How to Repair a Cuckoo Clock
- Make sure the train-weight chain isn't hitting any obstruction before you take the cuckoo clock down from the wall for repairs.
- Examine the case. Repair any obvious problems. ...
- Check to see if the cuckoo clock chain is on its sprocket. ...
- Put the train-weight chain back on the sprocket, if you don't hear it clicking. ...
- Listen to the bellows. ...
Full Answer
How to repair a cuckoo clock made in Germany?
Service Stations
- Black Forest Werkshop, Bruce MacDonald, 94 Spicer Ave., Groton, CT 06340-3627, Phone: 860 446 1645
- Miller’s Clock Service, 426 Broard St., Oshkosh, WI 54901, Phone: 414 235 4750
- The Clockmaker, Kenneth H. ...
- Roseville Clock Shop, 28085 Gratiot Ave., Roseville, MI 48066, Phone: 586 772 5180
Why is my cuckoo clock running slow?
Things to Consider Before Slowing Down a Cuckoo Clock:
- Cuckoo clocks operate on a pendulum mechanism that regulates the cuckoo’s speed pops out of the clock.
- Slowing down the pendulum will affect the timing of the cuckoo popping out.
- If you are not familiar with adjusting the pendulum on your cuckoo clock, it is best not to attempt to slow down your cuckoo clock.
Why is my cuckoo clock stopping?
Video 4: How to Fix a Cuckoo Clock When the Music Fails
- The wire does not release the fan fly after the cuckoo calls, so the music is not activated
- The wire touches the fan fly and the impact causes a chattering sound
- The wire does not hold the fan fly and the music plays at the same time the cuckoo calls. ...
How to fix your pendulum Issus on Your Cuckoo Clock?
you could try to just oil it a bit with good clock oil (lots of info on that on this board) but you might run into the problem that the old lubricant starts to gum up the new oil very quickly. Try tilting the clock in small increments---to the right---then to the left--and try swinging the pendulum. It may simply be out of beat! .
How do you fix an old German cuckoo clock?
3:256:13Repairing a cuckoo clock - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe bellows on the cuckoo I remove the old one there see there around where I'm gluing there thatMoreThe bellows on the cuckoo I remove the old one there see there around where I'm gluing there that hole that's the bellow forces the hole in there it comes out the whistle in the side.
What causes a cuckoo clock to stop working?
One of the most common reasons owners have issues with their coo coo clock stopping is that the mechanical movement of the cuckoo clock is not level. This generally happens when the cuckoo clock is not hung level or straight on the wall.
What to do if cuckoo clock stops working?
If your cuckoo clock still doesn't run, then it's time to move the minute hand. Set it back by half an hour, then immediately move it forward to the hour and allow for it to cuckoo. Afterward, set the pendulum so it swings again. In the event that it still doesn't run, try carefully and fully winding the weights.
How do you fix a cuckoo clock that doesn't cuckoo?
0:111:09Cuckoo not calling? - Cuckoo Clock Service Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf the cuckoo in your clock is not calling make sure that the little switch in front of the door isMoreIf the cuckoo in your clock is not calling make sure that the little switch in front of the door is turned to the side. The clock was being rapped correctly.
How do you get an old cuckoo clock to work?
1:082:26Cuckoo Clock not working - Cuckoo Clock Service Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake a wide screwdriver or something similar and bend the pendulum wire slightly to the left if theMoreTake a wide screwdriver or something similar and bend the pendulum wire slightly to the left if the clock is hanging too much to the right visually.
Can you Overwind a cuckoo clock?
It is impossible to overwind your cuckoo, however you may damage the chains if you continue to pull on them once the weights have reached the base of the clock. Regulating your clock. You can adjust your clock to run faster or slower.
What causes a pendulum to eventually slow down and stop swinging?
The pendulum stops eventually because of air resistance. The pendulum loses energy because of friction. Only in a theoretical situation when there is no friction the pendulum will oscillate forever.
How do I keep my pendulum swinging?
0:000:59Pendulum Not Swinging - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's a little magnet at the bottom make sure there's not a little piece of metal adhered to it.MoreThere's a little magnet at the bottom make sure there's not a little piece of metal adhered to it. Make sure that the the ribbon is not turned around on itself and keeping the arm from swinging.
What are the parts of a cuckoo clock?
On a cuckoo clock, two small wooden pipes are attached to two tiny wooden bellows on either side of the clock. Air fills the chambers, and the pendulum's movement activates the bellows, squeezing the air out of the whistles. The first bellow makes the “cu” sound, and the second bellow creates the “ckoo” sound.
Why won't the door on my cuckoo clock close?
Needs Oil. The cuckoo clock movement may need oiling at least on the arms that make the bird go in and out of its house. Also, it is good to put a drop of clock oil on the door hinges and the connections for the wire that goes from the bird to the door.
How much is my cuckoo clock worth?
Let's begin with the good news: if your Black Forest Cuckoo Clock is a genuine antique, you'll be thrilled to know that it could fetch anywhere between $150 to a cool $3,000; so checking its authenticity and features before you put a price on it would be one hugely-clever move!
How long should a cuckoo clock last?
How long do these clocks last? The movements in these cuckoo clocks are engineered to last at least 30 years. If you maintain them right, you will be able to pass them down to your kids or grandkids.
How do I keep my pendulum swinging?
0:000:59Pendulum Not Swinging - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's a little magnet at the bottom make sure there's not a little piece of metal adhered to it.MoreThere's a little magnet at the bottom make sure there's not a little piece of metal adhered to it. Make sure that the the ribbon is not turned around on itself and keeping the arm from swinging.
How do you reset the battery on a cuckoo clock?
To reset the battery-powered cuckoo clock, do the following:1) Remove the batteries.2) With your finger, gently and steadily rotate ONLY the minute hand clock-wise (it's very important you move it clockwise) until both the minute hand and the hour hand point to 12 o'clock.More items...
How do you balance a cuckoo clock?
1:595:09How to Set Up Your Cuckoo Clock - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou're going to want to tighten the distance in between here. So that the clock is snug up againstMoreYou're going to want to tighten the distance in between here. So that the clock is snug up against the wall so that it's not forward. So I put the cup. And then I adjust.
How high should I hang my cuckoo clock?
Please note that a cuckoo clock, because of the chains, needs to hang 1,8 -2,0 meters (6-7 feet) above the floor. This height is necessary to give maximum extension to the chains. Use a strong srew with a plug and fix it with a small angle into the wall.
Cuckoo Clock Repair Tips - How to Fix A Black Forest Cuckoo Clock
There are a lot of decisions to make before buying a Black Forest cuckoo clock. But once someone has finally chosena cuckoo clock style, movement,...
How Tofix A Cuckoo Clock - Common Timing Issues
One of the most common reasons owners have issues with their coo coo clock stopping is that the mechanical movement of the cuckoo clock is not leve...
Troubleshooting Cuckooclock Parts: #1 Cuckoo Call
One of the best parts of a Black Forest cuckooclock is the sound of the cuckoo. If the cuckoo bird is quiet, there are a fewcuckoo clock troublesho...
Troubleshooting Cuckooclock Parts: #2 Music Box
If your cuckoo clock is musical but not playing the music properly,there are simple cuckoo clock repairs to address this.First, you'll need to remo...
Troubleshooting Cuckooclock Parts: #3 Clock Hands
If the hands on the cuckoo clock are dangling,then they certainly need adjusting. Luckily, when it comes to troubleshooting cuckoo clock parts, cha...
How does a cuckoo clock work?
As the weights descend, they advance wheels inside the cuckoo clock. These wheels, in turn, move other gears that control the hands of the clock and also the cuckoo. The time itself is regulated by the movement of a pendulum. As the pendulum swings from side to side, it advances a wheel that controls the speed of the other gears. Often, repairing a cuckoo clock made in Germany can be as simple as adjusting the pendulum.
Can a cuckoo clock pendulum hit a wall?
Make sure the German cuckoo clock pendulum can move freely. The pendulum must not hit the wall, or the chains that hold the weights. The clock itself must also be completely level for the pendulum to swing correctly.
How to fix a cuckoo that calls the wrong time?
If the cuckoo calls the wrong hour (cuckoos 3 times at 4 o’clock), loosen the hour hand by carefully pulling it off the shaft, move the hand to the 3 o’clock position once it is loose, and push it back onto the shaft. Never adjust the time by moving the hour hand, since this will cause the exact same problem.
What happens if a wire is turned above a cuckoo?
During shipping, it may happen that this wire is turned above the cuckoo. If it is above, it may block the cuckoo and the door.
How to fix a broken clock chain?
To fix this, pull the other chains fully up and remove all weights. Take a piece of wire and secure the other chains under the clock’s case “as close as possible” to the bottom of the case (see picture). This is VERY IMPORTANT, otherwise the other chains will fall off their wheels as well during the next step. Take the clock from the wall and open it on the back. Now turn the clock upside-down and try to balance the chain back on the wheel.
How to send a clock to a service station?
To send a clock to a service station, pull the chains so the hooks are under the case . Insert a piece of string, wire or a twist wrap through all the chains “close as possible to the case bottom.”. Bundle up the chains in a piece of aluminium foil and tie up tightly with a rubber band, tape or string. This prevents the chains from coming ...
What to do if your clock is running too fast?
If your clock runs too fast, you can move the pendulum-disc down a little on the pendulum to correct this . If the clock is running too slow, you have to move the pendulum-disc up. This should also be described in your clock’s setup instructions.
