Repairing Guides

how to repair a cabinet hinge

by Mrs. Susan Murphy Published 3 years ago Updated 2 years ago
image

How to Fix a Loose Cabinet Door That Has Stripped Hinge Holes

  • Unscrew the hinges from the cabinet and place the door, with hinges attached, in a safe place.
  • Dip wooden toothpicks into wood glue and then stuff the cabinet hinge hole with as many toothpicks as will fit.
  • Break off the toothpicks so they are flush with the cabinet.
  • Once the glue is dry, reattach and screw the hardware back into place.

Part of a video titled How to fix bad Euro-style hinges [video 410] - YouTube
0:29
9:52
But if you have a veneered board you might want to use a piece of tape that'll pull off cleanlyMoreBut if you have a veneered board you might want to use a piece of tape that'll pull off cleanly afterwards with a position marked we can unclip the door from the hinges.

How to install cabinet hinge without "jig"?

Install cabinet pulls without using a jig by imagining that your cabinet is divided into four quarters and placing the knob in between the middle two. Alternatively, cut the exact size of your cabinet or drawer face from a piece of cardboard.

How to replace hinges on kitchen cabinets?

The first step is to thoroughly clean your kitchen cabinets or bathroom cabinetry. Riley suggests using warm water and a mild degreaser. This helps to clean any buildup of kitchen grease from over the years. In fact even the cleanest of kitchens often have some grease on their cabinets. Step number two is to lightly sand the entire cabinet.

How to install hinges on cabinet doors accurately?

Method 2 of 2: Attaching Traditional Hinges

  1. Choose a traditional hinge to add a stylistic detail to your cabinets. ...
  2. Wrap the hinges around the cabinet so they’re flush. Start by placing the hinges on the cabinet where you plan to install them, wrapped around the outer edge of ...
  3. Measure the spacing between the hinges to make sure they’re even. ...

More items...

How to install new hinges on old cabinet doors?

  • Drill pilot holes where you marked the screw location on the doors. Go slowly so you don’t drill all the way through the door.
  • Attach the new hinges with screws .
  • Install new knobs and catches or reattach the old ones.

image

How do you fix a broken cabinet door hinge?

1:009:35How to fix door hinges - cupboard cabinet repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd now we've got a nice solid hinge nice and simple simply by replacing the screws with something aMoreAnd now we've got a nice solid hinge nice and simple simply by replacing the screws with something a little bit larger in diameter.

How do you reattach cabinet door hinges?

0:100:53Attaching doors and adjusting hinges | kaboodle kitchen - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply line the hinge up with the hinge plate. And click into position to adjust doors use theMoreSimply line the hinge up with the hinge plate. And click into position to adjust doors use the screws on the hinge. And the hinge plate.

How do you fix old cabinet hinges?

Cabinet Doors Rubbing Against Each Other You can correct the problem by adjusting the hinges on each of the doors. Look for two screws on the hinge. Loosen the screw nearest to the cabinet door a bit — enough to allow you to adjust the hinge to the left or to the right. You'll have to try one direction per time.

How do you fix a joint in a cabinet door?

13:5024:53Fixing Cabinet Door Holes and Joints - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let me show you how I spread the joints on the door so that we can put glue in I take this puttyMoreSo let me show you how I spread the joints on the door so that we can put glue in I take this putty knife in the crack and I work it down in. And if you work it back and forth.

How do you fix a stripped screw hole in a wood cabinet?

0:414:52Kitchen Cabinets, Fixing Stripped Screw Holes - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll need to drill the hole a little larger so the molle will fit here i'm working the drill bitMoreYou'll need to drill the hole a little larger so the molle will fit here i'm working the drill bit with tape so don't drill all the way through the cabinet.

How do you fix door hinges?

0:432:09How to Quickly Fix a Loose Door Hinge - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can use an oscillating tool a chisel or some other flush trim saw to turn it down once the glueMoreYou can use an oscillating tool a chisel or some other flush trim saw to turn it down once the glue dries. Lastly I put the hinge back in place. And then mark the holes with a pencil.

How do you fix a broken particle board hinge?

0:001:13Fix Particle or Chipboard Screw Holes - YouTubeYouTubeStart of suggested clipEnd of suggested clipBoard you can repair it by fill in the missing area with two-part epoxy putty.MoreBoard you can repair it by fill in the missing area with two-part epoxy putty.

How do you fix a dropped cabinet door?

0:222:22How to re-align kitchen cupboard doors that have dropped out of line.YouTubeStart of suggested clipEnd of suggested clipIf the door is level that one raises the door up and down. And this one pushes it in and out so onMoreIf the door is level that one raises the door up and down. And this one pushes it in and out so on this particular one you turn the screw anti-clockwise. And it pulls the door cut down.

How do you put clips on hinges?

2:294:56Hettich Restrictor Clip Installation Video (full) - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull either and basically what you want to do to install the headache restrictor clip is you want toMorePull either and basically what you want to do to install the headache restrictor clip is you want to bend. The actual elbow to almost about a 95. Or. So 85 degree.

How do you rehang a cabinet door?

6:5410:12Cabinet Doors 101: Measure Openings, Install Hinges ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter you've drilled the pilot holes you'll only need a number two phillips screwdriver to looselyMoreAfter you've drilled the pilot holes you'll only need a number two phillips screwdriver to loosely attach the mounting plates to the face frames.

How do you put clips on hinges?

2:294:56Hettich Restrictor Clip Installation Video (full) - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull either and basically what you want to do to install the headache restrictor clip is you want toMorePull either and basically what you want to do to install the headache restrictor clip is you want to bend. The actual elbow to almost about a 95. Or. So 85 degree.

What is a European hinge?

A European hinge has many screws that can be loosened or tightened to move the entire door vertically, horizontally or in and out. The screws on the door do nothing but connect the hinge to the door, so all of the adjustments will be made on the part of the hinge attached to the cabinet.

How to adjust a hinge on a cabinet?

To adjust this type of hinge, loosen the correct screws and push the entire hinge plate in the correct direction before tightening the screw again.

What is self closing hinge?

Self-closing and soft-close hinges are two types of adjustable cabinet hinges. Various screws on the hinge can be loosened or tightened in order to change the position of the door. Therefore, if your cabinet door is sagging, not closing properly or has a large gap near the hinge, the fix is as easy as grabbing a screwdriver and adjusting ...

Why does my soft close door slam shut?

If your soft close cabinet slams shut, it could be because the door is overlapping the neighboring door and hitting it before the soft-closing mechanism has a chance to fully engage. Or, the door could be set too far out from the cabinet face, shortening the amount of time the soft-close hinge has to slow down the door. Advertisement.

Where are European hinges located?

European hinges are concealed on the inside of the cabinet and door, according to Rockler, and they have a special barrel that allows the door's position to be adjusted by simply loosening or tightening the screws within. Advertisement.

What is Euro hinge?

Euro hinges are designed for easy adjustment. If the door isn’t flush with the doors next to it, adjust the depth screw. This screw moves the door in or out. Some depth screws move the door as you turn them. But with most, you have to loosen the screw, nudge the door in or out and then tighten the screw. If your hinges don’t have depth screws, ...

How do I replace a door catch?

Adjustment is just as simple, but you might have to readjust the catch a couple of times before you get it right. Loosen the screws, move the catch in or out, and tighten the screws. If the door doesn’t close tightly, try again.

How to fix loose nails?

Remove nails, staples or screws from the loose joint and scrape away old glue with a utility knife. Predrill nails holes and glue the joint. Predrill 1/16-in. holes for nails, apply wood glue to the joint and nail it together with 1-1/2 in. finish nails.

What to do if your slides are bent?

To keep the project simple, buy new slides that are identical (or almost identical) to the old ones. That way, replacement is an easy matter of unscrewing the old and screwing on the new.

How to hide scratches on kitchen cabinets?

If you have shallow scratches or nicks, hide them with a stain-filled touch-up marker. Dab on the stain and wipe off the excess with a rag. But beware: Scratches can absorb lots of stain and turn darker than the surrounding finish. So start with a marker that’s lighter than your cabinet finish and then switch to a darker shade if needed. For deeper scratches, use a filler pencil, which fills and colors the scratch.

How to adjust hinges if they don't have depth screws?

If your hinges don’t have depth screws, start with the side screws. These move the door from side to side. In some cases, you have to loosen the depth screw slightly to adjust the side screw. Perfect one door before adjusting the second.

How do I fix a drawer?

How to Fix a Drawer: Remove fasteners and old glue. Don’t put up with a broken corner joint on a drawer. Fix it before the whole drawer comes apart. Remove the drawer and then remove the drawer front from the drawer box if possible.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9