How to Repair a Leaky Delta 1400 Series Shower Faucet
- 1.. Turn off faucet water supply. For a tub/shower, there may be an access panel with isolated shut-off valves located...
- 2.. Remove faucet handle button with a screwdriver. Remove handle set screw using the appropriately sized Allen wrench.
- 3.. Remove the outside sleeve and unscrew the brass bonnet.
Full Answer
How to replace a Delta shower faucet?
Firstly, use an Allan wrench to loosen the setscrews and remove the faucet handle. Once you have loosened the setscrews, the handle of your faucet should simply pull out. Once you have removed the handle of your Delta shower faucet, now remove the trim sleeve and spacer. This can be achieved by simply pulling them out
Why is my Delta 1400 series shower faucet leaking water?
Deterioration of the internal seats and springs can lead to water leaks from the faucet. Repairing a leaky Delta 1400 series shower faucet requires a replacement cartridge assembly kit and a few hand tools.
How long does it take to repair a Delta monitor faucet?
Learning how to repair a Delta 1400 series Monitor tub and/or shower faucet should take only a few minutes, depending on your skill level. There are two similar Delta Monitor faucet designs, the 1300 and 1400 series. Both styles use the same Delta faucet cartridge, RP46074.
How do you remove the handle on a monitor 1400 faucet?
Remove the series 1400 Monitor faucet handle. Also remove the plastic acrylic handle; pop out the index button on the front of the faucet handle using a small flat-tip screwdriver. The index button is a flat plastic cap on the front of the faucet handle, usually marked with hot and cold indicators.
How do you take apart a Delta 1400 shower faucet?
2:007:10Fixing a leaky shower head (Replacing Delta Monitor Series ...YouTubeStart of suggested clipEnd of suggested clipNow we're just going to use an allen key to remove the handle. And now we can slip off that cover.MoreNow we're just going to use an allen key to remove the handle. And now we can slip off that cover. And now that it exposes. The bonnet nut now you'll need a strap wrench to get this loosened.
How do I disassemble a Delta shower faucet?
2:516:30How to Replace a Delta Faucet Shower Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a strap wrench or a pair of channellock pliers to loosen the bonnet nut by turning itMoreUse a strap wrench or a pair of channellock pliers to loosen the bonnet nut by turning it counterclockwise then remove the bonnet nut by hand.
How do you fix a Delta single handle shower faucet?
0:064:13Repairing a leaky Delta bath or shower faucet-single lever and ...YouTubeStart of suggested clipEnd of suggested clipWhat you're going to probably have to do is take a pipe wrench. And then how long your fast has beenMoreWhat you're going to probably have to do is take a pipe wrench. And then how long your fast has been there take a pipe wrench and just try giving it a turn here.
How do I replace my Delta 1300 1400 cartridge?
3:5217:23DIY Replacement Delta Shower Faucet 1300 / 1400 CartridgeYouTubeStart of suggested clipEnd of suggested clipVery simple you have an allen wrench. You reach inside here and you're just going to loosen up theMoreVery simple you have an allen wrench. You reach inside here and you're just going to loosen up the set screw that's inside the handle here.
How do I repair my Delta shower faucet?
5:156:28How to Replace a Delta Tub or Shower Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipReach in and slide out the cartridge by wiggling it back and forth while pulling. Apply someMoreReach in and slide out the cartridge by wiggling it back and forth while pulling. Apply some lubricant to the o-rings of a new cartridge and install.
How do I know what model Delta faucet I have?
The model number is on all packaging, some faucets, and all installation instructions provided with your faucet. On the packaging, look near the UPC code or the top of the box. On the faucet, a model identification tag has been attached to most models manufactured since 2012.
How do you remove a Delta shower handle without screws?
Use Force. Gently tug and jerk the shower handle from side to side. You want to turn it around in circular motions, so that if there are screws, they will pull out of the wall without ripping the wall out. You also want to avoid putting too much sideways or forward force on the valve or stem cartridge.
Do Delta faucets have a lifetime warranty?
Delta® Non-Electronic Lifetime Faucet and Finish Limited Warranty. All parts and finishes of the Delta faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns their home.
How do I know if my Delta shower cartridge is bad?
How to tell if your shower cartridge is bad:Dripping or running water when you turn your shower off (most common)Difficulty turning the shower handle, which worsens over time.Shower handle gets stuck or “slips” and doesn't turn on the water.
Are all Delta shower cartridges the same?
Delta Trim Kits are arranged into different series based on the Cartridge they include. Monitor 14, Monitor 17, and Monitor 17T Series refer to differences in the Shower Cartridge included with the Trim Kit.
How do you replace a single handle faucet cartridge?
0:372:26Repairing a Leaky Single Handle Cartridge-Type Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a wrench to remove the retainer. Next pull the cartridge from your father. Now that you removeMoreUse a wrench to remove the retainer. Next pull the cartridge from your father. Now that you remove the cartridge you need to take it to your local retailer.
How do you remove a Delta faucet handle with no set screws?
Some single-handle Delta® bathroom faucets come with a Push-Fit Handle that eliminates the need for a set screw to secure the handle to the faucet. To remove a Push-Fit Handle, align the handle with the spout and pull the handle straight away from the faucet body. If your handle is on top, you pull upward.
How do you remove a Delta faucet cap?
1:213:08How to Replace the Cartridge in a Single Handle Delta FaucetYouTubeStart of suggested clipEnd of suggested clipPlace a cloth over top and use the channel lock pliers to unscrew the cap. Next unscrew the bonnetMorePlace a cloth over top and use the channel lock pliers to unscrew the cap. Next unscrew the bonnet nut remove the old cartridge. Now soak up any additional water in the faucet.
How do you remove a Delta shower handle with threaded bonnets?
0:002:08remove stuck bonnet nut (easy way) - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust enough for a flathead screwdriver to get a good grip a nice wide flat head screwdriver. And getMoreJust enough for a flathead screwdriver to get a good grip a nice wide flat head screwdriver. And get it in there at a nice sharp angle. And wrap it a couple times with a hammer.
How do you remove a screwless faucet handle?
Once you find the necessary tools, you'll need to follow these steps to remove the screwless faucet handle successfully.Step 1: Turn off the water. ... Step 2: Remove the cap on top of your faucet. ... Step 3: Remove the hidden set crew. ... Step 4: Remove the faucet handle. ... Step 5: Rinse off mineral deposits.
What is a Delta 1400 series shower faucet?
The Delta 1400 series shower faucet is a single-handle water controller that uses an internal valve system to provide flow control and temperature adjustment. Deterioration of the internal seats and springs can lead to water leaks from the faucet. Repairing a leaky Delta 1400 series shower faucet requires a replacement cartridge assembly kit and a few hand tools.
How to stop water from flowing in bathroom?
For a tub/shower, there may be an access panel with isolated shut-off valves located in the bathroom or in an adjacent room, closet or hallway. If available , rotate valves in a clockwise direction to stop the flow of water. For homes with no isolated shut-off valves, turn off the main water supply to the home.
How long does it take to repair a Delta shower faucet?
Learning how to repair a Delta 1400 series Monitor tub and/or shower faucet should take only a few minutes, depending on your skill level. There are two similar Delta Monitor faucet designs, the 1300 and 1400 series.
Where is the shut off valve on Delta faucet?
Locate and close your home's main water shut-off valve. These valves are usually found near utility rooms, laundry rooms, in basements or out in the yard by the curb. If you are not sure where your home's shut-off valve is located, you can call your water company and ask them to temporarily turn off your water while you repair your Delta faucet.
How to unscrew a faucet nut?
Rotate the ring counterclockwise until removed. If the nut is difficult to remove due to mineral build-up or corrosion, wrap a cloth soaked in vinegar around it for 15-minute intervals until you can unscrew it easily.
Where is the index button on a faucet?
The index button is a flat plastic cap on the front of the faucet handle , usually marked with hot and cold indicators. Use a Phillips screwdriver to unscrew the handle retaining screw located under the index cap; slide the handle off the faucet stem.
Where is the water shut off valve?
Locate and close your home's main water shut-off valve. These valves are usually found near utility rooms, laundry rooms, in basements or out in the yard by the curb. If you are not sure where your home's shut-off valve is located, you can call your water company and ask them to temporarily turn off your water while you repair your Delta faucet. Open the Delta faucet and all the outside faucets around your home to drain any remaining water pressure from the plumbing system.
Can you use pipe wrenches to unscrew a bonnet nut?
Do not use pipe wrenches to unscrew the bonnet nut -- you can easily warp the soft metal and ruin the faucet.
Delta 1400 series shower faucet repair
I just recently installed a new water heater, and evidently some of the crud from the old one got into the pipes and clogged up some of the faucet valves. It stopped up the aerator in the sink faucet, but I was able to easily disassemble it and unclog the filter. I have not had such good luck with the Delta Monitor 1400 series shower faucet.
Comments (10)
I found a technical diagram section on Delta faucets website With teardown diagrams. You need the full model #. they are PDF pages that you can print off. If that does't help there is an online chat with customer service or you can call them
How long does it take to replace a Delta shower faucet?
In this section, we will look at how to replace the 1300/1400 series faucet. The entire process should only take you are twenty minutes :
Why replace Delta 1700 series faucet?
If the reason for replacing your 1700 series Delta Faucet is because of a leak, you may need to check the spring, seats, or seals. If replacing the cartridge doesn’t stop the leak, look for the spring, seal, and seats located behind the cartridge and on a valve adapter. In order to replace the valve adapter of your 1700 series faucet, ...
How long do Delta shower faucets last?
Delta Shower Faucets are renowned for lasting for many years, and a correct DIY or professional replacement cartridge for your faucet will ensure you carry on enjoying your Delta Shower for longer.
How to get rid of water in shower?
Open up your bathroom taps and your shower faucet after turning off the water supply to ensure you get rid of any water left in the pipes and to normalize the pressure. Next, cover over the drain in your shower, and any other drains such as your sink.
How to remove bonnet nut?
With the cartridge assembly now visible, remove the bonnet nut. This can be done by using either a wrench or lock pliers. The bonnet nut can be loosened by turning it anti-clockwise with the wrench or pliers. Once it is loose, you can take the nut out by hand.
What happens when you remove a water cartridge?
When you remove the cartridge, any water that was left in the valves will be released. Depending on the model of cartridge you have, your replacement will either be white or gray in color. Make sure that you have the correct cartridge to hand at this stage.
Which side of faucet is hot?
(On the majority of faucets, the hot side will be on the left-hand side)
