Care & Repair - German Cuckoo Clocks Remove the back panel of the cuckoo clock. Now, pull out the wire clamps that are securing the two
How to repair a cuckoo clock made in Germany?
Service Stations
- Black Forest Werkshop, Bruce MacDonald, 94 Spicer Ave., Groton, CT 06340-3627, Phone: 860 446 1645
- Miller’s Clock Service, 426 Broard St., Oshkosh, WI 54901, Phone: 414 235 4750
- The Clockmaker, Kenneth H. ...
- Roseville Clock Shop, 28085 Gratiot Ave., Roseville, MI 48066, Phone: 586 772 5180
Why is my cuckoo clock running slow?
Things to Consider Before Slowing Down a Cuckoo Clock:
- Cuckoo clocks operate on a pendulum mechanism that regulates the cuckoo’s speed pops out of the clock.
- Slowing down the pendulum will affect the timing of the cuckoo popping out.
- If you are not familiar with adjusting the pendulum on your cuckoo clock, it is best not to attempt to slow down your cuckoo clock.
Why is my cuckoo clock stopping?
Video 4: How to Fix a Cuckoo Clock When the Music Fails
- The wire does not release the fan fly after the cuckoo calls, so the music is not activated
- The wire touches the fan fly and the impact causes a chattering sound
- The wire does not hold the fan fly and the music plays at the same time the cuckoo calls. ...
How to fix your pendulum Issus on Your Cuckoo Clock?
you could try to just oil it a bit with good clock oil (lots of info on that on this board) but you might run into the problem that the old lubricant starts to gum up the new oil very quickly. Try tilting the clock in small increments---to the right---then to the left--and try swinging the pendulum. It may simply be out of beat! .
How do you troubleshoot a cuckoo clock?
If your cuckoo clock still doesn't run, then it's time to move the minute hand. Set it back by half an hour, then immediately move it forward to the hour and allow for it to cuckoo. Afterward, set the pendulum so it swings again. In the event that it still doesn't run, try carefully and fully winding the weights.
How do I fix the cuckoo on my cuckoo clock?
To fix this, move the minute hand to the next full hour, counting the number of cuckoos emitted. Then, move the hour (shorter) hand to that number as well. Afterward, you can reset the clock to the correct time with the minute hand.
How much does it cost to repair a cuckoo clock?
$200 to $400Cuckoo clocks Cuckoo clock repair costs $200 to $400, depending on the number of weights.
How do you get an old cuckoo clock to work?
1:082:26Cuckoo Clock not working - Cuckoo Clock Service Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake a wide screwdriver or something similar and bend the pendulum wire slightly to the left if theMoreTake a wide screwdriver or something similar and bend the pendulum wire slightly to the left if the clock is hanging too much to the right visually.
How do you reset a German cuckoo clock?
To reset the battery-powered cuckoo clock, do the following:1) Remove the batteries.2) With your finger, gently and steadily rotate ONLY the minute hand clock-wise (it's very important you move it clockwise) until both the minute hand and the hour hand point to 12 o'clock.More items...
How does a German cuckoo clock work?
The chains wrap around a chain gear that drives the internal gears of the clock. Over time the weights slowly drop to the ground. The weights are pulled back up when they reach the floor and this rewinds the clock. On the half hour, the cuckoo calls once and on the full hour, the cuckoo calls the number of the hours.
Is it worth repairing a clock?
It depends on why you want your clock fixed. Antique clocks often have sentimental value attached, and if the cost of the repair is worth being able to hear your Great Aunt's mantel clock ticking once again, then, of course, it is worth fixing (even if a replacement would be cheaper).
Are cuckoo clocks worth money?
A 1950s cuckoo clock can sell for between $50 and $1,000 with larger carved clocks selling at the higher end. Antique carved German cuckoo clocks in elaborate carved designs can have been known to reach nearly $2,000 at auction for particularly fine examples and sometimes sell for more than $3,000in rare cases.
Why does the pendulum on my cuckoo clock keep stopping?
One of the most common reasons owners have issues with their coo coo clock stopping is that the mechanical movement of the cuckoo clock is not level. This generally happens when the cuckoo clock is not hung level or straight on the wall.
Why won't the door on my cuckoo clock close?
Needs Oil. The cuckoo clock movement may need oiling at least on the arms that make the bird go in and out of its house. Also, it is good to put a drop of clock oil on the door hinges and the connections for the wire that goes from the bird to the door.
How do you lubricate a cuckoo clock?
5:549:51CUCKOO CLOCK CLEANING AND OILING - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo then you're just going to go through the clock and you're just going to drop a little piece ofMoreSo then you're just going to go through the clock and you're just going to drop a little piece of oil on all of the holes.
What is the lever on the side of my cuckoo clock?
Silent Lever. Most River City Cuckoo clocks have a "silent" lever on the side or bottom of the case. Place the lever in the "on" position if you want your clock to "cuckoo" and play music (on models so equipped). In the "silent" or "off" position, both cuckoo and music are silenced.
How do I get my clock to chime correctly?
Turn the minute hand forward to the next hour. When striking stops, push up (or pull down on some clocks) the little wire hanging beneath the dial and let the clock strike. Each time you push (or pull) the wire, the clocks will strike the next hour. Repeat until the correct hour is struck.
Why won't the door on my cuckoo clock close?
Needs Oil. The cuckoo clock movement may need oiling at least on the arms that make the bird go in and out of its house. Also, it is good to put a drop of clock oil on the door hinges and the connections for the wire that goes from the bird to the door.
Why cuckoo clock pendulum stops?
One of the most common reasons owners have issues with their coo coo clock stopping is that the mechanical movement of the cuckoo clock is not level. This generally happens when the cuckoo clock is not hung level or straight on the wall.
Can you Overwind a cuckoo clock?
It is impossible to overwind your cuckoo, however you may damage the chains if you continue to pull on them once the weights have reached the base of the clock. Regulating your clock. You can adjust your clock to run faster or slower.
Cuckoo Clock Repair Tips - How to Fix A Black Forest Cuckoo Clock
There are a lot of decisions to make before buying a Black Forest cuckoo clock. But once someone has finally chosena cuckoo clock style, movement,...
How Tofix A Cuckoo Clock - Common Timing Issues
One of the most common reasons owners have issues with their coo coo clock stopping is that the mechanical movement of the cuckoo clock is not leve...
Troubleshooting Cuckooclock Parts: #1 Cuckoo Call
One of the best parts of a Black Forest cuckooclock is the sound of the cuckoo. If the cuckoo bird is quiet, there are a fewcuckoo clock troublesho...
Troubleshooting Cuckooclock Parts: #2 Music Box
If your cuckoo clock is musical but not playing the music properly,there are simple cuckoo clock repairs to address this.First, you'll need to remo...
Troubleshooting Cuckooclock Parts: #3 Clock Hands
If the hands on the cuckoo clock are dangling,then they certainly need adjusting. Luckily, when it comes to troubleshooting cuckoo clock parts, cha...
How does a cuckoo clock work?
As the weights descend, they advance wheels inside the cuckoo clock. These wheels, in turn, move other gears that control the hands of the clock and also the cuckoo. The time itself is regulated by the movement of a pendulum. As the pendulum swings from side to side, it advances a wheel that controls the speed of the other gears. Often, repairing a cuckoo clock made in Germany can be as simple as adjusting the pendulum.
What to do if cuckoo clock runs too fast?
Move the pendulum bob downward if the cuckoo clock runs too fast.
Can a cuckoo clock pendulum hit a wall?
Make sure the German cuckoo clock pendulum can move freely. The pendulum must not hit the wall, or the chains that hold the weights. The clock itself must also be completely level for the pendulum to swing correctly.
How to fix a cuckoo that is moving?
To fix this you can simply turn the wire around the cuckoo — carefully — so it is under the cuckoo’s tail again. This should be quite easy if you open the cuckoo’s door (the cuckoo will move forward when the door is opened).
How to adjust cuckoo hand?
To adjust the hand you should loosen the hand nut, reposition the minute-hand to the proper hour, and retighten the hand nut. If the cuckoo calls the wrong hour (cuckoos 3 times at 4 o’clock), loosen the hour hand by carefully pulling it off the shaft, move the hand to the 3 o’clock position once it is loose, and push it back onto the shaft. Never adjust the time by moving the hour hand, since this will cause the exact same problem.
How to fix a broken clock chain?
To fix this, pull the other chains fully up and remove all weights. Take a piece of wire and secure the other chains under the clock’s case “as close as possible” to the bottom of the case (see picture). This is VERY IMPORTANT, otherwise the other chains will fall off their wheels as well during the next step. Take the clock from the wall and open it on the back. Now turn the clock upside-down and try to balance the chain back on the wheel.
How to send a clock to a service station?
To send a clock to a service station, pull the chains so the hooks are under the case . Insert a piece of string, wire or a twist wrap through all the chains “close as possible to the case bottom.”. Bundle up the chains in a piece of aluminium foil and tie up tightly with a rubber band, tape or string. This prevents the chains from coming ...
What to do if your clock is running too fast?
If your clock runs too fast, you can move the pendulum-disc down a little on the pendulum to correct this . If the clock is running too slow, you have to move the pendulum-disc up. This should also be described in your clock’s setup instructions.
What happens if a wire is turned above a cuckoo?
During shipping, it may happen that this wire is turned above the cuckoo. If it is above, it may block the cuckoo and the door.
Can you service a clock sold by us?
Please understand that we can only service clocks sold by us. For your convenience, we have listed some other service stations you may want to use instead (our customers have to use us during the two-year warranty). Please do not simply send your clock to an address on this list! Call the service station in advance. Ask them if they will repair your clock, and also ask them for their prices and for SHIPPING INSTRUCTIONS. If you think that your clock may be under warranty, contact the shop that sold you the clock or the manufacturer first.
Cuckoo Clock History
The first cuckoo clocks were designed and created in Germany in the early 18th century. They were made entirely of wood. Even the moving parts were all carefully crafted from wood pieces.
Popular Cuckoo Clock Makers
Some of the most popular German cuckoo clock makers have been crafting cuckoo clocks for many years. We are a certified warranty repair center for many of these manufacturers including, Anton Schneider, Hubert Herr and Hones clocks. We also repair the classic Black Forest cuckoo clock styles.
Has Your Cuckoo Bird Lost His Song?
Our skilled craftsmen know how to repair a variety of cuckoo clock styles. We know many cuckoo clocks hold a special place in the owner’s heart. Often, these clocks are passed down from generation to generation or were bought on a trip to Germany.
