Repairing Guides

how to repair a bounce house tear

by Else Schimmel Published 3 years ago Updated 2 years ago
image

Bounce House Repair Methods

  • Tear Tape Repair. If you’re in the middle of a children’s party where every kid is enjoying the bouncy castle, you sure wouldn’t want to spoil the fun and have ...
  • Glue and Patches Repair. The use of glue and patch to repair ripped sections of the bouncy castle is another quick fix you can do.
  • Needle and Thread Repair. ...

If the material in your bounce house is torn, you can repair it with a patch. You can purchase a vinyl repair kit or use the one that came with your bounce house. A vinyl repair kit has patches made from tough material that can resist punctures and tears and an adhesive that will bond to the vinyl in your bounce house.Nov 14, 2017

Full Answer

How do you fix a broken bounce house patch?

Check to make sure the edges of the patch are completely glued to the bounce house. If there are any pieces of the patch peeling away, put more glue and apply pressure until the patch is completely adhered to the bounce house. Let the glue dry for a couple hours before using the bounce house.

How to repair a bounce house netting?

Sewing a tear with the awl kit and then applying a patch is the most permanent professional bounce house patch repair that you can do. Fixing the netting on a bounce house in a professional way takes some time and involves some weaving skills.

Will duct tape fix a leaking bounce house?

Duct tape may work decently on smaller bounce houses, but at best, it’s a very temporary fix. Another quick fix options is to get some Vinyl Repair Tape (link to Amazon) and tape over the leak with that. For us, this has had more success than a duct tape fix, but still is not a long term solution.

How to find a leak in a bounce house?

Place your hand close to the bounce house as you walk around inspecting it. You will easily be able to feel large leaks this way. If you still can’t find the leak by feel, you’re going to have to coat the bounce house in soapy water. The leak will create bubbles when covered with soapy water.

image

What kind of glue do you use to patch a bounce house?

vinyl cementSimply apply the vinyl cement to the cleaned area on the unit and also on the secondary vinyl (patch or what you are gluing to the inflatable). The vinyl cement needs to dry for a couple of minutes to become tacky then apply together with pressure for a few minutes.

Can you use flex tape on a bounce house?

0:021:532018.10.14 - Using flex-seal tape to fix bouncy houses - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe just apply that right in there and it sticks all the time keeps all that air from coming out andMoreWe just apply that right in there and it sticks all the time keeps all that air from coming out and it's got a nice clean.

How do you put patches on a bounce house?

1:322:48Patching inflatable bouncer - YouTubeYouTubeStart of suggested clipEnd of suggested clipAllow vinyl cement to dry until it fills dried to touch around one to two minutes place the patchMoreAllow vinyl cement to dry until it fills dried to touch around one to two minutes place the patch covering the damaged area and press with your palm for one.

How do you fix a slip and slide tear?

After you have sewn your inflatable water slide, you need to patch the hole. Cut a patch that is at least ½ inch bigger than the tear, spread small amounts of glue around the square, and place the patch onto the glue to cover the tear. Then let the glue dry on the patch for at least 24 hours.

How do you patch an inflatable vinyl?

Patch It Up!Step 1: Drain The Water. ... Step 2: Cut The Patch. ... Step 3: Dry And Clean The Patch Area. ... Step 4: Inflate The Kiddie Pool. ... Step 5: Apply The Glue. ... Step 6: Apply Your Patch. ... Step 7: Let It Dry.

How do you fix an inflatable seam?

2:013:55Invisible Seam Repair on an Inflatable Toy - YouTubeYouTubeStart of suggested clipEnd of suggested clipAround i push the vinyl of the toy down against the glue covered patch this squeezes out some of theMoreAround i push the vinyl of the toy down against the glue covered patch this squeezes out some of the vinyl cement. So i quickly reach for the paper towel to dab away the excess.

How do you sew a jumping house?

1:515:20How To Stitch And Patch A Cut On An Inflatable Bounce House - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith the knot underneath. You're going to go across from the hole you started on once you get itMoreWith the knot underneath. You're going to go across from the hole you started on once you get it underneath you're going to zigzag you can go diagonally to the other side. And come back up like that.

How do you put on a tear aid patch?

0:311:22How to Apply Type A Tear Aid - YouTubeYouTubeStart of suggested clipEnd of suggested clipApply the patch over the tear while applying pressure. And peeling the rest of the paper liner toMoreApply the patch over the tear while applying pressure. And peeling the rest of the paper liner to avoid air bubbles rub patch aggressively to ensure all edges are sealed.

How do you find holes in a bounce house?

0:021:16Life Hack: Easily find the leak in an inflatable object - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf an inflatable object is losing air and if it is losing air and you don't know from where how toMoreIf an inflatable object is losing air and if it is losing air and you don't know from where how to find the spot where it's losing air for this you will need a damp rag.

Can you sew inflatables?

Stitching or special repair patches fix damaged inflatables. The downside to inflatables is that they are prone to leaks, punctures or tears that render them unusable. Rather than discarding your favorite holiday inflatables, many of them can be patched with tape or a vinyl repair kit.

How do you patch an inflatable sled?

1:523:41How To Repair A Hole In Your Vinyl Tube | Sportsstuff WatersportsYouTubeStart of suggested clipEnd of suggested clipThe puncture pieces on the back of the cap. So you're just going to lightly puncture that make aMoreThe puncture pieces on the back of the cap. So you're just going to lightly puncture that make a little bit of a hole in there. And then you're going to apply the glue to the back of the patch.

How do you fix a hole in a jumping castle?

Take the bottom surface of the patch that will be glues and rough up the surface with the sand paper and the wipe clean. Repeat this process with the surface on the bouncy castle around the torn area. Using the brush apply the glue liberally to the whole of the patch and make sure it is right to the edge.

Can You Use Flex Seal on inflatables?

A: The Flex Seal Inflatable Patch and Repair is an easy to apply one-step solution consisting of self adhesive, strong, rubberized, crystal clear patches that are designed to instantly seal air leaks in all types of PVC plastic inflatables.

Can you put Flex Seal on a raft?

My friend has had great success with flex seal on the old raft I gave him. The raft had some pin hole leaks and seam issues (Earth brand raft). Two cans of Flex seal took care of the issues. I think flex seal will be good to reinforce wear spots.

Can You Use Flex Seal on a fiberglass boat?

Flex seal is advertised to adhere to fiberglass and aluminum, so you should have no problem with it sticking to your boat.

Is Flex Seal tape UV resistant?

Flex Tape's powerful adhesive bonds instantly sticks to almost any surface and actually gets stronger with time and pressure. Flex Tape has a thick, flexible rubberized backing that conforms to any shape and object. Flex Tape is UV resistant, VOC- free, and withstands extreme temperature and weather conditions.

How to Find the Hole in Your Bounce House

It’s not always an easy task to find smaller holes in the house. For your first attempt at finding one, run the blower so you can walk the perimeter and feel for any air escaping.

Step-by-Step Guide to Patch a Hole in Your Bounce House

Fix your bounce house properly by using a proper vinyl patch kit. It does take a little time to accomplish your task. However, the bit that takes the longest amount of time is finding the leak. Since you already found it using the above tips, you’re already about halfway to completing the job and getting back to sitting in the shade.

Quick Patch Options

If you’re short on time, then you can use one of two quick patch options:

Is the Tear at the Seam?

If you discover that stitching has become damaged or the tear causing the leak is on a seam, then you can consider sewing the seam. A quality sewing awl kit gives you everything you need to sew the seam.

When to Call in a Professional

If you’ve followed the step-by-step instructions, made your repairs, and the problem persists, then it’s a good idea to call an inflatable repair expert.

When to Replace Your Bounce House

If the air leak still persists after you’ve tried the patch kit and called in a professional, it may be time to invest in a new bounce house.

How to Prevent Vinyl Tears in the First Place

Now that you know how to patch and repair your bounce house, you might want to know how to prevent rips and tears in the first place.

How do I repair a bounce house?

There are three main ways to repair your bounce house: Apply a special elastic clear sticker over the rip that can be purchased online in a basic vinyl repair kit. Glue a patch of vinyl with rounded edges on top of the rip using a strong vinyl cement glue. Using a repair kit with the necessary materials, poke holes around the rip and sew ...

How to fix a tear in vinyl patch?

Clean the area with a fast-drying alcohol swab and make sure it is dry before putting on the glue. Brush on the vinyl cement glue onto both the tear and the vinyl patch. Press the two together keeping it as flat as possible. Use a towel so that the glue does not get on your hands. Try to remove any air pockets.

Do bounce houses have air pockets?

You bounce house will most likely always have air seeping through the seams and built-in pockets at the top for air to flow out . This is actually an amazing feature of your bounce house as the constant stream of air flow is what keeps it so strongly inflated while so many little bodies jump all over it.

Can mice get into a bounce house?

Make sure you have a thick bag protecting your bounce house and store it in a place where mice cannot get to it. -Don’t allow shoes or sharp objects on the bounce house. Hopefully, this is a common rule for your bounce house fun for the safety of the children, but it can also protect the bounce house as well.

Can duck tape be used on bounce houses?

It is not recommended to use Gorilla Tape or Duck Tape to repair a bounce house. Even if it is waterproof, these types of tape do not have much flexibility or elasticity to them so they will rub off and not last. They will also leave a sticky residue behind.

What to use to make bubbles last longer?

If all else fails, you’re going to want to turn to soap and water. Some folks recommend mixing in some glycerin, which is useful for retaining the effectiveness of the bubbles you’re about to create - using a detergent helps to lower water’s surface tension, which in turn enables bubbles to last longer.

How to get a patch to not stick?

First, make sure the patch is flat and not stuck to another piece of itself. After that, you have two choices . One, sit there and hold the pieces together for several minutes. Or two, find a heavy object and get it to do the job of maintaining an adequate amount of pressure on the patch site. Your choice.

Can you use corn syrup in a bounce house?

You will want to properly clean your b ounce house if you’re going to add in a third party adjunct (ie - the glycerin, corn syrup, or other substitute).

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9