How Do I Fix an Electric Dog Fence?
- Any Broken Panels Should Be Removed. Fence panels operate like wooden sails in heavy winds, putting strain on the...
- Get Rid of The Fence Post. As a dentist would with a problematic tooth, remove the buckled post. Before lifting the...
- Remove the Wire’s Protective Coating to Reveal The Copper Core. Make sure your dog is not...
How to find a break in an electric dog fence?
How to Find a Break in an Invisible Dog Fence
- Verify the Break. First thing to do is make sure that you do indeed have a break. ...
- Materials. To start, you'll need to round up a handheld AM radio and a RF choke (Radioshack part number 273-102 ).
- Connect the Choke. ...
- Tune In. ...
- Find the Break. ...
- Dig It. ...
- Check the Break. ...
- Mending the Break. ...
Can you install your own electric dog fence?
While it is nice to have someone install for you, you likely wonder, “Can’t I install my own electric dog fence?” For most people, the answer is yes. If you have looked into the option of traditional fencing, you likely found out that costs just as much. The bottom line is that installing your own electric dog fence can save you big bucks.
How to detect a break in an electric dog fence?
Note: you may have more than one break - so if you make a temporary repair - keep going.
- Note that you can only use the physical check to find a broken wire in your dog fence if the wires are not buried underground. ...
- Begin your visual check at the transmitter, where you first see the wire above ground.
- Walk around the dog fence wire, give it a tug, see if it has tension or if it is loose.
How much does an electric pet fence cost?
This is most times because of the quality of the material the product is made with or the popularity of the brand. But to purchase an electric dog fence, its price per foot ranges from $15 to $50. It can also be gotten at an average total cost ranging from $850 to $1500.
Can you splice electric dog fence wire?
When splicing the dog fence wire, all you need to do is twist the two exposed ends together, insert them into the gel-filled capsule and close the splice lock. The cylinder of the underground wire splice contains a mixture of silicone and grease, which helps to secure the waterproof connection.
How do you fix a broken invisible fence?
0:292:40Fixing a Break in Your Invisible Fence wire - YouTubeYouTubeStart of suggested clipEnd of suggested clipI simply match up the ends. Put a wire nut on in the traditional. Manner screw it down to where it'sMoreI simply match up the ends. Put a wire nut on in the traditional. Manner screw it down to where it's snug and tighten both wires can't be pulled out.
How do you splice a broken electric fence wire?
1:014:26Splicing a Broken Electric Fence Line || Simple FIX - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure we twist both wires not just one just twist one around the other it cools out real easyMoreMake sure we twist both wires not just one just twist one around the other it cools out real easy and even this can pull out. We can just take the back piece.
How do I find a break in my electric dog fence?
Begin to follow the twisted wire with the radio towards the main dog fence loop. You will begin to hear a combination of two sounds as you follow the twisted wire. Should there be a break in the twisted wire, the sound will slowly switch from two sounds to one sound.
What kind of wire is used for electric dog fence?
Electric dog fences usually come with 20-gauge (thinnest), 18-gauge, 16-gauge, or 14-gauge (thickest) wire. The 20-gauge wire with a vinyl coating is what you will find in most pre-packaged do-it-yourself fencing kits. Most professionally installed systems use the more substantial 14, 16 or 18 gauge wire.
Why is my electric dog fence not working?
If your Invisible Fence control panel is beeping with a lengthy pause between each beep, it's possible your backup battery unit needs to be replaced. Your fence will still work, but if your power goes out, the system will no longer be operational until power is restored.
Can you join electric fence wire?
Tie and join your polywire, braid or tape Take both ends of the break in your electric fence wire or tape and tie them together as securely as you can, leaving just over an inch or about 4 centimetres of excess wire or tape on both sides.
How do you connect two strands of electric fence?
0:585:53Multistrand Garden Fence - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake my braided cord. Run it through. And then tie it off with a square knot.MoreTake my braided cord. Run it through. And then tie it off with a square knot.
How do you join wire mesh together?
0:152:47HOW TO Splice Woven Wire Fence - With Just Pliers - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter you have the first vertical wire on both sides. Cut you're going to pull off these littleMoreAfter you have the first vertical wire on both sides. Cut you're going to pull off these little vertical wire sections.
How do you find a partial break in an invisible fence?
Plug in the Fence Transmitter and check the Loop Indicator Light. If the Loop Indicator Light is on you can assume the break is in the other half of the Boundary Wire. If the Loop Indicator Light did not come on and you hear a continuous beep, you may assume there is a break in this portion of the Boundary Wire.
How do you find break in petsafe wire?
Locate the break Strip 3/8 inch off the ends the wires, then insert and twist the stripped test wire with one of the stripped boundary wires into the wire cap. Plug in the base unit and check the loop indicator light. ON: The break is likely in the other half of the boundary wire.
How do you find a break in a wire?
0:121:10How to find break, opens and shorts in wires - YouTubeYouTubeStart of suggested clipEnd of suggested clipUntil you find a signal strength indication of 50 to 75 percent this indicates the position of theMoreUntil you find a signal strength indication of 50 to 75 percent this indicates the position of the wire trace. The wire until the signal stops. This indicates a break in the wire.
How do I fix my PetSafe wireless fence?
How do I reset my PetSafe wireless collar? Simply remove the battery and hold down the power button for a few seconds after the LED indicator has gone out. Then, replace the battery, with a fresh one if need be, and turn the collar on again.
How do you tie an electric fence together?
Tie and join your polywire, braid or tape Take both ends of the break in your electric fence wire or tape and tie them together as securely as you can, leaving just over an inch or about 4 centimetres of excess wire or tape on both sides.
How do you break an electric fence?
This can be done by attaching the fence to a metal stake by using wire. They will continually short-circuit the fence until the owner turns off the fence suspecting a fault. This is when the criminals can bypass the system. Criminals simply break the electric fence as a method of gaining entry.
How do you find a break in an underground dog fence with an AM radio?
4:4010:01EASILY find the break and fix your underground fence/invisible fenceYouTubeStart of suggested clipEnd of suggested clipSo what we're going to do is we're going to use an am radio this one's fm nam. And we're going toMoreSo what we're going to do is we're going to use an am radio this one's fm nam. And we're going to get it to recognize a sound for the system by tuning it to a similar frequency.
How do you repair a broken invisible fence?
It depends on what part of the fence is broken. If the wire is broken, it's actually fairly easy to fix the problem. First, bring your pets inside...
Can invisible fence wire be repaired?
Invisible fence wire can be repaired. This is routinely done by invisible fence installers and the process is actually fairly easy for anyone who h...
Can you splice invisible fence wire?
Yes, you can fix an invisible fence by splicing in an unbroken wire. In fact, there are many invisible fence companies that sell invisible fence wi...
Why is my invisible fence unit beeping?
The most common reason why an invisible fence transmitter unit will be beeping is that there is a break somewhere in the wire. While there are some...
What to do if dog fence wire is too short?
If the wire is too short to re-join, you can use your test wire to make the connection. Once you are sure that the dog fence wire is operating correctly, return it back to the area where it’s supposed to be.
How do I find a Break in my Invisible Dog Fence Wire?
This review shows a series of steps to help you locate the break in the wire and perform the repair. Click on the button below for our step by step guide on Finding a Break in your Electric Dog Fence Wire.
How to strip HDPE wires?
Using a wire stripper or your handy pliers gently crimp around the HDPE coating of the wires you are connecting and very gently strip off the housing .
Why is my dog fence not working?
If the Dog Fence Wire you're using for your Dog Fence is of low quality and breaks, your Dog Fence will stop working and your dog can escape putting him in danger.
What to do if you get another break in a wire?
If you ever get another break you need a slack in the system, so what we do to ensure that we have enough wire if ever there will be a breakage is fold over the pair of wires we made, then get just a piece of the wire and fold it back again, use the PVC tape again to hold our wires together and now it will look straight and we have a slack in the system for future use
Can you leave dog wire hanging on a fence?
Our Top Rated Dog Fence Wire is so durable you can even leave it hanging on the fence, lay it on the ground, cover it with mulch, bury it around your lawn or tunnel it under a concrete driveway.
Do you have to bury wire?
There is no need to bury our wire - just leave it sitting on the fence with a few precautions built-in to ensure it does not break.
What to do when your dog breaks a wire?
The most important thing you can do when you find out about a wire break is to bring your dogs back to a safe place. While there are definitely many dogs who are well-trained enough that they won’t try to cross the boundary lines even when the system is off, it’s always smarter to keep your pet as safe as possible.
What kind of jobs can break a fence wire?
So, what kind of jobs can break a fence wire? Aeration is a big culprit, as is tree removal. Edging your lawn can cause problems if your wires are above ground, though, as can shoveling snow. Bigger projects like installing sprinkler systems or building a deck can also cause issues, so make sure that you inform anyone who is working on your lawn as to where those wires can be found.
Why does my invisible fence beep?
The most common reason why an invisible fence transmitter unit will be beeping is that there is a break somewhere in the wire. While there are some modern units that will actually inform you about this through text, a simple alarm is still the most common way to alert a fence owner. It’s a good idea to familiarize yourself with the owner’s manual of your invisible fence, though, as some units have multiple types of alarms, and knowing exactly what sounds your transmitter is making or what color lights are flashing can tell you a fair bit about what problem you are facing.
How to walk around an invisible fence?
Once you have an idea of where the wire is located, keeping walking along a straight line until you no longer get a signal. Drop a flag at that point, and then walk in another direction to see if you get a signal from the receiver. You can follow this same process to walk out the length of your invisible fence and mark out exactly where it is located. If you don’t want to leave your markers permanently, make sure that you do this job every time you know someone is going to be working anywhere near the wires to prevent unwanted breakages.
What to do if you can't see a wire break?
If you can’t visually locate the wire break, you’ll need to buy an underground wire locator tool. These tools are very easy to use and can be bought both online and at big box hardware stores, so don’t be afraid to make a purchase. The good news is that you will probably get a lot of use out of this tool over the years.
Can you patch an invisible fence?
Once you find the place where the wire has broken , you’ll need to splice in the right kind of wire to repair the break. It’s generally recommended that you use a 16-gauge wire for this task, specifically one that’s rated to be buried underground and that’s waterproof. You may actually be able to pick up a patch kit from your invisible fence dealer , but even if you can’t you can purchase the wire on your own and create your own splice.
Where do wire breaks occur?
The good news is that some of the wire breaks that occur are fairly easy to spot. Breaks might occur near a driveway or sidewalk, for example, and you’ll be able to spot them right away. The bad news, though, is that most breaks aren’t going to be nearly as easy to spot. You’ll need to look around your property for areas that might be problem spots – gardens are a good culprit, as are any areas where you know animals dig. Check around trees as well, as growing roots can cause problems.
How to fix twisted wire on dog fence?
If your twisted wire was broken and you repaired or replaced it, temporarily connect the twisted wire ack to the main loop. Go to your dog fence transmitter box and test for continuity. If your main dog fence perimeter tests well, permanently repair or replace only the twisted wire. There isn’t a need to look further.
How do you know if your dog fence wire is broken?
If a wire should break, your transmitter box will let you know by incessantly beeping and flashing. You may also notice that your receiver collars are no longer reacting when you approach the wire.
How to find a wire break in a transmitter?
Next, disconnect your wires from your transmitter and replace them with the choke-one end of the choke in each lead on the control box.
How to power up a twisted wire?
Should you run into interference issues, disconnect your twisted wire from the main loop and connect both ends of the main loop to your sending unit. You will have to run an extension cord to your main loop in order to power it up.
How to hear a dog fence?
Begin to follow the twisted wire with the radio towards the main dog fence loop. You will begin to hear a combination of two sounds as you follow the twisted wire. Should there be a break in the twisted wire, the sound will slowly switch from two sounds to one sound.
How to tell if a dog fence transmitter is broken?
Your dog fence transmitter will let you know there is a break in the line by setting off an alarm. If your transmitter is alarming, and you think you may have a wire break, the first thing to check is the functionality of your dog fence transmitter. The concept of a short loop test is to create a tiny little loop of dog fence wire on your transmitter, to see if your transmitter is still alarming when this short loop of wire is connected.
How to locate a wire break?
You can locate a wire break, by using a Wire Break Locator Kit. It includes a mini transmitter and an AM radio.
How does a dog fence work?
The fence emits a radio signal that is picked up by a reciever on your dog's collar when it gets in range, causing a warning signal or an electric shock. You should be able to detect this signal in the lower AM range. The signal of my fence was roughly 600 kHz. When tuned to the right frequency, you will hear the signal as you pass ...
How to connect a transmitter to a fence?
First thing to do is make sure that you do indeed have a break. There are a few ways to do this. On my unit, two wires run from the transmitter to the perimeter fence. Disconnect these wires from the transmitter and put the ends of a paper clip or small piece of wire into the jacks where the wires had been connected.
Why does a wire break when digging?
The wire gets cut accidentally from digging. The splice locations break due to poor slicing equipment or vehicle traffic above it pulling them apart. Vehicles or lawnmowers run over the buried invisible fence and break the wire, especially at splice locations.
How long do dog collar batteries last?
Sportdog collars last for 168 hours or about 1 month of use 8 hours a day. In short, most collar batteries last at least a month and sometimes up to 4 months.
How to test a live boundary wire?
Approach the live boundary wire with the receiver collar. Test it at multiple parts along the wire. It should beep at the same distance along the wire. Set the transmitter to full power. Test the receiver collar again. It should beep at the same distance along the wire. However, this time the distance should be greater.
How to test a receiver collar?
Turn on the receiver collar and the transmitter. For all tests use the same correction level on the receiver collar. Set the collar to beep or vibrate. Set the transmitter to half power. You’ll test two different settings on the transmitter. Again, keep the collar correction level the same. For the tests, you may want to add ...
Why do dog collars slide up?
The contact posts should consistently contact the skin but shouldn’t cause abrasions. If you attach the collar too low on the neck where the neck is wider the collar may slide up when your dog runs around. This could cause the contact posts or prongs to lose contact.
What happens if a collar falls off after refitting?
If it falls off after refitting the collar you may have an issue with the buckle. Contact the manufacturer.
What is the problem with underground wire?
Your problem lies with the underground wire. There’s likely a wire break in the boundary wire. Often this occurs at the splices. You’ll need to use a specialized tool to find the wire break in your boundary wire and check the splices.
