Raise the flagpole without the flag attached and hose it off with water. Add 1 tbsp. of liquid detergent to a bucket of cold water. Lay the flagpole on its side and rub it with a rag dipped in the soapy solution. Dirt and grime buildup is a common reason for the telescoping mechanisms to stick and be difficult to operate.
Full Answer
What is a replacement section for a flagpole?
This is the replacement section for the top of the flagpole. These pole sections are a direct replacement for our 20' Sectional Flagpoles. If your pole was damaged in some way, this will enable to you to get your pole back in working order! These sections are sold individually.
What to do if your flagpole Topper is damaged?
The most common are a star (in the Navy), gold ball, acorn, lance, spear, and eagle figurine. A damaged flag pole topper may not compromise your flagpole’s functioning, but it looks untidy. Replace it as soon as possible to keep your flag flying with respect.
Why do I need to clean my flagpole?
A problem can occur when the paint or anodized pole is damaged due to objects that scrape the protective barrier from the pole. When any of these conditions occur, it will be necessary to take additional steps to clean your flagpole to keep it looking beautiful.
What do you put on top of a flagpole?
There are no official flag pole topper rules, but they are usually tasteful patriotic decorations. The most common are a star (in the Navy), gold ball, acorn, lance, spear, and eagle figurine. A damaged flag pole topper may not compromise your flagpole’s functioning, but it looks untidy.
How do you fix a flag pole?
0:422:19How to Replace the Rope on Your Flagpole - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne end of the bent paperclip into the old Howard. And the other end into the new Howard fold bothMoreOne end of the bent paperclip into the old Howard. And the other end into the new Howard fold both ends of the paper clip together and then wrap it together with the tape.
How do you reinforce an aluminum flagpole?
0:424:50Flagpole STRENGTHENING diy! - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first thing you're gonna need is two ten-foot sticks of one on one quarter inch schedule 40 PVCMoreThe first thing you're gonna need is two ten-foot sticks of one on one quarter inch schedule 40 PVC pipe. And a coupler basically you'll put those two pieces together full length coupled.
How do you fix a telescoping flag pole?
Use a rag to rub light lubricating oil over all moving parts of the flagpole to remedy sticking and jamming. Pay special attention to the locking buttons on the individual sections of the telescope, which are especially prone to sticking.
Is 16 gauge aluminum strong enough for a flag pole?
Sturdy and Durable:This aluminum flagpole upgraded with 1.2mm aluminum 16 Gauge tube that is durable, rust-proof and strong enough to withstand high winds and harsh weather for outdoor using. PVC sleeve for sticking the pole into the ground make the bottom stable and wind-resistant.
How deep should a 20 foot flag pole be in the ground?
Prepare the Ground These can be rented. Make sure the hole is at least 2 feet deep and four to six times the diameter of the pole to accommodate the ground sleeve.
Should a flag pole sway in the wind?
Flagpoles are made to sway, but a flagpole that bends can't be fixed. We use sand within the sleeve to allow the flagpole to have wiggle room. The flagpole is going to move, they are too tall and lean of structures not to have movement.
Can a flagpole break?
The pole could break, but the more common failure is with the hardware that retains, raises, and lowers the flag. This will often cause the flag to fly too low, lose attachment at one of the clips, or allow it to fly off completely.
How do you keep a telescoping flag pole from collapsing?
Use a 1/4 inch drill bit to drill into the bottom of the 2nd, 3rd, and 4th from the bottom sections of the flag pole. These pins are used to ensure that the flagpole does not collapse.
Is sectional or telescoping flagpole better?
One-piece flagpoles tend to be stronger than some sectional or telescoping poles, and may be more suitable for high wind zone areas. Sectional flagpoles are constructed in sections that fit together, but have a seamless look. Telescoping poles feature sections that are held in place by an interlocking sleeve system.
What does a black flagpole mean?
give no quarterIn general, black flags are used by enemy forces to signify that enemy combatants are going to be killed rather than taken prisoner—essentially, the opposite of the white flag used to represent surrender. This is also sometimes referred to as “give no quarter.”
What gauge aluminum is best for flag pole?
11 Gauge Aluminum Sectional Flagpole All sectional flagpoles are a 2.0" diameter tubes and made with high quality, high strength, 7000-T8 series aluminum.
Which is better aluminum or fiberglass flagpoles?
Generally, fiberglass can handle a much higher wind load and is often used near high wind locations and near the ocean. Aluminum poles are more substantial looking metal poles, and are frequently used for commercial applications.
How much cement do I need for a flag pole?
After you purchase a trusted flagpole, such as the Titan Telescoping Flagpole kit, you just need the right utensils to get the job done. As far as materials go, you will need up to 240 pounds worth of pre-mix concrete, 15 to 20 pounds of pea gravel, and water.
How do you straighten a leaning flagpole?
Straightening your flagpole. Wood wedges are then placed between the flagpole and the sleeve so the installer can begin to realign the flagpole. The installer will adjust the wood wedges until the flagpole is realigned and is standing straight.
How do you keep a flag pole straight?
0:292:30Flag Pole Installation | United States Flag Store - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace the ground sleeve upright in the center of the hole. And use a level to ensure it's straightMorePlace the ground sleeve upright in the center of the hole. And use a level to ensure it's straight then surround it with concrete.
What size galvanized pipe for a flag pole?
Your 2-inch galvanized iron pipe will easily support a 5-by-8-foot flag in a high wind. It is very important to install the base of the pipe in a solid foundation. The 2-inch iron pipe needs to slide into a pipe sleeve that has an inner diameter slightly larger than the outer diameter of the flagpole.
Why does my flag pole holder break?
If the flag pole holder has broken, examine it to see if it is reparable. These pieces usually only break because of excessive loading.
How to release a section of a pole?
If the section is between 2 other sections, first release it from the lower section and then release the upper sections from it. Do not do this with any other form of locking system.
How to cut a broken section off?
To do this, use a hack saw and then use a fine glass paper to smooth the cut end and remove any burrs. Move the locking ring onto the undamaged part of the section before cutting.
What to do if a repair is not carried out?
If the repair can not be carried out or is unsatisfactory, you will have to buy a replacement section from the manufacturer or store. Fit it according to the instructions..
Can a flag pole be repaired?
You might find that your pole can not be repaired and must be returned to the factory. This repair will usually include a check of the rest of the flag pole and be well worth the extra cost and wait.
Can you repair a telescoping flag pole?
Repairing a broken or damaged flagpole can be a challenge. If your flag pole breaks as the result of normal use within the period of the warranty, do not attempt to repair it yourself.
How to Repair your Flagpole
Our flag poles work hard through rain and wind, sleet and snow, so sometimes after years of wear and tear the interlocking sleeve will need to be replaced.
Step 2
Gently remove screws from top ring; remove cap from top of pole; then remove the harnesses (they will slide off at this point)
Step 5
Alternatively – push the pole sections from the top and they will push out the insert
Step 6
Push the pole sections down from the top until the locking mechanism is exposed
Step 7
With both flat head and star head screwdrivers, simultaneously and gently remove the post fasteners at base
Step 8 & 9
At the top of the removed section of pole, push the pins in and pull out the top of the interlocking sleeve
What to do if flagpole is broken?
If broken flagpole parts are keeping you from showing the proper respect to the Stars and Stripes, it’s time for them to be replaced.
When Should I Replace Flagpole Parts?
If you haven’t brushed up on your flag flying etiquette lately, remember that as the flag owner, it’s up to you to make sure that the flag is never disrespected. That means never allowing it to fall to the ground or fly when it looks tattered.
What are the flag pole topper rules?
There are no official flag pole topper rules, but they are usually tasteful patriotic decorations. The most common are a star (in the Navy), gold ball, acorn, lance, spear, and eagle figurine.
What clips fit around the top of a telescoping flagpole?
This advantage comes with the telescoping flagpole’s unique hardware system. Swivel ring clips fit around the top of the flagpole and attach to the flag.
Why is my flagpole stuck in the extended position?
If the locks break, your flagpole may collapse back in on itself. On the other hand, grit or corrosion inside the telescoping sections can cause your flagpole to get stuck in the extended position.
What happens if a swivel ring stops working?
If your swivel ring clips stop working, your flag will get stuck flying in one direction, which can cause it to get wrapped around the flagpole. If this happens, replacing these clips are easy! All parts needed are available on the Flagpole Farm Website.
How many Americans display their flag?
62% of Americans display their country’s flag. Are you ready to become one of them? If so, you’ll want to know what kind of maintenance your flagpole will need. Thankfully, telescoping flagpoles are easier to install and have fewer flagpole replacement parts than traditional flagpoles. In this article, we’ll explain the components of telescoping flagpoles and the replacement parts you’ll need.
Special offers and product promotions
Amazon Business: Make the most of your Amazon Business account with exclusive tools and savings. Login now
Product description
These are replacement sections for our 20' Sectional Flagpole. Also fits Valley Forge Brand flagpoles #AFP20 or #AFP20F The sections measure approx. 56" in length and are 2" in diameter.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
How to remove black discoloration from flagpole?
To remove pitting, use a 400-grit sandpaper to sand the pitted areas smooth. Rinse the smoothed area with water and allow to dry. To remove discoloration, you can clean the pole with a mixture of soap and water with an acidic household product such as lemon juice or vinegar added.
Why are flagpoles not oxidized?
Anodized and painted flagpoles will not experience oxidization because there is a durable protective barrier between the pole and the outside elements. A problem can occur when the paint or anodized pole is damaged due to objects that scrape the protective barrier from the pole.
What to use to clean aluminum poles?
Once your pole is clean, you should apply a quality aluminum polish to the surface and then apply a new protective coating. Clear lacquer, car wax, or beeswax work well. Flagpole Cleaning Assistance In addition to mild soap and water, there are commercial cleaners designed to clean aluminum poles that are available.
How to contact Flagpoles Etc?
Flagpoles Etc. would be happy to answer any questions you may have about cleaning your flagpole. Contact us at 888-735-5591 or click on the Contact Us link at the top of this page. Please Like, Follow and Comment on Facebook, Follow us on Twitter, and join us on Linkedin and Google+ for special promotional offers. We look forward to hearing from you!
Can you use solvents on flag poles?
If tar or resin is stuck to the pole, you may use a solvent that is made to remove that substance. When using solvents on a painted flagpole, always apply a small amount in an unobtrusive place such as the base of the pole below the ground, to ensure that it will not damage the paint.
Is aluminum flagpole maintenance free?
May 14th, 2015. Although aluminum flagpoles are almost maintenance free and rain will generally wash it clean, any outdoor object will experience a buildup of gunk such as dirt, grass and other debris over time.
