Reinflate the bounce and identify the leak. If it's a major tear, fold up the bounce and send it away for professional repairs. If it is a minor tear, an easy-to-use repair kit with transparent patches will allow you to repair the faulty seam within minutes.
How to fix a torn bouncy castle?
Repeat this process with the surface on the bouncy castle around the torn area. Using the brush apply the glue liberally to the whole of the patch and make sure it is right to the edge. Brush the glue also onto the section of the inflatable where the patch will be placed.
How do you fix a broken bounce house?
If the tear is along a seam, or damage to the stitching, you will need to re-stitch with a sewing awl. There’s specific steps to follow to patch the bounce house the right way, as well as levels of repair, such as a quick fix, permanent fix, and professional fix.
How do you fix a leaking inflatable bounce?
Fix a leak in an inflatable bounce with a vinyl repair kit. Inflatable bounces, such as bounce houses, are a source of entertainment for children ranging from toddlers to teens. Unfortunately, with boisterous play, the seams sometimes spring a leak, and this causes the device to slowly collapse.
How do you fix a leaky bounce on a vinyl siding?
Brush soapy water onto the suspect areas with a 1/2-inch paintbrush and watch for bubbles. Measure the length of the leak with a ruler and mark the area with an erasable grease pencil before deflating the bounce. Cut an oblong transparent vinyl patch big enough to overlap the seam by an inch on all sides.
How do you fix an inflatable seam?
2:013:55Invisible Seam Repair on an Inflatable Toy - YouTubeYouTubeStart of suggested clipEnd of suggested clipAround i push the vinyl of the toy down against the glue covered patch this squeezes out some of theMoreAround i push the vinyl of the toy down against the glue covered patch this squeezes out some of the vinyl cement. So i quickly reach for the paper towel to dab away the excess.
Can you sew a bouncy castle?
Sewing over existing PVC is not possible and as such we have to sew narrower and around the damaged areas, This gives unpredictable results and inevitably the inflatable will get smaller and smaller and curve, distort and lift in certain areas where it didn't.
How do you fix a leaky seam in a bounce house?
Steps To Apply A Bounce House Patch:Clean the area to be patched.Cut the patch into the shape of a circle.Flatten the cut areas.Apply vinyl glue around the leak.Apply vinyl glue to the patch.Press the patch on and apply pressure.Check that edges are sealed.
What kind of glue do you use to patch a bounce house?
vinyl cementSimply apply the vinyl cement to the cleaned area on the unit and also on the secondary vinyl (patch or what you are gluing to the inflatable). The vinyl cement needs to dry for a couple of minutes to become tacky then apply together with pressure for a few minutes.
Can you sew inflatables?
Stitching or special repair patches fix damaged inflatables. The downside to inflatables is that they are prone to leaks, punctures or tears that render them unusable. Rather than discarding your favorite holiday inflatables, many of them can be patched with tape or a vinyl repair kit.
How does a stitching awl work?
0:413:13Using the Speedy Stitcher Sewing Awl - YouTubeYouTubeStart of suggested clipEnd of suggested clipHold the thread ends taut. And pull applying equal pressure forming a lock stitch. The stitch knotMoreHold the thread ends taut. And pull applying equal pressure forming a lock stitch. The stitch knot should be buried between the fabric.
Can You Use Flex Seal on inflatables?
A: The Flex Seal Inflatable Patch and Repair is an easy to apply one-step solution consisting of self adhesive, strong, rubberized, crystal clear patches that are designed to instantly seal air leaks in all types of PVC plastic inflatables.
How do you reseal a bouncy castle?
How to Carry Out Minor Cosmetic Repairs on your Bouncy Castles Deflate the unit. Throughly clean the area to be patched. Ensure the repair area is flat. Cut the patch (larger than the damaged area) with no sharp areas. ... Apply the glue to both patch and damaged area.More items...•
Can you patch a bounce house with duct tape?
Quickly fixing a hole in a bounce house If you own small bounce houses, then can instantly fix the hole by using some duct tape over the hole. You need to remember that this trick works only on small holes and not for large ones.
Can you use epoxy on inflatables?
3:304:16How To: Inflatable Repair Adhesives Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll want to use G flex epoxy G flex is a very strong and flexible epoxy that will stick to justMoreYou'll want to use G flex epoxy G flex is a very strong and flexible epoxy that will stick to just about anything as long as the surfaces are prepared properly.
How do you patch an inflatable vinyl?
Patch It Up!Step 1: Drain The Water. ... Step 2: Cut The Patch. ... Step 3: Dry And Clean The Patch Area. ... Step 4: Inflate The Kiddie Pool. ... Step 5: Apply The Glue. ... Step 6: Apply Your Patch. ... Step 7: Let It Dry.
What material is a bouncy castle made from?
Construction. The surfaces are typically composed of thick, strong PVC or vinyl and nylon, and the castle is inflated using an electric or petrol-powered blower.
How do you manufacture inflatables?
0:262:50How It's Made - EZ Inflatables - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter the designs are finished they're sent here to the cutting floor this is where easy inflatablesMoreAfter the designs are finished they're sent here to the cutting floor this is where easy inflatables uses their auto metrics technology to cut the pieces of the inflatables out of the vinyl.
How do they make bouncy castles?
4:195:25How Bouncy Castles Are Made - Part 1 - YouTubeYouTubeStart of suggested clipEnd of suggested clipNot not put in a material through skew with really nice farmyard bull pole being printed off theMoreNot not put in a material through skew with really nice farmyard bull pole being printed off the laminated ear. For for bouncy castle hire back sleep for her owner.
How inflatable castles are made?
Each wall and base is individually stitched by hand with each different colour panel being stitched together to make a wall, floor and roof and then the larger pieces are stitched together so the wall has a top and inside and outside and the bottom.
How to make soapy water for bounce houses?
1 Tbsp glycerin. 1 Gallon of water. Combine, shake, and use to coat the bounce house a couple square feet at a time. I’ve done this without the glycerin, just using soap and water, and was able to locate a small leak.
Why do bounce houses have zippers?
This is the best place to apply the patch because the pressure when inflated will be pushing the patch more into place , rather than the air pressure pushing the patch outwards.
How to find a leak in a sandbox?
Ways To Find A Leak: 1 Feel for air escaping 2 Submerge in water (only viable for small models) 3 Coat with soapy water 4 Listen for air escaping
What can prevent a patch from sticking?
Dirt and debris can prevent the patch from sticking properly. Make sure the area you will be applying the patch is free from water, grease, dirt, and any other debris.
Can you put duct tape over a bounce house leak?
I know you’ve thought about just putting some duct tape over the leak and calling it good. Well, I’ve done that before and it doesn’t work very well. Duct tape may work decently on smaller bounce houses, but at best, it’s a very temporary fix.
Can you throw away a bounce house?
There’s no reason to throw the bounce house away when this happens, many bounce house repairs are really straight forward. To patch a bounce house, you will need to cut a round patch from a patch kit and apply to the damaged area with vinyl cement or patch glue. If possible, patch the tear from the inside of the bounce house.
Do you need a patch kit for a bounce house?
Most patch kits made specifically for bounce houses will come with some vinyl glue to apply the patch, if yours doesn’t , you will need some vinyl glue as well.
How to fix a bounce?
of dishwashing liquid. Inflate the faulty bounce. Brush soapy water onto the suspect areas with a 1/2-inch paintbrush and watch for bubbles. Measure the length of the leak with a ruler and mark the area with an erasable grease pencil before deflating the bounce.
How to repair a patch on a vinyl wall?
Spread a liberal amount of vinyl repair adhesive onto the patch area with the brush provided in the kit. Position the bottom of the patch an inch below the seam. Hold the rest of the patch away from the adhesive with one hand and carefully smooth it flat with the palm of your other hand to remove any creases and air bubbles. Work as fast as you can because vinyl adhesive dries quickly.
What to use to make bubbles last longer?
If all else fails, you’re going to want to turn to soap and water. Some folks recommend mixing in some glycerin, which is useful for retaining the effectiveness of the bubbles you’re about to create - using a detergent helps to lower water’s surface tension, which in turn enables bubbles to last longer.
How to get a patch to not stick?
First, make sure the patch is flat and not stuck to another piece of itself. After that, you have two choices . One, sit there and hold the pieces together for several minutes. Or two, find a heavy object and get it to do the job of maintaining an adequate amount of pressure on the patch site. Your choice.
Can you use corn syrup in a bounce house?
You will want to properly clean your b ounce house if you’re going to add in a third party adjunct (ie - the glycerin, corn syrup, or other substitute).
Question: Resealing a Canvas Bounce House?
Does anyone know where I can get a canvas bounce house resealed? Since mine got soaked in a rain storm, it now is leaking air when I try to inflate it.
Question: Repairing an Inflatable Castle Bouncer?
I need to repair and clean an inflatable bouncer in Illinois. Where can I go?
Archive: Repairing an Inflatable Castle Bouncer
My kids received an inflatable castle bouncer for Christmas. They love that thing, but one of the seams has begun splitting and that part has deflated. Anyone know what might fix it?
