Just take a fine metal hand file and lightly file the area of the dented blade on the bottom of each blade, the sides of the blades that face each other. When you do one blade, just flip the trimmer over and do the other blade the same way. That should eliminate the problem and let the blades close all the way again.
Full Answer
Why choose Fiskars tree trimming tools?
Get all the reach you need with tree trimming tools designed to cut back high, hard-to-reach branches – no ladder, no chainsaw, no tree service. Built to last, every Fiskars tree pruner is designed for easy handling, with an aggressive saw or pruner blade attached to the end for powering through thick branches, quickly and easily.
Are there any recalls on Fiskars pole saws?
This recall involves Fiskars 16 foot extendable pole saw/pruners with model numbers 9463, 9440 and 9441. These pole saw/pruners are lawn and garden tools that extend from 7 feet to 16 feet and are used to cut high tree branches with either their pruner (for smaller branches) or their 15-inch hooked wood saw blade (for larger branches).
How do I care for my Fiskars tools?
All Fiskars tools have low friction coating that helps prevent rust and buildup of sap or other substances. This coating makes cleaning a simple task, as soap and water will effectively clean the tools. 2. Dry the tools carefully to prevent moisture build up which can cause tools to rust.
How high can a friskars pole Trimmer cut a tree?
Friskars pole trimmers come in several models, but all allow safe tree pruning from 15 to 18 feet high from the ground. Trimmers feature adjustable or two-piece poles with a remote lopper on one end.
How do you restring a Fiskars Tree pruner?
0:001:43How to string a Fiskars Tree Trimmer extendable pole - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll right so here's the situation on my tree trimmer. The rope broke so the way it works is you haveMoreAll right so here's the situation on my tree trimmer. The rope broke so the way it works is you have to tie it off at the top here you're going to go over this one you're going to come under.
How do you replace the cord on a tree pruner?
How to Retie the Rope on a Tree PrunerRemove the old rope from the pulleys and anchor. ... Tie the end of a new rope to the anchor eye on the pole or grommet at the end of the moveable blade, depending on your pruner's design. ... Pass the other end of the rope up or down to the next pulley.More items...
How do you repair a pole pruner?
4:578:09The pole pruner- use and repairing - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe have the pole pruner without any any rope attached to it and what it consists of is these twoMoreWe have the pole pruner without any any rope attached to it and what it consists of is these two little wheel pulley systems and what we're going to do is to reattach.
How do you change a Fiskars Pruning Stik head?
Remove the head from the pole by swiveling head to the position shown and tapping the head out gently with a rubber mallet or a piece of soft wood. Remove the strap from the old head and pulley. Detail of the strap inserted through the pulley.
How do you use Fiskars Power Stroke?
6:419:04Fiskars Powerstroke Pruner / Pruning Preference Talk & Japanese Maple ...YouTubeStart of suggested clipEnd of suggested clipThere. Here is the mechanism all you do hold that handle there you're gonna it's got a little kindMoreThere. Here is the mechanism all you do hold that handle there you're gonna it's got a little kind of a ball here at the bottom.
Does the Fiskars UPX82 extend?
Product Description. The Fiskars UPX82 PowerGear X Tree Pruner is a 1.65m long, non-extending pole pruner with a bypass-style secateur blade for clean cuts on live branches or stems up to 32 mm (1-1/4”) thick, providing approximately 3,5 meters of maximum reach.
How do you assemble a Fiskars pole saw?
3:235:58Fiskars PowerLever 1-1/8 in. Cut 15 in. Fiberglass Pole 14 ft. REVIEWYouTubeStart of suggested clipEnd of suggested clipOnce you have the desired angle. You then put the not back on there. And make sure that it's in oneMoreOnce you have the desired angle. You then put the not back on there. And make sure that it's in one of those positions. That you desired for the blade and you just turn this clockwise.
How do you sharpen pole pruners?
1:376:57Pole Saw Blade Maintenance - Prune Like a Pro - YouTubeYouTubeStart of suggested clipEnd of suggested clipFile. We're going to sharpen the backside of the tooth. Each tooth so we're going to come in matchMoreFile. We're going to sharpen the backside of the tooth. Each tooth so we're going to come in match that angle we've got it secured in a vise. So it's nice and firm. And takes a couple of strokes.
What is the rope for on a pole saw?
When professional arborists drop a large piece of wood, they use ropes in a pulley system to safely slow its descent to the ground. When you cut branches with pole saws and pruners, you can't do that; you have to let the wood drop uncontrolled. High or heavy wood can damage, hurt, and kill when it falls.
How do you use Fiskars up86?
0:003:39Fiskars UP86 Tree Pruner Revisited - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you've extended the pole. The head the cutting part there's a locking off point you can adjustMoreOnce you've extended the pole. The head the cutting part there's a locking off point you can adjust the angle. Where you need to be once you've adjusted it lock off as simple as.Fiskars UP86 Tree Pruner Revisited - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you use Fiskars up86?
How do you use Fiskars upx86?
0:563:00Fiskars UP86 Telescopic Tree Pruner - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll that part like this. This is the pulling part these actually pull and then slop. And it's asMoreAll that part like this. This is the pulling part these actually pull and then slop. And it's as simple as that and it does work if you look at it fold. All the way back in.Fiskars UP86 Telescopic Tree Pruner - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you use Fiskars upx86?
How do you tighten Fiskars secateurs?
10:3312:38Fiskars Pruner: Clean Oil Sharpen - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut you can do two screwdrivers and tighten that down though and then the nut is tight now that nutMoreBut you can do two screwdrivers and tighten that down though and then the nut is tight now that nut tension will provide some feedback here.Fiskars Pruner: Clean Oil Sharpen - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you tighten Fiskars secateurs?
What is the rope for on a pole saw?
When professional arborists drop a large piece of wood, they use ropes in a pulley system to safely slow its descent to the ground. When you cut branches with pole saws and pruners, you can't do that; you have to let the wood drop uncontrolled. High or heavy wood can damage, hurt, and kill when it falls.
How do you use a long handled tree trimmer?
2:444:35Using A Long Handled Saw for high pruning - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou see just by pulling the blade. Across cuts the branch off fairly. Effortlessly. Make quite a bigMoreYou see just by pulling the blade. Across cuts the branch off fairly. Effortlessly. Make quite a big impact. And short time some branches you need to give their larger you need to cut underneath.
How do you use Fiskars upx86?
0:563:00Fiskars UP86 Telescopic Tree Pruner - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll that part like this. This is the pulling part these actually pull and then slop. And it's asMoreAll that part like this. This is the pulling part these actually pull and then slop. And it's as simple as that and it does work if you look at it fold. All the way back in.
How do you use Fiskars up86?
0:003:39Fiskars UP86 Tree Pruner Revisited - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you've extended the pole. The head the cutting part there's a locking off point you can adjustMoreOnce you've extended the pole. The head the cutting part there's a locking off point you can adjust the angle. Where you need to be once you've adjusted it lock off as simple as.
How to get Fiskars tools ready for winter?
1. The first step in getting tools ready for the winter is to clean them thoroughly. All Fiskars tools have low friction coating that helps prevent rust and buildup of sap or other substances. This coating makes cleaning a simple task, as soap and water will effectively clean the tools. 2.
Do you sharpen Fiskars blades?
3. It's now time to sharpen the blade. Fiskars products are made from hardened steel, which allows the blades to slice through materials all season long and stay sharper longer. Even so, sharpening blades at the end of each season will ensure the longevity of tools. Flat files are excellent to sharpen the blades on these Fiskars tools. Make sure when sharpening to do so at the same angle as the blade, and if there are any cuts or notches on the blade, take extra care to file those out as well.
What is a Fiskars tree pruner?
Built to last, every Fiskars tree pruner is designed for easy handling, with an aggressive saw or pruner blade attached to the end for powering through thick branches, quickly and easily.
What Are Tree Pruners Used For?
Tree pruners are needed for removing high branches that regular loppers simply cannot reach.
What Are Gardening Tool Replacement Parts Used For?
Our tools are made to last through normal wear and tear. However, any blade edge will dull over time with heavy use. Increase the longevity of your tools by replacing garden tool parts, rather than whole tools.
Get inspiration & product updates
By subscribing, you agree to the terms and conditions and our privacy policy .
How high can a Friskars pole trimmer be?
Troubleshoot, Fix and Repair. By Laura Reynolds. Friskars pole trimmers come in several models, but all allow safe tree pruning from 15 to 18 feet high from the ground. Trimmers feature adjustable or two-piece poles with a remote lopper on one end. Several pole trimmers have a pruning saw to handle larger branches.
How to cut branches with two pulleys?
Two pulleys give the blade the mechanical advantage it needs to cut branches up to 2 inches thick. Use a screwdriver or awl to push the rope through pulleys and untie knots.
How to pull rope around pulley?
Pull the rope through and into the slide around the bottom pulley. This time, thread the rope around the pulley from the pole side toward the outside.
How to secure rope on tree?
Thread the other end of the rope through the eye-bolts or other guides on the poles that keep the rope secure as you work on trees .
Can you use cotton laundry line on a pruning pole?
Cotton laundry line does just fine for restringing a limb pruning pole, or you can use a combination cotton-polyester designed for outdoor use. If you want to use a plastic rope, cauterize its ends with heat from a flame to keep it from unraveling. Take care to keep the flame far away from the rope to avoid setting it on fire.
Does Fiskars have a pruning saw?
Several pole trimmers have a pruning saw to handle larger branches. Fiskars sells replacement parts for all of the tool-ends of its pole trimmers and restringing the double-pulley pull rope is simple.
What is a Fiskars pruner?
This recall involves Fiskars 16 foot extendable pole saw/pruners with model numbers 9463, 9440 and 9441. These pole saw/pruners are lawn and garden tools that extend from 7 feet to 16 feet and are used to cut high tree branches with either their pruner (for smaller branches) or their 15-inch hooked wood saw blade (for larger branches). The blade is secured to an oval-shaped fiberglass and aluminum telescoping pole set that locks into place through a double-locking system consisting of two orange c-clamps and a black and orange lock and pin mechanism in each of the upper and lower pole assemblies. They have an orange and black pole. “Fiskars” is printed on the pole. The model number is printed on the UPC code on the pole.
What is the phone number for Fiskars?
Fiskars Brands toll-free at 888-847-8716 from 7 a.m. to 6 p.m. CT, or online at https://fiskarsliveagent.secure.force.com/FiskarsProductNotification/, or at www.fiskars.com and scroll to the bottom of the page and select Product Notifications.
How many reports of Fiskars poles separating?
Fiskars received two reports of the poles separating and falling. Two laceration injuries requiring stitches have been reported.
Why do pole saws fall down?
The telescoping poles of the pole saw/pruner can separate, causing the poles to come apart and fall down and the saw blade and pruner head to drop, posing a laceration hazard.
