Here’s how to repair a shower diverter in seven simple steps:
- Turn off the water supply to your shower.
- Seal off your drain with tape so that small screws or other important parts are not lost down the drainpipe.
- Tighten the screws behind the faceplate of the diverter valve. If you attempt this fix but the water continues to pour or leak slowly from the bathtub spout after the ...
- Disassemble the shower diverter. If your diverter has a rotating valve, unscrew the nut at the stem of the diverter and remove the entire valve. ...
- Replace the diverter. To be sure you purchase the correct replacement, bring your old diverter with you to the store.
- Install the new diverter, making sure that the parts do not cross-thread each other. Use a wrench to tighten the diverter, being cautious not to overtighten it. ...
- Turn the water supply back on. Engage the shower diverter, directing the water flow to the showerhead. ...
How to repair a Moen Mixing valve for a shower?
- M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets
- When using 2 showering devices, the valve has 2 independent and 1 shared functions
- When using 3 showering devices, the valve has 3 independent and 3 shared functions
How often should you replace the shower valve?
- To put in a new shower valve, you’ll first need to remove the old one from inside your shower.
- To gain access, cut out a section of drywall approximately a foot square on the other side of the wall from your shower valve.
- To locate the valve, drill a pilot hole or two from the bathroom side next to the valve with a long bit.
How to repair a toilet water cutoff valve?
Repairing the Valve Stem
- Locate the main water shutoff valve in your home and turn it to the "Off" position. Open some faucets in the home to drain the lines of water.
- Turn the toilet cutoff valve to its "Off" position.
- Place the jaws of the pliers around the packing nut on the valve and turn the valve counterclockwise until it pulls free from the supply pipe.
How to repair a valley shower faucet?
- Stainless steel construction provides strength and durability
- Designed for hot and cold water applications
- Repairs 1 Valley faucet stem
- Includes (3) O-rings, (2) seats and (2) springs
- Compatible with Valley faucets
- Complies with the reduction of lead in drinking water act
How do you fix a shower diverter valve?
0:497:49How to repair replace 3 way Shower Faucet Diverter - FAST & EASY!YouTubeStart of suggested clipEnd of suggested clipSet the screw in a safe location. And we can pull the cap off now see how easy that was chances areMoreSet the screw in a safe location. And we can pull the cap off now see how easy that was chances are yours might not be that easy yours might be very rusted corroded and oxidized.
What causes shower diverter not to work?
The most common issue with a shower diverter is when water comes out of both the tub faucet and the showerhead. Check to be sure there is no residue clogging the shower diverter lever from fully lifting or lowering. If everything looks clear, the problem could be worn-out parts in the shower diverter valve.
How do you replace a shower diverter?
0:155:20How to replace a spout diverter if your shower pull stopped workingYouTubeStart of suggested clipEnd of suggested clipAnd then turn it counterclockwise while pulling away from the shadow wall continue to turnMoreAnd then turn it counterclockwise while pulling away from the shadow wall continue to turn counterclockwise until the spout is completely removed. You may need to remove the plumber's tape.
How do you fix a shower spout and diverter?
0:004:12Bathtub Spout with Diverter Replacement. Fix Leaking Tub SpoutYouTubeStart of suggested clipEnd of suggested clipAnd you want to want to scrape that and break that seal off of the edge of the spout. Then what you'MoreAnd you want to want to scrape that and break that seal off of the edge of the spout. Then what you're gonna want to do is come and look underneath the spout. And if there's any sort of screw.
How do I know if my diverter valve is bad?
Among the most noticeable signs that the air diverter valve is damaged is your car running sluggishly. The air/fuel mixture of your car is very important in keeping it running smoothly. Having a bad air diverter valve will throw this mixture off and cause the car to run and idle rough.
Can a tub diverter be repaired?
Once you've determined that your shower diverter is broken, don't delay in repairing it. Though it might be an easy task to put off, a broken shower diverter wastes water and creates a poor shower experience. Repairing a shower diverter is a home improvement project that you can complete in just one day.
How much does it cost to replace a shower diverter valve?
Replacing a shower diverter valve costs $225 to $575, including materials and labor. A shower diverter valve switches the flow of water between the bathtub spout or shower head and is typically controlled by a small handle located on the center trim plate or near the tub spout.
Do you need to turn off water to replace shower diverter?
If you're only working on the diverter, you don't need to turn off the water supply to the faucet. While working, place a cloth over the tub drain to prevent any dropped screws from going down the drain. Some showers use a diverter built into the tub spout activated by lifting a button on the spout.
How much does it cost to fix a shower diverter?
Typically, it costs between $150 and $500 to fix a leaky or dripping faucet, depending on severity of the leak. Repairing a broken diverter will cost you around $125 on average.
How do you replace a diverter valve?
Diverter Valve on a SpigotUnscrew the set screw. See how the spigot is attached to the wall. ... Unscrew spigot from the wall. Be careful! ... Wash Supply Pipe. Make sure that you clean off any bits of gunk from the supply pipe. ... Replace new spout on the copper pipe. ... Test it and make sure it works!
How do you fix a bathtub diverter?
0:143:21Repair Leaking Tub Spout Diverter Pull in Shower Mode - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd pulling up on the diverter. Knob once that comes off all of the parts will come loose. So we'llMoreAnd pulling up on the diverter. Knob once that comes off all of the parts will come loose. So we'll take a look inside the tub spout in a little bit but first let's check out the washer.
How much does it cost to replace shower diverter?
Replacing a shower diverter valve costs $225 to $575, including materials and labor. A shower diverter valve switches the flow of water between the bathtub spout or shower head and is typically controlled by a small handle located on the center trim plate or near the tub spout.
How do you fix a shower diverter that won't stay up?
0:041:17Shower Repair : How Do I Repair the Diverter in a Shower? - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat you'll take your new one once you get the new one it slides into place use that same allenMoreThat you'll take your new one once you get the new one it slides into place use that same allen wrench lock that screw back in place now on a three handle tub and shower valve.
Do I need to turn the water off to change a shower diverter?
If you're only working on the diverter, you don't need to turn off the water supply to the faucet. While working, place a cloth over the tub drain to prevent any dropped screws from going down the drain. Some showers use a diverter built into the tub spout activated by lifting a button on the spout.
What is a shower diverter?
A shower diverter is the mechanism that reroutes the water from your bathtub faucet to your showerhead. Many shower diverters are controlled by a pin knob that you pull, but there are many types. Maybe yours is turned on with a button or with a third faucet handle between the bathtub’s hot and cold knobs.
How to replace a diverter?
Replace the diverter. To be sure you purchase the correct replacement, bring your old diverter with you to the store. Install the new diverter, making sure that the parts do not cross-thread each other. Use a wrench to tighten the diverter, being cautious not to overtighten it.
Why is my shower diverter not working?
If, after you trigger your shower diverter, water continues to leak out of the bathtub spout rather than the showerhead, the shower diverter is not working properly. This could mean that the inner rubber stopper isn't creating a good seal to fully block and redirect the flow of water, or it could be another problem.
How do I fix a leaky bathtub drain?
Seal off your drain with tape so that small screws or other important parts are not lost down the drainpipe. Tighten the screws behind the faceplate of the diverter valve. If you attempt this fix but the water continues to pour or leak slowly from the bathtub spout after the shower diverter has been engaged, move on to the next step. ...
How to contact Mr Rooter?
Call Mr. Rooter at (855) 982-2028 or request an estimate today. With your newly upgraded bathroom fixture, consider making improvements to the rest of your bathroom. Contact your local Mr. Handyman for bathroom upgrade help. Their professionals can help you save space and improve your bathroom overall.
Can you turn on a shower when the diverter breaks?
Turning on your shower should be as easy as the flip of a switch. But when your shower diverter breaks, taking a shower is not so easy—water continues to pour from your tub’s faucet after you’ve switched the diverter. Luckily, repairing a shower diverter is quick and fairly simple.
How to make sure water is coming out of shower head?
1. Start this process by ensuring that the water is coming out of the tub faucet and not the shower head. Although it is not necessary to turn off your water supply, you want to make sure that if water does start coming, you don’t get soaked in the process! 2.
What tool to remove a screw from a faucet?
2. Note that the tool to remove the screw could be an Allen Wrench, Flat Head Screwdriver, or a Phillips Head Screwdriver. 3.
How to remove a knob from a sandbox?
Start by removing the knob. Find the screw, if not visible it is located under the plastic button which will need to be popped off using a small flathead screwdriver. 1. Once the knob has been removed, use your hand or a handle remover to remove the base.
Is it bad to have a shower faucet leaking?
It is never a good thing when your shower tub faucet starts leaking, but it is a good thing when you know what to do to fix it! As long as you have the time, tools, and parts for the job you can definitely learn how to fix shower diverter all on your own!
How long does it take to replace a shower diverter valve?
How to Replace a Shower Diverter Valve in 10 Minutes. If you have a shower-bathtub combination in your bathroom, you then surely have a shower diverter which as its name suggests diverts water to the shower head from the tub spout and back to the spout when needed.
How to tell if shower diverter is bad?
The signs of a bad shower diverter are a leaking bathtub faucet when the shower is on, not enough hot water, unbalanced/irregular water flow, sticky handle/knob or a sudden gash of hot water when someone flushes the toilet or runs another appliance.
How many handles does a shower faucet have?
Double handle shower faucet. Here you will have 2 shower faucet handles, one for the cold water and the other one for the hot water. You will also have a pull-up shower diverter at the top of the bathtub spout. Three handle shower faucet.
What is an escutcheon on a valve?
An escutcheon is the trim plate which hides the valve opening on the wall. The escutcheon will either be threaded on the valve stem or held in place using a retaining nut. Before attempting to remove the escutcheon, check if it is caulked to the wall. If it is, cut through the caulk with a putty knife.
What is the middle handle of a shower?
As I had mentioned earlier, the middle handle/valve is usually the shower diverter valve. Water flows from both the hot and cold faucet valve and when it reaches the shower diverter it flows either to the bathtub spout/spigot or shower head depending on the position of the valve.
Why does my shower head not have a spout?
When the rubber washer is in contact with the valve seat, a watertight seal is created allowing water to flow to the shower head but not tub spout. With the time, due to the friction between the rubber washer and the valve seat, the washer starts to wear out, failing to seal properly.
How to check if a shower head is leaking?
Turn on the water and divert it to the shower head and check if the pressure and temperature are good. Check if the bathtub spout is leaking with the shower turned on. Divert the water to the tub spout and check as well if everything is at it should.
How To Know If Shower Diverter Valve Is Broken?
Shower diverters are important plumbing pieces that help regulate where the water in your shower goes. If this part of the system is broken, it can lead to some costly and unpleasant surprises later on. To check if a problem with your shower diverter valve has occurred, take a look at these symptoms:
How to Repair Your Shower Diverter
Step 1: Turn off the water supply to your shower diverter valve. This can be done by turning off the shutoff valve that is located on or near it or unscrewing a hose from its inlet and outlet ends. Making sure there’s no pressure coming out of this part of the system will help you avoid any possible further harm while working with it.
How To Replace a Shower Diverter Valve
If your shower diverter valve is broken, the best way to fix it will be by replacing it. This can be done in as little as an hour and with just a few easy steps that are outlined below!
Final Words
If you found this article helpful on how to repair your shower diverter, please share it with your friends and family. We know that when a shower diverter gets clogged or broken, the last thing on one’s mind is how to fix it.