inflate the ring again. Blow up the inflatable again and quickly seal the puncture with the tape.
How do you patch an inflatable vinyl?
Patch It Up!Step 1: Drain The Water. ... Step 2: Cut The Patch. ... Step 3: Dry And Clean The Patch Area. ... Step 4: Inflate The Kiddie Pool. ... Step 5: Apply The Glue. ... Step 6: Apply Your Patch. ... Step 7: Let It Dry.
How do you find a leak in a bounce house?
0:044:31How to Check & Repair Air Leaks for your Inflatables - YouTubeYouTubeStart of suggested clipEnd of suggested clipFull of dish soap and water and then spray the entire piece down looking for bubbles.MoreFull of dish soap and water and then spray the entire piece down looking for bubbles.
How much heat can Flex Seal tape handle?
A: Flex Tape is best applied to surface temperatures from 20°F to 120°F. Flex Tape can withstand temperatures from -70°F to 200°F.
Can flex tape handle pressure?
A: Flex Seal will withstand normal hydrostatic water pressure such as rainwater, but it is not made to withstand extreme pressure.
How do you reseal a bouncy castle?
How to Carry Out Minor Cosmetic Repairs on your Bouncy Castles Deflate the unit. Throughly clean the area to be patched. Ensure the repair area is flat. Cut the patch (larger than the damaged area) with no sharp areas. ... Apply the glue to both patch and damaged area.More items...•
How do you repair vinyl inflatables?
2:554:18Best way to repair air leak in vinyl inflatables, like pool toys ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I laid the foam over the top of my repair. And then I came in with a set of wood clamps. AndMoreAnd I laid the foam over the top of my repair. And then I came in with a set of wood clamps. And clamped it super super tight. And let that sit overnight they're putting a lot of pressure onto.
How do you fix a broken stitch?
Repair a Torn Seam TutorialPrep the rip. Turn the garment inside out and pin the torn edges together. ... Stitch and seal edges. With a sewing needle and sewing thread tie a knot on doubled over thread. ... Finish edges. Seal the raw edges of the seam with a blanket stitch, or buttonhole stitch.
How do you find a leak in a bounce house?
0:044:31How to Check & Repair Air Leaks for your Inflatables - YouTubeYouTubeStart of suggested clipEnd of suggested clipFull of dish soap and water and then spray the entire piece down looking for bubbles.MoreFull of dish soap and water and then spray the entire piece down looking for bubbles.
What to use to make bubbles last longer?
If all else fails, you’re going to want to turn to soap and water. Some folks recommend mixing in some glycerin, which is useful for retaining the effectiveness of the bubbles you’re about to create - using a detergent helps to lower water’s surface tension, which in turn enables bubbles to last longer.
Can you use corn syrup in a bounce house?
You will want to properly clean your b ounce house if you’re going to add in a third party adjunct (ie - the glycerin, corn syrup, or other substitute).
How To Find A Hole In A Bounce House
It can be challenging, but it’s not impossible. First, ask yourself if there are any leaks or holes in the inflatable walls of the bouncy castle. If so, this could mean that air is escaping from someplace – and maybe even through a small opening where someone poked their finger though to create an escape route for themselves!
Quick (but Temporary) Repair A Hole In A Bounce House
Bounce houses are a great source of fun for kids, but they can be pretty expensive. Sometimes the inevitable happens and you have to patch up that hole in your bounce house left by mischievous children or an errant soccer ball. There’s no need to pay full price at the store when there is such a quick temporary fix!
How To Patch A Bounce House The Right Way
You may be wondering how you should go about repairing that tear in your child’s favorite inflatable.
Do I need to Patch Everywhere that I feel Air Coming Out?
Air can escape from a bounce house in many different areas. Some of the most common are at seams where two pieces of material meet and through zippers. To be safe, you should patch any holes on your inflatable before inflating it to make sure no air escapes indoors!
How To Fix A Net On A Bounce House
Fixing a net on your bounce house can be difficult and time-consuming. However, there are ways to help make it easier! First, find the top of the ladder where you plan to attach your netting. The best place is about 3 feet from one corner at an angle that’s perpendicular (at 90-degree angles) with respect to both corners.
How To Fix Bounce House Discoloration
The brilliant colors of a bounce house can fade after being exposed to the elements for too long.
How do I prevent rips and tears in my Bounce House?
Did you know that the best way to prevent rips and tears in your Bounce House is by making sure it’s properly inflated and that you don’t have any sharp objects like metal spikes or nails on the side of it? Sharp objects can get stuck inside the fabric, causing holes as large as a tennis ball!
How to Patch a Bounce House
If the material in your bounce house is torn, you can repair it with a patch. You can purchase a vinyl repair kit or use the one that came with your bounce house. A vinyl repair kit has patches made from tough material that can resist punctures and tears and an adhesive that will bond to the vinyl in your bounce house.
How to Sew a Bounce House
If your bounce house has visible cross-weaving that has become damaged, you can repair it yourself. You will just need rubbing alcohol, a strong needle, and a piece of heavy thread.
Order Bounce Houses from i2k
Renting inflatable bounce houses is an excellent way to earn extra money and have fun. If you know how to repair a bounce house yourself, you will be able to operate your business with very little downtime. i2k sells a variety of bounce houses with bright colors and fun themes that are popular with young children.
How big of a damage to an inflatable bounce house?
If the damage to your inflatable is larger than 6 inches, we recommend having it repaired by a professional bounce house repair center.
What is a Magic Jump Repair Kit?
Our Repair Kit provides a fast and easy solution for small cuts and punctures. Your order of a Magic Jump Repair Kit includes multi-colored vinyls and 8-ounce vinyl cement. Make sure to have this Repair Kit handy when accidents happen.
How to contact Magic Jump Inc?
website visitors. If you are a bouncer repair company and would like to be included in this list of inflatable repair centers, please contact us at 818.847.1313 or email us at [email protected].
