Repairing your old Delta faucet
- Turn off the water supply to your shower. ...
- Go outside and turn on any of your home’s wall hydrants or faucets. ...
- After you have removed this screw, the bonnet nut will also have to be removed. ...
- Equip yourself with a pair of fine tweezers. ...
- Once you have removed both the springs and the seats, inspect the inside of the housing. ...
How to rebuild a Delta single handle faucet?
- Look to see whether the spout is dripping—this is the most common cause of a leak. ...
- Shut off the hot and cold water supply valves, which are usually silver knobs under the sink. Turn on the faucet to drain any water in the lines. ...
- After removing the screw cover on the faucet handle, use a screwdriver to lift off the actual handle. ...
How to replace a Delta shower faucet?
How to Replace Seals & Springs in a Delta Shower Faucet. 1. Shut Off the Water. Turn off the main water connection to the bathroom. If there is no alternative way to do it, shut off the main water ...
How do you fix a single handle shower faucet?
Tools you may need:
- Phillips-Head screwdriver
- Slotted screwdriver
- Wrench (Some shower faucets require a specialized tool, a cartridge puller, to remove the cartridge. Read your manufacturer’s manual for more information.)
- Needle nose pliers
- Hex key (Sometimes called an Allen key, this tool is needed to remove some faucet handles.)
How to replace washer in Delta shower?
Things You'll Need
- Dull knife or flathead screwdriver
- Adjustable pliers
- Phillips head screwdriver
- O-ring
- Stem washer
- Heatproof grease
How do you fix a Delta single handle shower faucet?
1:054:13Repairing a leaky Delta bath or shower faucet-single lever and ...YouTubeStart of suggested clipEnd of suggested clipOn the top and the bottom there's two screwdriver slots just a matter of putting a commonMoreOn the top and the bottom there's two screwdriver slots just a matter of putting a common screwdriver in place going like so and there's your cartridge. Um delta go is good for their cartridge.
How do you take apart a Delta shower faucet?
0:356:30How to Replace a Delta Faucet Shower Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor more information check the cartridge reference sheet in the instruction. Manual. Using an allenMoreFor more information check the cartridge reference sheet in the instruction. Manual. Using an allen wrench loosen. The set screw holding the handle in place. Now remove the handle.
How do you fix a old Delta shower faucet?
3:338:32HOW TO REPLACE PARTS TO 40 YR.OLD DELTA SHOWER VALVEYouTubeStart of suggested clipEnd of suggested clipBut before you decide to get involved in doing all this stuff and cutting bonnet nuts out andMoreBut before you decide to get involved in doing all this stuff and cutting bonnet nuts out and everything make sure you have the proper replacement. Parts you need a handle because there was none.
How do I know what model Delta faucet I have?
The model number on the package by the UPC code or may be found on a supply line tag. We also have an online tool to help identify the model. The model number is on all packaging, some faucets, and all installation instructions provided with your faucet. On the packaging, look near the UPC code or the top of the box.
How do you remove a single handle shower faucet without set screws?
0:157:48Kohler Coralais shower handle (#71947) removal, no allen set ...YouTubeStart of suggested clipEnd of suggested clipSo we're going to do that here we'll show you that but first we're going to shut the water off soMoreSo we're going to do that here we'll show you that but first we're going to shut the water off so that we don't get all wet stand in here.
How do I change the cartridge in my delta bathroom faucet?
1:253:15How To Fix A Leaky Delta Two Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a wrench or channel lock pliers to loosen the bonnet nut make sure to note where the quarterMoreUse a wrench or channel lock pliers to loosen the bonnet nut make sure to note where the quarter term stop is set on top of the cartridge. And use a pair of pliers to grab the top of the cartridge.
How do you take apart a Delta shower head?
0:002:11How To Change A Showerhead by Delta - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust remove the old shower head by turning it counterclockwise. If you can't do it by hand use anMoreJust remove the old shower head by turning it counterclockwise. If you can't do it by hand use an adjustable wrench. Make sure the shower arm doesn't turn inside the wall.
How do I know what Delta shower cartridge I need?
8:3911:35WHICH DELTA CARTRIDGE DO YOU HAVE HOW TO REPLACE A ...YouTubeStart of suggested clipEnd of suggested clipSo they do not interchange. This is the new cartridge. Every one I've seen is gray on top. But theMoreSo they do not interchange. This is the new cartridge. Every one I've seen is gray on top. But the front section it's it's very similar still got that same style handle. It's that same handle fits it.
How do I know what shower valve I have?
Count the Number of Shower Faucet Handles Often, the type of shower faucet and handle(s) will indicate what kind of shower valve is behind it. Zero handles may imply a shower panel faucet with buttons to control water flow and temperature.
Are Delta faucets guaranteed for life?
All parts and finishes of the Delta faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns their home.
Are all Delta Faucet cartridges the same?
The Delta 1300 and 1400 Series Trim Kits include the single function cartridge. The Delta 1700 Series Trim Kits include the Dual-Function Cartridge. The 17T Series Trim Kits all come with the Dual-Function Thermostatic Valve Cartridge. Remember from before, ALL TRIM KITS USE THE SAME VALVE.
Where do I find my faucet model number?
Identifying Your Faucet ModelThe model number is printed on a tag that is attached to the cold water supply line of the faucet.The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet.The model number, or part number, is typically preceded by "P/N."More items...
How do you remove a Delta shower handle with threaded bonnets?
0:002:08remove stuck bonnet nut (easy way) - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust enough for a flathead screwdriver to get a good grip a nice wide flat head screwdriver. And getMoreJust enough for a flathead screwdriver to get a good grip a nice wide flat head screwdriver. And get it in there at a nice sharp angle. And wrap it a couple times with a hammer.
How do you remove a Delta faucet without screws?
You can use an allen wrench (also called an allen key) to remove it. Once you've done that, you can typically just lift the faucet handle off. However, if it has a cartridge inside, you may need to unscrew a top piece as well to be able to remove the cartridge.
How do you take apart a Delta shower head?
0:002:11How To Change A Showerhead by Delta - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust remove the old shower head by turning it counterclockwise. If you can't do it by hand use anMoreJust remove the old shower head by turning it counterclockwise. If you can't do it by hand use an adjustable wrench. Make sure the shower arm doesn't turn inside the wall.
How do you fix a Delta 2 handle shower faucet?
0:226:52How to fix a leaking, dripping Delta bathtub faucet - $2 fix - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust take the covers off of these handles. So just get a little knife here. And pop those off nextMoreJust take the covers off of these handles. So just get a little knife here. And pop those off next you can see those screws in there so we've got to take those out so we can take the handles. Off.
How to drain water from shower?
Go outside and turn on any of your home’s wall hydrants or faucets. Let it run for a few minutes. This will drain your home’s water supply. Head back inside and turn on the shower faucet. This will also help drain the last of the leftover water. You’ll now want to remove the handle.
How to get a valve cartridge out of a spherical cylinder?
Grab onto the valve cartridge and wiggle it back and forth while also pulling on it. With a little effort, it should come right out.
How to stop a faucet from leaking?
Investigate the cap and adjusting ring by taking a good look. If the faucet seems to be leaking from there, try tightening the adjusting ring with needle-nose pliers. If that doesn’t stop the leak, you’ll need to replace the faucet’s seats and springs.
How long does water run in a faucet?
The water needs to run for one minute. For kitchen & bathroom faucets, be sure to put a bucket upside down over top of the faucet in order to direct the water down to the sink, or water will spray everywhere. Turn the water off at the supply lines again before re-assembling. 8.
Do you need an adjusting ring for a faucet?
Depending on the age of your faucet, you may not have an adjusting ring. For those with newer faucets that don’t contain adjusting rings, please skip this step. If you have an older faucet with an adjusting ring, it will not be needed after the repair if the cam/packing is replaced.
What is Delta faucet?
Delta originally introduced this as a kitchen faucet and in short time had the complete line up including bathroom faucets, shower faucets, tub and shower faucets.
What was the first company to claim to be the washerless faucet?
When the Delta single lever faucet was introduced, you would think it was the birth of the i-phone. To the best of my knowledge, this was the first company that claimed to be “the washer-less faucet.”.
What is included in a faucet repair kit?
These are available in a basic repair kit but if you get the deluxe version (highly recommended) you’ll also receive the cam washer, cam cover, a spray diverter (if your faucet has a spray head), “O” ring washers and a handy allen key and cam tool.
What is the difference between a delta shower faucet and a ball valve?
By Chris Deziel. Delta pioneered the ball-valve faucet, and Delta shower faucets often use that technology or cartridges. Both types have springs and seals that wear out. The repair procedure involves disassembling the valve and doesn't vary much from one type to the other. The main difference is that cartridges tend to get stuck inside ...
How to remove cartridge from ball valve?
Unscrew the bonnet holding the cartridge or ball valve in place with adjustable pliers. Once the bonnet is off, the ball valve will fall off. If it's a cartridge, however, you have to pull it out after removing the sleeve that covers it, which you should be able to pull out with your fingers.
What happens if you forget to turn off the water before you unscrew the retaining collar?
Warnings. If you forget to turn the water off before you unscrew the retaining collar, you could be scalded by an uncontrollable stream of hot water. Writer Bio. Chris Deziel has a bachelor's degree in physics and a master's degree in humanities.
How to dissolve mineral deposits in water cartridge?
If you have hard water, it's possible that mineral deposits are binding the cartridge. If you suspect this, spray the cartridge generously with white vinegar and wait overnight. The vinegar will dissolve the deposits.
How to replace O rings?
Cut worn O- rings from a cartridge with a utility knife. Install new O-rings after coating them with plumber's grease to make them slide more easily and improve the seal they make.
How to break rubber O rings?
Grip the cartridge stem with the pliers and pull sharply to break the seal the rubber O-rings have made with the cartridge housing. If it won't move, try rotating it back and forth. If that doesn't work, clamp locking pliers onto the stem and pull hard. In extreme cases, you may need a universal cartridge puller, available at hardware stores.
