Repairing Guides

how to repair a dent in a wall

by Randy Tremblay Published 3 years ago Updated 2 years ago
image

  1. Buy a drywall patch kit from the hardware store. Most kits come with a stencil and a drywall patch that you can cut to match the size of your ...
  2. Use the stencil to cut a hole around the dent. Grab your drywall patch stencil and use a pencil to draw a circle around the dent.
  3. Grab a putty knife and scoop up a thick glob of drywall mud. ...
  4. Attach the patch to the wall with more drywall mud. Grab your drywall patch and place it over the hole in the wall.
  5. Wait for the area to dry, then sand the wall. Drywall mud usually takes about 24 hours to dry. ...
  6. Paint the wall to match the color. Pick up a gallon of paint that matches your wall color exactly. ...

Part of a video titled How to Fix a Ding in Drywall : Wall Repair - YouTube
0:20
1:23
It's fairly simple to fix take a little bit of your joint compound. And work it right into thatMoreIt's fairly simple to fix take a little bit of your joint compound. And work it right into that joint. And put it right over your dent. And you don't want to take it and just wipe it real smooth.

Full Answer

How can I repair a small dent in my wall?

Method 1 Method 1 of 2: Small Dents

  1. Smooth on drywall mud with a putty knife. Pick up a tub of drywall mud and grab a putty knife from the hardware store.
  2. Apply a plaster grid for reinforcement. Buy a sheet of plaster grid and cut out a small square, just large enough to cover the dent.
  3. Cover the plaster grid with more drywall mud. ...
  4. Wait for the putty to dry. ...

More items...

How do you repair a dent in dry wall?

Drywall is vulnerable to cracks, dents and holes, but you can easily repair it with drywall joint compound and a little sanding and painting. This guide will teach you how to patch drywall, whether you need to know how to fill in a small dent or how to fix a hole in the wall.

How do you fix a dent in drywall?

Nicks and dents that don't break the drywall paper

  1. Make an indentation. Using the butt end of a six inch drywall knife, gently press the gypsum on and around the damaged area to create a slight ...
  2. Step -2 Check the indentation. Using the metal blade of a six inch drywall knife as a straightedge, check that the entire damaged area is slightly recessed relative to the ...
  3. Fill with spackle. ...

More items...

How to fix nail holes in your wall?

The Right Way to Fill Nail Holes

  1. Sand the surface. Prepping properly before you even start spackling is key to removing all traces of former holes. ...
  2. Choose the right hand tools. For a small-scale spackling job, you’ll need to select a putty knife with a little bit of give in its blade, like HYDE’s ...
  3. Select and spread the compound. ...
  4. Apply a second layer of compound. ...

More items...

image

How do you fix a dent in drywall?

Sand the edges surrounding the cut-away dent area for better surface adherence. Next, prime the dented spot with a paintbrush to seal this portion of drywall. Then, with your putty knife, apply a small amount of joint compound to fill the dent. Feather the edges to blend the new compound with the rest of the wall.

Is it easy to fix dent in wall?

Fortunately, fixing a dent in your wall isn't tough, and you can DIY it with only a few tools and an hour of labor. Keep reading to learn how you can patch a small dent that's less than 1⁄2 in (1.3 cm) wide or a large dent that's more than 1⁄2 in (1.3 cm) wide all on your own.

How do you fix dips in the wall?

1:4815:47How To Fix A Dip In A Wall! [THE HOUSE THAT KEEPS GIVING]YouTubeStart of suggested clipEnd of suggested clipAnd it tucks. About an inch behind the drywall that was left behind. Now what i want to do is pullMoreAnd it tucks. About an inch behind the drywall that was left behind. Now what i want to do is pull this 2x4. Out at the bottom before i screw it so that when i put the new piece of drywall.

How do you repair dents and gouges in drywall?

How to Fix a Gouge in DrywallTrim any broken pieces of drywall and rough shredded edges from the gouge with a utility knife. ... Smooth patching compound over the gouge, forcing it into the opening with the putty knife. ... Cover the gouge with a piece of drywall tape, pushing it into the compound so it adheres.More items...

What household items can fix a dent in the wall?

Squeeze a small amount of white toothpaste into the hole and smooth over the surface using a putty knife or index card. White bar soap can be used in a similar fashion. Dampen the bar of soap and rub it over the hole until it is filled. Use an index card to remove the excess material.

How do you fix a dent in the wall before painting?

How About Dents?Simply apply joint compound with a putty knife over the dent so that the mud is filling in the dent and is flush with the wall.Sand lightly when dry.If you can't feel the dent when you rub your hand lightly over the wall, then you're finished. ... Apply primer.Paint.

How do you fix an uneven wall without plastering?

They require varying DIY skills but are all great for hiding cracks and imperfections, ready for painting.Use a joint compound instead of plaster. ... Sand your walls down with sandpaper. ... Use wall lining paper. ... Try the dabbing and dotting technique. ... Add wall paneling. ... Just paint your walls as they are.

How do you smooth out uneven walls?

1:102:24Spackling an uneven wall -- step by step - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe trick is to apply a lot of pressure on the left-hand side of the knife and no pressure on theMoreThe trick is to apply a lot of pressure on the left-hand side of the knife and no pressure on the right. Side. This will help you spread the spackle evenly and prevent any ridges. Forming.

What causes dents in drywall?

Dented Corner Bead Regular wear and tear of that corner can cause damage, denting the corner bead. This can be anything from using a vacuum cleaner to moving items around yours house carelessly. You can do drywall repair by using a hacksaw and cutting about 2 inches above and below the damaged spot.

How much does it cost to fix a dent in the wall?

In general, if the hole can be covered with what's referred to as a "patch," the repair will be a flat rate. The most expensive part of the project is the labor. For minor repairs, expect to pay an average of $60 to $90 per hour for handyperson repair, or about $50 to 75 per square foot.

How does toothpaste fix dents in walls?

Method 1: Fix a Hole in the Wall with Toothpaste Look no further than your bathroom's medicine cabinet. Believe it or not, toothpaste works wonders. When the paste dries, it forms a finish similar to spackle. Just squeeze the white paste (not the blue gel) into the hole, and smooth it over with a putty knife.

How do you fill a drywall gouge?

0:013:12How to Patch Drywall | The Home Depot - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor small holes and dents use a putty knife or your finger to fill the hole with lightweight.MoreFor small holes and dents use a putty knife or your finger to fill the hole with lightweight. Spackling.

How much does it cost to fix a dent in the wall?

In general, if the hole can be covered with what's referred to as a "patch," the repair will be a flat rate. The most expensive part of the project is the labor. For minor repairs, expect to pay an average of $60 to $90 per hour for handyperson repair, or about $50 to 75 per square foot.

What causes dents in drywall?

Dented Corner Bead Regular wear and tear of that corner can cause damage, denting the corner bead. This can be anything from using a vacuum cleaner to moving items around yours house carelessly. You can do drywall repair by using a hacksaw and cutting about 2 inches above and below the damaged spot.

How do you patch a hole in the wall?

0:331:48How To Fix a Hole in the Wall - YouTubeYouTubeStart of suggested clipEnd of suggested clipThese plaster patches are super easy to attach. You simply peel off the back and stick it onto theMoreThese plaster patches are super easy to attach. You simply peel off the back and stick it onto the wall. Just smooth down the edges even grab your spatula to make sure it's really smooth.

How do you fix a small hole in the wall?

2:533:56How to fix small holes in drywall - YouTubeYouTubeStart of suggested clipEnd of suggested clipOut you can use the putty knife to scratch off the surface. Area if it's a nail use a hammer to pushMoreOut you can use the putty knife to scratch off the surface. Area if it's a nail use a hammer to push it back in so that it's flush with the wall.

How To Fix A Dent In The Wall – 7 Steps

As you’re probably aware now, fixing the dents in your wall is beyond just aesthetic ventures. However, that doesn’t mean you want a shoddy, patchwork job when you do get to fixing them. Fixing a dent in the wall might not be incredibly difficult, but there is some detail to it — particularly when you want a clean finish.

How Much Does It Cost to Fix a Dent in the Wall?

Oftentimes, knowing how to fix a dent in the wall is not enough to actually get your project started. You also need to have an idea of exactly how much the project will cost before you take it up.

Takeaway

And there you have it! Now that you know at least the basics of how to fix a dent in the wall, you have better control over how your walls look, furniture clashes, or otherwise.

How to fill in a dented wall?

Fill in the dented area. Hold the knife at a 45-degree angle to the wall, scrape off the excess compound and feather out the edges. This technique blends the outer edges of the compound with the surrounding wall. Allow the compound to completely dry.

How to fill a dented wall with drywall compound?

Scoop out a small portion of drywall compound with a 6-inch putty knife and apply a thin coat of compound. Fill in the dented area. Hold the knife at a 45-degree angle to the wall, scrape off the excess compound and feather out the edges. This technique blends the outer edges of the compound with the surrounding wall. Allow the compound to completely dry. This may take several hours depending on the humidity level and air temperature.

Why use drywall compound?

Use a lightweight drywall compound because it dries faster and is easier to sand. Drywall compound shrinks as it dries. Deep dents or gouges may require more than three thin coats of the compound. Related Articles. How to Fix Wall Dimples. How to Fix a Gouge in Drywall. How to Fix a Gash in the Wall.

How to sand a flat surface?

Wear a dust mask and lightly sand the area smooth and flat using a sanding sponge. Wipe away any dust with a clean rag. Apply a second and third coat of compound in a similar fashion. After the final sanding, hold a bright light close to the repaired area to check your work. If you notice any imperfections, apply another coat of compound, allow it to dry and sand.

Can drywall be repaired?

Before you know it, the drywall has an ugly dent. You might temporarily hide the damage with a piece of furniture , but sooner or later the drywall will need to be repaired.

Small Dents and Dings

Scrape away loose debris from the hole. Cover the hole or dent with fast-drying spackle to bring the spackle level with the drywall surface and let it dry 24 hours -- or the time recommended by the manufacturer’s instructions. Sand smooth.

Popped Nail Heads

A popped nail isn't holding in the stud and backs out of the drywall, creating a popped nail head.

Small Holes

For small holes, like those created by a doorknob, a patch kit may be used.

Large Holes

For holes larger than 6 inches, you'll create a drywall patch with a different attachment method for the repair.

Corner Bead Patch

Corner bead is used where two pieces of drywall meet to form a corner. Corner bead is available in a variety of materials, including metal, paper and vinyl.

Finish the Repair

You're almost done. Here's where you make it look like nothing happened.

Repair Textured Drywall

Textured drywall is a bit more complicated, but still pretty simple to repair.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9