how to repair a frost free sillcock outdoor faucet

• Right from where you have pulled out the old frost-free sillcock faucet, push in the new one.
• Move back to the inner side of the wall and wrap the backend of the new faucet with some pipe tape.
• Hold the end of the faucet with pliers and reattach to it the same water pipe which you detached from the old faucet.
• Open up the water valve that you closed before starting the project.
• Move back to the inside wall and see if there’s any leakage where you made the connection of the new faucet with the water pipe.
• Come back to the outside wall where the outlet of the outdoor faucet is.
• Screw it from both ends, back onto the wall of your house. ...
• Open the faucet and see if water comes out correctly.

How do I choose the best frost-proof sillcock faucet?

A frost-proof sillcock faucet (hose spigot) is an excellent choice in climates with freezing winter temperatures, since the faucet's design prevents water from remaining inside the faucet near the exterior wall, where it can freeze and split the faucet body. The parts of a frost-proof faucet can, however, wear out and require repair or replacement.

How do you fix a leaking frost-proof faucet?

A leaking frost-proof faucet can waste a lot of water, but fixes are simple, whether the problem is the faucet stem washer assembly, the vacuum breaker, or just a loose retaining nut. Complete DIY projects like a pro! Sign up for our newsletter! If you're lucky, you can fix your leaking faucet by simply tightening the nut under the handle.

Are there any problems with a frost proof faucet?

If you have a frost-proof faucet like the one we show here, check out these fixes for the most common problems. If the faucet leaks from around the handle just when the water is turned on, the stem packing may be leaking. In some cases, you can fix this by simply tightening the retaining nut that's under the handle.

Should I replace my sillcock or frost-proof hydrant?

Replacing an entire sillcock or frost-proof hydrant is not a beginner project and is best left to professionals. As with indoor faucets, by far the most common reason for leaking is a worn-out stem washer or cartridge.

How do you repair a frost free outdoor faucet?

2:4416:09How To Fix a Leaking Frost Proof Faucet | DIY Plumbing - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter you change it out put the cap. Back on. And if the leak was up here you've got it fixed. IfMoreAfter you change it out put the cap. Back on. And if the leak was up here you've got it fixed. If you put a vacuum breaker repair kit on it that was designed for yours.

How do you remove a frost free Sillcock outdoor faucet?

0:053:15How to Fix a Leaky Frost Free Sillcock / Outdoor Faucet video - YouTubeYouTubeStart of suggested clipEnd of suggested clipOff I'm going to take off the center screw. Then remove the handle. And then underneath this nut isMoreOff I'm going to take off the center screw. Then remove the handle. And then underneath this nut is a washer and a lot of times the problems in this washer.

How do you disassemble a silcock?

0:582:20Repair Frostproof Sillcock - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the packing nut is loose for our full turn model 72011 turn the handle counterclockwise. UntilMoreOnce the packing nut is loose for our full turn model 72011 turn the handle counterclockwise. Until the stem comes loose. And pull to remove the stem.

How do you change the stem on a silcock?

Sillcock Repair Tip:Remove sillcock handle, and loosen retaining nut with channel-type pliers. Remove stem. Replace O-ring found on retaining nut or stem.Remove the brass stem screw at the end of the stem, and replace the washer. Reassemble the sillcock.

How do you fix an anti-siphon valve on an outdoor faucet?

3:357:36How To Fix a Water Leak in the Anti Siphon Valve of an Outdoor FaucetYouTubeStart of suggested clipEnd of suggested clipYou can get you can get them online as well from Menards. So all we're gonna do is place that littleMoreYou can get you can get them online as well from Menards. So all we're gonna do is place that little plunger within the casing.

Why does my frost free faucet leak?

A leaking frost-proof faucet can waste a lot of water, but fixes are simple, whether the problem is the faucet stem washer assembly, the vacuum breaker, or just a loose retaining nut.

How do you take apart an outdoor spigot?

2:278:11How to Rebuild a Hose Spigot | Ask This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we're going to see just what's going on inside. So let's see if we can get this apart with someMoreAnd we're going to see just what's going on inside. So let's see if we can get this apart with some water pump pliers. For good measure i'm going to hold back with a wrench.

How do you replace a freeze proof Sillcock?

0:5010:27How Pro Plumbers Replace Frost Proof Faucets - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd mortar the wall. Inside in order to solder. Or are we going to be able to just unthread it andMoreAnd mortar the wall. Inside in order to solder. Or are we going to be able to just unthread it and change it out so anyway let's get started. Now i've got a couple of little chisels.

How do you repair a Woodford Sillcock?

2:113:03Woodford Model 17 - Outdoor Water Faucet Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake the new vacuum breaker body piece and tighten down with adjustable pliers to create a tight fitMoreTake the new vacuum breaker body piece and tighten down with adjustable pliers to create a tight fit by turning clockwise. Don't over tighten the new float as it could crack.

How do you replace an outdoor faucet stem?

0:073:59Repair Outdoor Faucet - traditional style - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe same you take out that lower nut and the entire stem. And handle will unscrew with it and on theMoreThe same you take out that lower nut and the entire stem. And handle will unscrew with it and on the bottom you can see the two nuts here yep. You've got a washer held in with the screw.

How do you remove a Sillcock handle?

Hold the faucet handle in place while using a Phillips head screw driver to remove the screw. Both the Sillcock and the Hose Bibb faucet's handles are held onto the faucet by one screw on top of the handle and directly in the middle. Turn the screw to the left to remove.

How do you replace an outside water shut off valve?

0:303:50How to Replace a Plumbing Shut-Off Valve | This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe ferrule goes on to the outside of the copper pipe. And the pipe fits right down into the valve.MoreThe ferrule goes on to the outside of the copper pipe. And the pipe fits right down into the valve. Now as this nut is tightened up onto those threads.

How do I loosen my outdoor faucet?

Loosen A Stuck Outside Water Faucet With These 5 TricksTurn it with a wrench.Heat it with a hairdryer.Brush it with a wire brush.Cover it with plumber's grease.Soak it with vinegar.

How do you remove an old hose bib?

0:412:29How to Replace a Hose bib On Outside of Your House - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow here's the important step you need two pairs of pliers two wrenches - something you need to holdMoreNow here's the important step you need two pairs of pliers two wrenches - something you need to hold or sustain back up this pipe and then grab the hose bib that you're taking. Off.

How far back does a frost proof faucet go?

The Design of Frost-Proof Faucets. Frost-proof faucets are designed so that the valve mechanism that seals off the water flow is located a full 12 inches or so back inside the house, away from the exposed exterior portion of the faucet. In older types of faucets, a long valve stem operates a rubber washer that compresses down against ...

What does it mean when a faucet is frost proof?

A frost-proof faucet can also have a hidden leak in the valve body. The symptom of this type of leak is reduced water pressure coming from the faucet. First, check to make sure that water pressure in other fixtures is normal, and that only the frost-proof spigot is affected. If the frost-proof faucet is the only one affected, ...

Why does my faucet leak?

The symptom of this kind of leak is when closing the handle fails to stop the flow of water , which usually continues to drip or flow in a slow trickle.

Where is the washer on a faucet?

Examing the washer and/or O-rings at the end of the faucet stem and replace them. The washer at the tip of the stem is usually secured by a brass screw. Reassemble the faucet, turn on the water, and test to make sure it no longer leaks. New faucets may use a cartridge mechanism located at the end of the valve stem.

Where is the packing cord on a faucet?

On older faucets that operate with compression washers, there is packing cord wrapped around the handle stem, just beneath the handle's mounting nut. If you see seeping around the threads of the handle mounting nut, this is the likely problem.

Do sillcocks have a vacuum breaker?

Newer frost-proof sillcocks also integrat e a vacuum breaker mechanism that prevents siphoning. This is now a code requirement, but older frost-proof faucets may not have this feature. Like any faucet, a variety of routine problems can cause a frost-proof faucet to leak.

Can a hose spigot freeze?

A frost-proof sillcock faucet (hose spigot) is an excellent choice in climates with freezing winter temperatures, since the faucet's design prevents water from remaining inside the faucet near the exterior wall, where it can freeze and split the faucet body. The parts of a frost-proof faucet can, however, wear out and require repair or replacement .

How to Repair a Leaky Frost-Proof Faucet

Here are step-by-step instructions for how to repair a frost-proof faucet that’s leaking from a worn-out O-ring or washer.

Final Thoughts

Trust us, repairing a frost-free faucet looks much more complicated than it actually is.

Call 1-Tom-Plumber

Don’t hesitate to contact us here or call us at 1-Tom-Plumber (1-866-758-6237) if you need help repairing or installing a frost-proof outdoor faucet.

How to fix a faucet that leaks from the handle?

In some cases, you can fix this by simply tightening the retaining nut that's under the handle. Remove the screw in the center of the handle and pull the handle off. Try tightening the nut slightly (Photo 1).

How do I fix a leaking faucet?

If you're lucky, you can fix your leaking faucet by simply tightening the nut under the handle. Don't crank it hard, though. If snugging it up doesn't solve the problem, turn off the water and remove the nut to repair the faucet.

What to do if your faucet starts leaking?

If you find that the faucet starts leaking again after a short time, the valve seat is worn and you should replace the entire frostproof faucet. If the faucet is attached with threads, you can simply turn off the water, unscrew the faucet and replace it with one that's the same length.

What happens if a faucet spout is leaking?

If your faucet still leaks, the stem may be leaking and you should replace the faucet. If your faucet leaks out of the spout when it's turned off, the washer is bad. On frost-proof faucets, the washer is located on the end of the long faucet stem.

Where is the vacuum breaker on a frost proof faucet?

Most frost-proof faucets have a built-in vacuum breaker located on top of the faucet (Photo 4). If you see water dribbling out from under the cap when the water is running, it's leaking. Photos 4 and 5 show how to replace a leaking vacuum breaker. Some repair kits include the parts for this.

Can a frost proof faucet leak?

A leaking frost- proof faucet can waste a lot of water, but fixes are simple, whether the problem is the faucet stem washer assembly, the vacuum breaker, or just a loose retaining nut.