- Shut off both the hot and cold water supply valves underneath your sink. ...
- To remove the handle, take off the screw cover; use a screwdriver or Allen wrench to remove the screw. Lift off the handle.
- Depending on the age of your faucet, you may not have an adjusting ring. For those with newer faucets that don’t contain adjusting rings, please skip this step. ...
- Unscrew and remove the adjusting ring. Then, unscrew the dome-shaped cap by placing a cloth over the cap for grip and using tongue-and-groove pliers to unscrew it. ...
- Pull out the round metal stem; when you do, you’ll remove the ball, as well as the piece called the “cam and packing.” If your faucet’s leaking from here, ...
- Look into the valve and you’ll see a small mechanism called the “seats and springs.” The “seat” is the small circular part, and the “spring” is beneath the seat. ...
- Before putting the faucet together again, remove the aerator and turn on both the hot and cold water all the way to flush the lines. ...
- Insert a new set of seats and springs into the holes. ...
- Replace the ball assembly, aligning the pin and the valve to the slot on the ball.
- Replace the cam and packing, aligning the tab on the cam with the slot on the valve.
- Gently screw the cap on the valve using only your hand. Replace the adjusting ring and tighten with needle-nose pliers. Reinstall the handle.
- Turn on the water to ensure you’ve fixed the leak.
How to fix a leaking, dripping Delta bathtub faucet?
What You’ll Need to Repair the Faucet:
- 1/8-inch Allen wrench
- Needle-nose pliers
- Tongue-and-groove pliers
- Screwdriver
- Replacement parts (If you have a lever-handle style product, you need RP61; if you have a knob handle you need RP188.)
How to repair a Delta Leland Bath faucet?
Touch-Clean ® spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. Installing a Delta MultiChoice Universal Valve makes it faster, easier and less expensive to upgrade style, finish and functionality later.
How to replace a Delta Roman tub faucet?
- Turn off the water valves at the main incoming water pipe.
- Remove the cap on the faucet handle and loosen the screw underneath with an Allen wrench.
- Pry out the clip around the cartridge with a pair of needle-nose pliers.
- Install a new cartridge inside the faucet head.
How do you remove a Delta Faucet?
- Pry the cap off handle’s center exposing the screw underneath.
- Take out the center screw with a screwdriver or use an Allen wrench loosening a hollow-set screw in the side.
- Pull the round, metal plate on the valve assembly’s end toward you in the open, locked position.
How do you fix a leaky Delta bathtub faucet?
0:373:26How to replace a Delta Cartridge and fix a leaky bathtub faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you have to do is wiggle it a little bit and pull it out and you'll notice there is a littleMoreAll you have to do is wiggle it a little bit and pull it out and you'll notice there is a little extra water that will come out so don't be alarmed by that.
How do you take apart a Delta shower faucet?
0:356:30How to Replace a Delta Faucet Shower Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor more information check the cartridge reference sheet in the instruction. Manual. Using an allenMoreFor more information check the cartridge reference sheet in the instruction. Manual. Using an allen wrench loosen. The set screw holding the handle in place. Now remove the handle.
Why is my Delta tub faucet leaking?
Delta tub faucets contain rubber seats that look similar to washers as well as metal springs to help regulate the flow of hot and cold water through the faucet. When you start to see water leaking out of the spout, you will need to replace the worn seats and springs to correct the problem.
How do you fix a Delta 2 handle bathroom faucet?
1:323:15How To Fix A Leaky Delta Two Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a wrench or channel lock pliers to loosen the bonnet nut make sure to note where the quarterMoreUse a wrench or channel lock pliers to loosen the bonnet nut make sure to note where the quarter term stop is set on top of the cartridge. And use a pair of pliers to grab the top of the cartridge.
How do I know what model Delta Faucet I have?
The model number is on all packaging, some faucets, and all installation instructions provided with your faucet. On the packaging, look near the UPC code or the top of the box. On the faucet, a model identification tag has been attached to most models manufactured since 2012.
How do you fix a old Delta shower faucet?
3:338:32HOW TO REPLACE PARTS TO 40 YR.OLD DELTA SHOWER VALVEYouTubeStart of suggested clipEnd of suggested clipBut before you decide to get involved in doing all this stuff and cutting bonnet nuts out andMoreBut before you decide to get involved in doing all this stuff and cutting bonnet nuts out and everything make sure you have the proper replacement. Parts you need a handle because there was none.
How do you fix a leaky Delta single handle faucet?
0:024:06How To Rebuild A Delta Single Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce we have the handle took off we're going to need to open our rebuild kit as it has the tool toMoreOnce we have the handle took off we're going to need to open our rebuild kit as it has the tool to loosen that nut on the top of the faucet. The part numbers gonna be at our b-36.
How do you fix a leaking single handle bathtub faucet?
0:172:38Repairing a Leaky Single Handle Tub/Shower Ball-Type FaucetYouTubeStart of suggested clipEnd of suggested clipTurn off the main water supply to your home. For an obstacle remove the index button by prying offMoreTurn off the main water supply to your home. For an obstacle remove the index button by prying off with the screwdriver. Then unscrew the handle screw. And remove the handle.
How do you replace springs and seats in a delta tub faucet?
2:114:00How to Replace the Seats & Springs in a Single Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe springs are wedge-shaped the larger part should be on the bottom with the rubber seats acting asMoreThe springs are wedge-shaped the larger part should be on the bottom with the rubber seats acting as a cap. Now insert your new seats and springs in the holes.
How do you take apart a two handle bathroom faucet?
0:484:49How to Repair a Leaky Two-Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you determine the trouble stem you'll need to turn off the water. Next remove the handle with aMoreOnce you determine the trouble stem you'll need to turn off the water. Next remove the handle with a Philips head screwdriver. So that the stem is visible.
How do you change a stem assembly on a Delta faucet?
0:326:00How to change the stems, seats and springs in a Delta Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can see the hole. In the handle here that's where my allen key is going to go in. And there's aMoreYou can see the hole. In the handle here that's where my allen key is going to go in. And there's a Allen nut that I have to loosen there once I get that loosened up the handle should pull straight up
How do you remove the handle on a delta bathroom faucet?
0:128:33Delta Faucet Handle Removal Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd to remove this what you have to do is you have to turn the water off to the faucet. And then youMoreAnd to remove this what you have to do is you have to turn the water off to the faucet. And then you're gonna remove the handle. Just by unscrewing it and then underneath here there's a set screw.
How do you remove a Delta shower handle with threaded bonnets?
0:002:08remove stuck bonnet nut (easy way) - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust enough for a flathead screwdriver to get a good grip a nice wide flat head screwdriver. And getMoreJust enough for a flathead screwdriver to get a good grip a nice wide flat head screwdriver. And get it in there at a nice sharp angle. And wrap it a couple times with a hammer.
How do you remove a Delta faucet without screws?
You can use an allen wrench (also called an allen key) to remove it. Once you've done that, you can typically just lift the faucet handle off. However, if it has a cartridge inside, you may need to unscrew a top piece as well to be able to remove the cartridge.
How do you remove a Delta single handle shower faucet?
5:156:28How to Replace a Delta Tub or Shower Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake off the knob cover and remove the screw holding on the temperature. Knob. Use an allen wrenchMoreTake off the knob cover and remove the screw holding on the temperature. Knob. Use an allen wrench to loosen the set screw and remove the handle assembly. Take off the trim sleeve.
How do you take apart a Delta shower head?
0:002:11How To Change A Showerhead by Delta - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust remove the old shower head by turning it counterclockwise. If you can't do it by hand use anMoreJust remove the old shower head by turning it counterclockwise. If you can't do it by hand use an adjustable wrench. Make sure the shower arm doesn't turn inside the wall.
How long does water run in a faucet?
The water needs to run for one minute. For kitchen & bathroom faucets, be sure to put a bucket upside down over top of the faucet in order to direct the water down to the sink, or water will spray everywhere. Turn the water off at the supply lines again before re-assembling. 8.
Do you need an adjusting ring for a faucet?
Depending on the age of your faucet, you may not have an adjusting ring. For those with newer faucets that don’t contain adjusting rings, please skip this step. If you have an older faucet with an adjusting ring, it will not be needed after the repair if the cam/packing is replaced.
What is a delta faucet?
Delta bathroom and kitchen faucets with two handles often are stem-style faucets that include a neoprene valve seat and spring that fits into the faucet below a cartridge-like insert stem. This is different from a true cartridge-style faucet, which closely resembles a stem faucet but does not have valve seats and springs.
How to tell if a faucet is leaking?
Determine Which Side Is Leaking. Place your hand under the drip from the faucet. If the water is warm, the leak is most likely on the hot side of the faucet. If the water is cold, the leak is most likely on the cold side. This tells you which is the better side to fix first, but it's possible that both sides are leaking in any case.
What is a stem style faucet?
With a stem-style faucet, a neoprone valve seat and spring fits into the water inlet port in valve body. Over the valve seat and spring, the stem is held into the body with a bonnet nut; the handle then fits onto the top of the stem. Leaks in this type of faucet usually can be fixed with a new neoprene valve seat and spring.
How to remove valve seat and spring?
Remove the seat and spring by inserting a small screwdriver or Allen wrench into the hole of the seat and pulling up both parts together. Note the spring's orientation inside the valve seat. The spring should be slightly larger in diameter at the bottom than at the top—where it fits into the seat.
How to replace a valve stem?
If desired, you can also replace the O-ring (which is sometimes included with stem-and-spring kits) or the entire stem. Fit the stem into its housing, aligning the tabs on the stem with the slots in the housing. Push the stem all the way down until it stops.
How do I shut off the water in my kitchen sink?
The valve may have a small football-shaped handle or a lever or knob. Turn the handle clockwise until it stops. Open the hot or cold faucet, as appropriate , to make sure the water is off.
Where is the valve seat on a faucet?
Look inside the stem housing and locate the neoprene valve seat sitting in a hole at the bottom of the faucet housing. The valve seat is a small, black, rubber cap with a hole in the top. Sitting inside and below the seat is a small metal spring.
