- Identify the hole and cut the hose into 2 from that place.
- Pull out the inner tube from the sleeves from both ends.
- Find out which side has the hole and cut off the portion with the hole.
- Take 2 screw clams and put them over the sleeves on both sides (do not screw yet).
- Take a 1/2 inch barbed coupler, about 2.5″ long ( Check on Amazon ) and push both cut ends of the tube onto the 2 ends of the coupler
- Slide the sleeve over the coupler as much as possible and tighten the clams on the coupler.
- All done, your hose is now fixed and ready to use!
Full Answer
How do I prepare to repair a damaged expandable hose?
The first step in preparing to repair a damaged expandable hose is to gather the tools and supplies that will be needed, as this will prevent frustration later when working on the hose.
How do you find a hole in an expandable hose?
The easiest way to find a hole in an expandable hose is by attaching it to the spigot and turning on the water. This forces the hose to expand and will allow water to leak out of the hose where there is a hole. Some holes are large enough to be very obvious, while others are small enough so that they are harder to see.
How to fix a leaking Pocket Hose?
Yeah, sounds a bit crazy, but this pocket hose mending method works. For this repair you will need E6000 Glue; Self-Adhesive tape; A razor blade (or thin paper cutter blade) Some fishing line (braided is better) and a Needle; First, cut the outer covering of the hose carefully (do not cut the inner tube) near the place where your hose is leaking.
Why is my expandable hose leaking?
There are two ways for an expandable hose to leak: either there is a hole in the inner latex tube, or the connector has detached from the hose at one end. If you fix it the “traditional” way, you will most definitely have continuing problems. This is due to the fact that the repaired latex portion is still fragile and can rupture repeatedly.
How do you fix a collapsible hose?
0:566:50Expandable Hose (e.g. Pocket Hose) Repair Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd i could actually probably repair the other end too. So the reason i stretched it out is to makeMoreAnd i could actually probably repair the other end too. So the reason i stretched it out is to make sure the inner tube and the outer sheath are at the correct length for where i cut it.
Why do expandable hoses break?
An expandable garden hose needs sufficient water pressure to work correctly. If you have poor water pressure, the garden hose won't expand correctly. Because of the materials that hoses are made from, they may be susceptible to tears and punctures.
How do you seal a leak from a broken flexible hose?
0:532:48How To Repair Fix Leak Hole Water Hose Easy Simple - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first thing that you want to do is locate the hole. The second thing you want to do is turn offMoreThe first thing that you want to do is locate the hole. The second thing you want to do is turn off the water the third. Thing you want to do is remove all the water from inside the water hose.
Can a pocket hose be repaired?
If your expandable / pocket hose is leaking in the middle it's likely the inner flexible tube has a hole in it. But unlike a regular rubber hose, pocket hose cannot be patched up with a waterproof tape. You will need to do a little bit to work to get it fixed.
Why do flexi hoses burst?
Why do flexible hoses burst? The rubber tube inside flexible hoses expands under pressure, and the stainless steel braid is designed to prevent further expansion. However, if the stainless steel fails and breaks, water pressure will cause the rubber lining to bulge out of the sleeve and rupture.
Can you use plumbers tape on garden hose?
You are not supposed to put PTFE tape on garden hose connections, as the rubber gasket is what is supposed to provide the seal. When the connection leaks, it indicates that the gasket is worn (or the connection is not tight enough).
How do you tape a garden hose?
0:231:30ER Tape - Water Resistant Tape for Garden Hose Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipI'm just going to take a little bit cut it off peel off the back in. And this stuff works great evenMoreI'm just going to take a little bit cut it off peel off the back in. And this stuff works great even when it's wet. And it sticks to itself and doesn't leave a sticky residue.
How do you seal a leaking hose?
2:243:25How to REPAIR GARDEN HOSE in SECONDS - 3 EASY WAYS!YouTubeStart of suggested clipEnd of suggested clipEnd insert the barbed fitting. And then tighten the clamp down and now you've got a brand newMoreEnd insert the barbed fitting. And then tighten the clamp down and now you've got a brand new threaded end that you can use in your hose. And remember that every hose always has to have one female.
Do you lose pressure with an expandable hose?
Due to the materials used in expandable hoses (latex and nylon), it cannot kink or twist. As a result, you will never have a loss of flow while using an expandable hose.
Do expandable hoses lose water pressure?
Their length increased by three times, as claimed. And their flow was good, just like a regular hose. But if you try to do something such as fill up a kiddie pool with the valve fully open, the hoses may shrink because of lower water pressure. And using them with sprinklers also poses a challenge.
Why does my hose lose pressure?
Low pressure at your garden hose spigot can be caused by one or a combination of issues, such as clogged or leaking pipes, excessive corrosion in the spigot valve or a lack of water pressure coming from the street.
Can you use expandable hose with pressure washer?
In most cases, you can use an expandable water hose with a pressure washer as long as it is from the water inlet to the pressure washer. However, the hose to the sprayer cannot be an expandable hose since it cannot support the necessary PSI of water pressure.
How to repair a pocket hose?
How to repair pocket hose end / nozzle leaks? If your hose is leaking at the end of the hose aka the joint where the fitting connects the nozzle or sprayer to your hose, the inner tube might have been dismantled or disconnected from the sprayer. Leak at the hose end or valve end. Unscrew the plastic or brass fitting where it connects to the sprayer.
How to fix a leaking hose?
First, cut the outer covering of the hose carefully (do not cut the inner tube) near the place where your hose is leaking. Pull the covering apart and locate the hole. Use the E6000 glue to seal all around the area where the hole is. Smear it well and smoothen it out, leave it for 24hrs to dry.
What is pocket hose?
Pocket hose is also known as an expandable garden hose or flexible hose. You will be able to fix your hose if you follow the steps below. I have researched and listed the 2 most common problems regarding pocket hoses and how to fix them. Let’s get started,
Can you patch a pocket hose?
But unlike a regular rubber hose, pocket hose cannot be patched up with a waterproof tape. You will need to do a little bit to work to get it fixed.
