- Remove the old handle and inner lever. The plastic piece that you can see in the picture actually unscrews. ...
- Take out your new handle and screw it on. Push your lever into the hole on the back side of the handle.
- Once you screw it altogether, attach the bar to the chain that connects to the plastic piece that blocks the water from draining all the time. ...
- Give your new toilet handle a test run. If you don’t hear water draining all the time and the toilet flushes easily, you’ve got it right!
How to repair a stuck handle on a toilet?
To fix this problem, 'you will need to remove the cover of the toilet tank and clear any debris from the impeller. You can do this by reaching in and manually moving it around. If it is difficult to reach, you can try using a coat hanger or other small tool to dislodge the obstruction.
How to flush a toilet with no handle?
- Remove the toilet tank lid and place it somewhere safe.
- In case there’s no water in the tank, or if there’s not enough of it, fill a bucket with water and pour it into the tank. ...
- Pull the chain (or lift the flapper manually, if needed) and you’ll successfully flush your toilet without touching the broken handle.
How to fix a loose or wiggling toilet handle?
- Turn off water to the toilet.
- Flush the toilet and hold down the flushing handle to remove most of the water from the tank.
- Remove the toilet tank lid.
- Disconnect the toilet flapper lift chain from the toilet handle arm and drop it inside the tank.
- Loosen the toilet handle locknut. ...
- Once loose, remove it through the flush handle arm.
How do I flush the toilet without the handle?
The best way to flush a toilet manually is:
- Remove the lid from the toilet tank.
- Determine if the chain is hooked to the flapper.
- If the chain is still attached to the flapper, pull on the chain to lift the flapper and flush the toilet.
- If the chain is detached from the flapper, reach down into the water and lift the flapper to flush the toilet.
How do you fix a broken toilet handle?
0:592:26How to Fix a Toilet - Toilet Handle Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipDisconnect the flapper chain from the flush handle and hook it over the toilets overflow tubeMoreDisconnect the flapper chain from the flush handle and hook it over the toilets overflow tube located. In the center of the toilet. Take an adjustable open end wrench and unscrew the tank lever nut.
How do you fix a broken toilet handle without a chain?
4:266:04How to Replace a Toilet Handle without a chain - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's reverse threaded so this if you're used to the way things thread normally this is backwards.MoreIt's reverse threaded so this if you're used to the way things thread normally this is backwards. And that's so that when you use the handle it doesn't loosen. This.
Is replacing a toilet handle easy?
Replacing a toilet handle is a simple project that even a novice DIYer can take care of. In just a few minutes you can update the look of your toilet and bathroom with a new handle or replace a broken toilet handle that is wiggle-free.
Are toilet handle replacements universal?
Choosing a Toilet Handle Another way to get the type of handle you need is to purchase one from the manufacturer of your specific toilet. There are also universal handles that will fit almost any toilet, no matter what type of tank lever you currently have.
How do you fix a toilet handle that won't come back?
0:142:18How to Repair Toilet Handles That Stick - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter you get the back of the tank off. You want to go ahead and remove the handle for that takeMoreAfter you get the back of the tank off. You want to go ahead and remove the handle for that take your pliers and remove the nut on the back. Guy be careful not to strip it because it is plastic.
Why does my toilet handle not come back up?
There's a small tab inside the handle mechanism that acts as a stop to hold the handle in the upright position. If the tab is worn or broken, the toilet handle won't stay up. To fix a toilet handle that won't come back up when flushed, you'll need to replace the handle.
How do you fit a toilet handle?
0:482:06How to Change a Flush Handle on a Toilet - YouTubeYouTubeStart of suggested clipEnd of suggested clipOff in a clockwise direction as this is a reverse threaded nut. Use the adjustable wrench ifMoreOff in a clockwise direction as this is a reverse threaded nut. Use the adjustable wrench if necessary remove the old flush handle insert the new flush handle.
How do you install a toilet side lever?
0:031:09How to Install Side Mount Toilet Tank Lever - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo get the most lift. Make sure the arm swings as close to the front wall of the tank as possibleMoreTo get the most lift. Make sure the arm swings as close to the front wall of the tank as possible when flushing. For some pain you may need to flip the elbow.
Are toilet flush handles standard?
Just because front toilet flush handles are the most common type, it does not mean that any front toilet handle will work on all toilets. When replacing a front flush handle, measure to ensure you have the correct size.
How to Fix a Toilet Handle
How to fix a toilet handle or to replace a toilet tank flush lever with a higher quality handle.
How to Fix a Toilet Handle
Replace a broken toilet tank flush lever with a higher quality handle with these simple tips. This tutorial will help you change out the aesthetic in your bathroom by replacing your flush level with new hardware, or you can fix a broken level. It's the same process!
Is the Broken Handle Fixable?
It's possible the broken handle can be fixed with a simple solution. What is the nature of the problem? If it's loose, you can probably tighten the nut that secures it into place. Or maybe the issue is that the flushing mechanism doesn't work at all. You might need to reconnect the flapper chain (or lift rod) to the lift arm.
Before You Start Your Replacement Project
You should know that not all toilet handles work the same. Though there are universal options, you need to be careful that you don't accidentally buy one that won't fit your toilet tank. Your handle may mount on the front, left side, or right side, and you need to take note of this before making a purchase.
Shop PlumbersStock for Parts and More
Now that you know how to replace a toilet handle remember, you can save big on all the toilet parts and plumbing tools for this project at PlumbersStock. Our organization has three decades of experience in the plumbing industry, and we've brought that expertise online.
What to do if toilet handle doesn't work?
If the new handle still doesn't work after you install it, contact a plumber to find the problem with your toilet.
How long does it take to remove a toilet handle?
Toilet handles are easy to remove and install on your own in around 15 minutes. All you need to do is unscrew the old handle and then put the new handle in its place.
What to do if a toilet nut is stripped?
If the nut inside your toilet is stripped, use a hacksaw to cut through it.
How to undo a toilet flapper?
Undo the chain clip attached to the lever. The chain clip attaches the handle to the flapper and lets you flush your toilet. Look for the section of chain clasped to the end of the metal or plastic lever that connects to the handle. Undo the clasp to detach the handle and lever from the rest of your toilet.
How to loosen a tank handle?
Locate the plastic or metal mounting nut that's holding your handle in place on the inside the top of the tank. Try twisting the nut clockwise by hand to see if you can loosen it. If not, grip the nut with a pair of locking pliers to get better leverage on it.
What to do if your toilet doesn't flush?
If your toilet doesn't flush at all, make sure the chain clip is attached to the lever properly.
Why does my flapper drop back?
The chain may be adjusted too long, which could be allowing the flapper to drop back too quickly. Try shortening the chain so it raises the flap higher when the handle is pressed. There should still be a little slack in it when at rest.
Buy a New Handle
Before purchasing a new toilet handle, check to see where the handle is located on your toilet tank.
Remove the Old Handle
With the mounting nut removed, slip the lift arm through the hole in the tank to remove the old handle.
