How to repair a concrete driveway
- Prep Work. Step 1: Clean the concrete. ...
- Driveway Repair. After prep work is completed, your concrete driveway is ready for the second part of concrete driveway repair.
- Concrete Driveway Sealer. A concrete driveway sealer protects your concrete driveway and keeps it looking good. ...
What are my options for repairing a concrete driveway?
- Many concrete crack fillers, sometimes called masonry crack fillers, are designed for cracks up to 1/4-inch wide. ...
- The use of a concrete backer rod is recommended for cracks wider than 1/4-inch, since these cracks are usually deep. ...
- Before you apply the new filler, break up any old concrete patch materials with a hammer or masonry chisel .
How do you resurface a concrete driveway?
- Look for a power washer with a fan tip that reaches 3500 PSI to clean your concrete slabs.
- If you don’t have access to a power washer, you can get an attachment for your garden hose.
- Cleaning your concrete makes the resurfacer adhere better.
How much does it cost to repair a concrete driveway?
How Much Does a Concrete Driveway Cost?
- Average Cost of Concrete Driveway. Most concrete driveway installation costs between $1,800 and $6,000 or $4 to $15 per square foot. ...
- New Concrete Driveway Cost Factors. ...
- Concrete Driveway Apron Cost. ...
- Cost to Replace Concrete Driveway. ...
- Repair and Maintenance Costs. ...
- Concrete vs. ...
- DIY vs. ...
- FAQs. ...
Should I resurface, repair, or replace my concrete driveway?
When it comes to fixing a driveway, your two options are generally either resurfacing it or replacing it entirely. However, there is a third option: patching it with a little extra concrete where necessary. If there’s only one hole or a surface-level crack, patching the concrete could be your best bet.
Can you resurface an existing concrete driveway?
If sprucing up your concrete driveway is on your list of home improvement projects, consider resurfacing. Resurfacing is a great way to make your existing concrete surface look brand new. You can apply a coating directly to your concrete surface without having to rip anything out—saving time, hassle, and money.
What should I use to repair concrete driveway?
1:305:16How To Repair Concrete | Pro Tips For Repairing Concrete - YouTubeYouTubeStart of suggested clipEnd of suggested clipOr you can use a vinyl concrete patching agent and a putty knife to fill it in for a wider crack youMoreOr you can use a vinyl concrete patching agent and a putty knife to fill it in for a wider crack you will need to use a small sledgehammer.
Can you fix cement driveways?
Rather than ripping out the concrete and starting over, you can often save money by repairing your driveway, as long as the concrete is structurally sound. If you aren't sure of the structural integrity of your driveway, have a professional assess the condition of your concrete and make repair recommendations.
How do you fix crumbling concrete driveway?
1:214:15Extreme How To - Patching and Repairing Concrete - YouTubeYouTubeStart of suggested clipEnd of suggested clipApply the mix of the trowel using heavy trowel pressure to force the mixture down into the crackMoreApply the mix of the trowel using heavy trowel pressure to force the mixture down into the crack overfill slightly and then trowel smooth to match the surrounding concrete.
Can you pour concrete over concrete?
You can put new concrete over old concrete. However, unresolved issues with your old concrete, such as cracks or frost heaves, will carry over to your new concrete if not taken care of. In addition, you must pour it at least 2 inches thick.
What is best to patch concrete?
For a bond strength that beats any standard repair concrete, the Damtite vinyl concrete patch is the best it gets. It is a self-bonding vinyl concrete that can be used on most concrete cracks, is able to build up the corner of steps, and will bond other materials such as tile and stone.
How do you resurface a cracked concrete driveway?
0:392:58How to Repair Cracks and Resurface Concrete - YouTubeYouTubeStart of suggested clipEnd of suggested clipEasy job for this application you'll want a fairly thick mixture I'm using a flat edged trial toMoreEasy job for this application you'll want a fairly thick mixture I'm using a flat edged trial to force the material down into the crack. Before I smooth out the surface.
Can you skim coat a concrete driveway?
If your driveway has excessive chips that detract from the overall beauty of your front yard, skim coating it will significantly improve the appearance. Pouring a thin, new layer of concrete over the old surface will smooth out any chips or pits and give you the opportunity to add color.
How do you fix a large hole in a concrete driveway?
0:080:52How to repair driveway potholes with concrete - YouTubeYouTubeStart of suggested clipEnd of suggested clipMix the concrete a little soupier than usual. So it will fill the cavity well push. It in with yourMoreMix the concrete a little soupier than usual. So it will fill the cavity well push. It in with your shovel to make sure it gets in all around overfill the hole a little and then trowel off the excess.
How do you fix disintegrating concrete?
Rub the bristles of a stiff scrub brush over the edges of the crumbling area to remove loose concrete and dirt. ... Apply a thin coat of concrete bonding agent over each of the crumbling areas, using a medium to large paintbrush. ... Apply a layer of prepared concrete 3/8 inch thick with a pointed metal trowel.More items...
Can you seal crumbling concrete?
Do you have concrete foundation that is crumbling and flaking? Some causes may be due to freeze-thaw cycles, drought and rain cycles, and shifting foundations. A way to prevent this is with the use of a penetrating concrete sealer. It is one of the most cost-effective ways to prevent crumbling and flaking.
Why is my concrete driveway disintegrating?
Too much water can wash away the soil supporting your concrete. Too little and it can cause the soil to shrink. And when water freezes and thaws over and over and over and over again, it can cause the surface of your concrete driveway to crack, pit, and crumble.
Why is my concrete driveway deteriorating?
Concrete driveway slabs can present a variety of problems due to soil settling, ground water issues, rodent burrowing and more. And, even though concrete is one of the most durable construction materials there is, without proper maintenance or repair, it will deteriorate over time.
Why does my driveway sink?
Driveway slabs sink for a number of reasons, but primarily it's due to water . Water can create voids under the driveways slabs, causing it to sink over time.
What is A-1 concrete leveling?
A-1 Concrete Leveling is the Easy Solution 1 Save 50% - 70% over the cost of replacement 2 Ready to use the same day 3 No job is too large or too small 4 Environmentally friendly 5 Our work is guaranteed 6 Locally Owned and Operated 7 Supported by our National A-1 Franchise Network 8 A-1 is a fully insured contractor 9 Professionally-trained technicians 10 Patented state of the art equipment
Why do you caulk cracks in concrete?
Then, the cracks in the concrete are caulked with long-lasting caulk to prevent water from penetrating within and beneath the concrete. This lessens the impact of the freeze/thaw process and, along with sealing, is an important step to maintain the integrity of your concrete. Learn more about concrete sealing ».
Can A-1 level concrete?
Some will have slabs that seem to move independently of each other even in the middle of the drive. A-1 can level these slabs and bring them all even with each other.
Can a concrete driveway crack?
Driveways can crack along joints and cut lines, but can also crack following random paths across the concrete driveway slabs. All of these cracks are not only ugly, but they can also cause safety concerns when the broken slabs heave or settle thereby creating trip hazzards.
Is it too expensive to level a concrete driveway?
Concrete Driveway Leveling Costs. Looking at what can be a large expanse of concrete, may make you think it's going to be too expensive to repair your out-of-level concrete driveway, but fixing your driveway doesn't have to break the bank.
How to smooth out cracks in a concrete floor?
Make the mixture a thick consistency, and pour in on the cracks. Use a flat edge trowel to force the mixture deep into the cracks. Then smooth out the surface. After allowing the material to dry overnight, a much thinner batch of resurfacer is mixed up.
Why does my concrete crack?
These can be caused by everything from tree roots and movement of the soil to freezing and thawing cycles in the winter. Rather than breaking up the slab and pouring a new one, you might want to consider repairing it using Quikrete Concrete Resurfacer.
Why does my driveway crack?
There are many reasons why your driveway may develop cracks. Improper subgrade prep, poor concrete mix, or shrinkage when curing are all factors that can cause cracks and stem from incorrect initial installation of a driveway.
How to disguise cracks in concrete?
For concrete with minor cracking or discoloration, you can completely disguise the flaws by engraving a pattern in the surface. With engraving, the concrete is stained first and then a special routing machine is used to cut the pattern into the surface, creating faux grout lines.
What is concrete resurfacing?
Concrete resurfacing to cover larger cracks or surface problems. Large cracks or holes greater than ¼”, spalling (horizontal peeling or chipping of the surface), and discoloration can be covered with resurfacing or a concrete overlay (a thin layer of cement-based material applied directly over the existing concrete).
How to revive concrete color?
In most cases, the concrete color can be revived by applying a new coat of acid or water-based stain (see Changing the Color of Integrally Colored Concrete ). Use a UV-resistant staining product and protect the concrete with a good sealer and your newly colored driveway should maintain its beauty for many years.
Why is my driveway sinking?
If your driveway slab is sinking in spots, the problem is most likely due to a poorly compacted subgrade or soil erosion. Slabs can be raised back to their original position by pumping a mixture of sand, cement, fly ash, and other additives beneath the slab—a process called slabjacking.
Why is my driveway discolored?
Discoloration of concrete driveways can be due to a number of causes including weathering, sun exposure, improper color application, and absorption of stubborn grease and oil stains.
How to get an idea of what your repairs will cost?
The best way to get an idea of what your repairs will cost is to get an estimate from a contractor near you. They can assess the extent of the damage and can recommend the appropriate solution.
How long does it take for a concrete driveway to cure?
No waiting up to 30 days for a new concrete driveway to cure and harden. A beautiful, new driveway for far less cost than demolition and replacement. Concrete Craft can have your ugly driveway repaired, restored, or resurfaced in a matter of days so you can get on with the more important things in life. And, we won’t damage your yard ...
What is concrete overlay?
Concrete overlays can be stained, stamped, and hand-carved in faux finishes like flagstone, cobblestone, Ashlar slate, and Roman slate for the exquisite look of real stone. Real stone molds and hand-applied stain colors result in finishes that look natural and authentic.
How to contact Concrete Craft?
As a local business owner in your community, we care about your complete satisfaction. Call 866-813-3699 today or go online to www.concretecraft.com to find the Concrete Craft location nearest you and request a FREE consultation. You can trust Concrete Craft to deliver on the promise of the driveway of your dreams.
What is decorative concrete overlay?
If your driveway needs a whole new look, a decorative concrete overlay will create a new finish that covers minor surface damage like cracks, imperfections and discoloration. The overlay creates a durable finish and long-lasting bond with the original concrete that will not chip, crack or peel. Concrete overlays can be stained, stamped, and hand-carved in faux finishes like flagstone, cobblestone, Ashlar slate, and Roman slate for the exquisite look of real stone.