how to repair a hdmi port

^{How to Repair Broken HDMI Ports on a TV}

1. Unplug the television and set it on a flat work surface. Plasma TVs should not be subjected to angles greater than 45 degrees.
2. Remove the outer housing of the TV. Every set will be different, so take your time and be gentle. ...
3. Examine the broken HDMI port. Look for broken connections between the port and the circuit board to which it's connected.
4. Re-solder a broken connection, if you find one. If the damage to the port is just a broken solder point or two, re-solder the original plug in place.
5. De-solder the broken HDMI port if the port is physically damage beyond repair. First, note the connection points on the circuit board.
6. Solder the new HDMI port to the circuit board matching the pin connections from your notes.

Why is my HDMI port not working on my computer?

• The HDMI port or cable are physically damaged or bent
• The Drivers for your PC are not up to date, and they are preventing a picture/ sound from appearing
• You have not configured your Display to be the main screen
• The HDMI port you selected to be used is the incorrect one

How do you fix a HDMI port?

How to Fix HDMI Port Connection (TV, Windows)

• Method 1: Check your HDMI Cable Connection. ...
• Method 2: Update your Windows to the Latest Version. ...
• Method 3: Run Hardware and Device Troubleshooter. ...
• Method 4: Change Display Settings. ...
• Method 5: Remove Recently Installed Software. ...
• Method 6: Update or Reinstall your Graphics Driver. ...
• Method 7: Uninstall and Reinstall Drivers. ...

More items...

How to fix HDMI port not working on TV?

• Make sure your audio receiver or other intermediary device is HDR-compatible.
• Make sure the TV of video projector's firmware is up to date.
• If you haven't already, swap out your HDMI cable for a Hi-Speed HDMI cable with a speeds of at least 10.2 Gbps, but preferably 18 Gbps.

More items...

Why is HDMI output not working?

Why Is My HDMI Port Not Working on PC?

• There is an issue with the HDMI cable
• There is an issue with your PC ports
• The Monitor is faulty or not set up properly
• You haven’t configured the PC to display a screen
• There is an issue with your GPU / Motherboard drivers

Can an HDMI connection be repaired?

An HDMI cable provides a single solution for sending high-definition video and audio from one device to another. Those who have installed HDMI cables in their walls are ill-equipped to removing them if a connector becomes broken. You can repair the broken connector by replacing it with a new connector.

What can I do if my HDMI port is not working?

No picture from my video device when using an HDMI connectionCheck if you are using the correct INPUT. ... Disconnect and reconnect the HDMI cable. ... Check the output of the connected Video device. ... Check your amplifier. ... Unplug the Video device and TV. ... Try a different HDMI cable.

How much does it cost to repair a HDMI port?

A PS4 HDMI port costs on average $10. However, the total repair price cost can reach $150 or more, depending on the place you choose to have your console repaired. PS4 owners confirmed that Sony usually charges around $150 to repair your PS4 HDMI port.

How do I fix my HDMI port on my monitor?

Follow these steps: Unplug all TV/monitor from the HDMI ports. Unplug the power cable from the TV or monitor for about 10 minutes. Plug the power cable back in the TV or monitor. Plug one device to one HDMI port of your PC. Turn on the device. Repeat steps 4-5 for each device and HDMI port.

How do I know if my HDMI port is broken?

Look at the status of your HDMI port in the dialog box. If the status reads "This device is working properly," your HDMI port is functioning. If there is a message indicating that you need to troubleshoot your device, your HDMI port is in working condition but has a problem that is likely fixable.

How do I bypass HDMI port on TV?

2:1911:50How to Still use HDMI equipment on a TV with Broken HDMI Ports - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut by using a separate audio lead then you will get the sound as well now HDMI is a digital pictureMoreBut by using a separate audio lead then you will get the sound as well now HDMI is a digital picture and VGA is an analogue picture but you can still get the 1080p.

Can you use a PS4 without HDMI?

One of the most effective and easiest ways to use a PS4 and on a TV without HDMI is to utilize an HDMI converter. This translates the signal into something the television can understand and display.

Can GameStop fix my PS4 HDMI port?

Need your console or controller repaired? We can fix it! Just bring your eligible products into any GameStop store and we'll take care of the rest.

Is it hard to replace PS4 HDMI port?

As you can see, it is definitely possible to repair a Playstation 4 with a broken HDMI port yourself. It is a difficult process though, and you do need to have proper equipment for it. In my case, replacing the HDMI port did not fix the issue.

Why does my monitor say no signal when HDMI is plugged in?

A faulty, loose, or wrongly-placed cable is one of the most common reasons for a monitor saying no signal. Here's how to properly check your DVI, HDMI or DisplayPort cables: Unplug each cable and then replug them. Ensure each one is properly connected (fully pushed in).

How can I test my HDMI port?

How to Test an HDMI PortSpray some compressed air into the HDMI port of the display device. ... Insert one end of the HDMI cable into the display device and the other end of the HDMI cable into the source device. ... Turn on the display device and set it to the HDMI input mode.

Why does my TV say no signal when HDMI is plugged in?

In some cases, the 'No Signal' error can arise due to selecting the wrong input source. Most TVs come with two or three HDMI ports. So, if you have connected the device to HDMI 2 but have selected HDMI 1 as the input source on the TV, you will receive the 'No Signal' error.

Why does my monitor say no signal when HDMI is plugged in?

A faulty, loose, or wrongly-placed cable is one of the most common reasons for a monitor saying no signal. Here's how to properly check your DVI, HDMI or DisplayPort cables: Unplug each cable and then replug them. Ensure each one is properly connected (fully pushed in).

Why is HDMI not showing on TV?

Disconnect the HDMI cable from the HDMI Output terminal on the connected device. Reconnect the HDMI cable firmly to the same terminals as before on the TV and the connected device. Turn on the TV and the connected device, and turn them off. Then turn them on again to let the TV recognize the connected device.

Step 1: Tools You Need

This is what you need: (give or take) - Solder Iron - Solder - Desolder wire - Second Hdmi cable (optional) - Hdmi to hdmi connector (optional) - Hdmi connector - Tyraps - Sissors - Extra power cables - Multi meter - Aluminium (optional) - Crocodile clamp assist (thing) 2/3 hours... Some soldering experience...

Step 2: Wiring It All..

First we need to know which connection is going where, since both Hdmi internal connections are the same (no twisted wires or anything like ethernet patch cables) the pinout is very straight forward. 1 is going to 1 2 to 2 3 to 3 etc.... But ones the cable is cut you cannot measure which wire comes from which pin, so I used a multimeter to check which wire belongs to which pin.

Step 3: Start

Next: Peel of 2 cm from the cable and get some room between the wires.... As you can see we have a few wires (for display detection, 5 volt power, clock speed and data) in beautiful colors. And 4x 2 pairs of wires in a colorfull metal shield, these are the data wires for the picture and sound. Before you begin, slide the first part from the connector on, its a common mistake to have the connector in place and then realise that you needed to slide that one on first.

Step 4: Soldering..

First I did some solder on the contacts and on the wires. After that you can hold them together and push them in place while heating the contact on the connector.. The 25 watt soldering iron was more then enough, (maybe to much) for the job... Work from left to right (or right to left) If you dont you could end up like photo 3, with to much sodler it will touch the contact next to it and change into one big solid lump. This can be corrected by using desolder wire... After a a few wires you could be in for a suprice, some of the wires can bearly make it to the contacts. (going through all the other wires) This should not be a really big problem, just try to place the wires in the shortest way from cable to connector... And done, I was left with two ground wires, which I cut off.

Step 5: Some Extra Precaution..

After searching on the internet for a Hdmi connector I found out that there wasnt anything with a cable strain relief. Iam not sure why but do they think that 15 small wires are going to hold out? I replaced another connector two months back because it malfunctioned after working for two months... And for some reason my cable is a lot thinner then the exit hole in the back of the connector (of course there are many types of Hdmi cables out there but you would think they thought of that when they designed this connector) Not sure what to think of this... And tata...

Step 6

Then we put the hole assembly into the wall, since the walls are hollow we have enough room to put it all in there without bending anything. After closing it all up there is nothing to be seen, but if this cable breaks we can connect a new Hdmi cable within 10 minutes. And there you go, running a signal through a 5 meter long cable with a self-soldered connector, then through a Hdmi to Hdmi connector and then another 3 meters to the Imac with converter. I tested it with a 1080P trailer and there was no scrambeld or strange picture to be seen, proves that Hdmi is a good and solid protocol. Way to go Hdmi... Bytheway a nice tip that I've got from from c0lin was to get one of these: http://www.infinitecables.com/pop/wpk-hd1-d.htm And I have seen comments about using glue as a strain relief, I have something to say about it: DONT DO IT! It didnt work with any glue I used (including hot glue) and I ended up doing al this a second time. The cable itself and the connectors are so smooth that any glue you would use has trouble sticking on to it. That is why I left it out and used the aluminium and Tyraps approach. For more tips (untested) look at the comments below (first page).

How to fix HDMI not working?

If HDMI not working issue happens to your computer, you should check the HDMI cable connection at first. You just need to disconnect all the HDMI cables and unplug the power cable. After about 10 minutes, plug back the power cable and connect your computer again to other device with the HDMI cable.

What is HDMI port?

The HDMI port is an important hardware component that allow the device to connect to external peripherals lick monitors and video projectors through one cable. Unfortunately, this popular high-quality connection method doesn’t work properly in some cases.

What is HDMI in video?

Quick Navigation : HDMI stands for High-Definition Multimedia Interface. It is a proprietary audio/video interface and it works to transmit uncompressed video data and compressed or uncompressed digital audio data from an HDMI-compliant source device to a compatible device, according to Wikipedia. HDMI is the standard connection device ...

How to troubleshoot Windows 10?

To do that, you just need to follow the steps below: Step 1: Press Windows + I to open Settings app. Step 2: Go to Update & Security category. Step 3: Choose Troubleshoot tab in the left pane.

How long does it take for HDMI to work?

After about 10 minutes, plug back the power cable and connect your computer again to other device with the HDMI cable. After that, turn on your computer and check if you can receive audio/video now. If HDMI not working issue still exist after excluding the connection issue, you can move on to the next solution.

How to update my graphics driver?

Step 1: Right-click the Start button and choose Device Manager from the list to open it. Step 2: Double-click Display adapters category to expand it. Step 3: Right-click your graphics driver and select Update driver.

Why Is My HDMI Port Not Working on PC?

The common symptoms of a bad HDMI port are a lack of sound, image distortions or just no output at all. If the issue is hardware-related, the fix could be as simple as replacing the damaged cable. If there is software incompatibility, then in most cases updating your HDMI and GPU drivers will do the trick.

To Check if Your HDMI Port Is Faulty on a Laptop

Laptops display HDMI ports under the device manager. If you see yours correctly listed there, there is no issue with your laptop recognizing the HDMI port. To check if this is the case, please perform these steps:

How to Fix an HDMI Port on Windows

Before you attempt any other troubleshooting steps, there is no point if the port itself is physically damaged or the HDMI cable is faulty. This is the correct way to check your HDMI port for physical damage:

HDMI Port Not Working on PS4 Fix

A similar fix is available for your PS4 the same way as the TV. Ensure that no other HDMI cables are plugged into your main monitor/TV besides the HDMI cable from the PS4.

HDMI Port Not Working on a TV Fix

If you have done all previous troubleshooting steps and still get no output from the HDMI port, you have to troubleshoot the TV screen itself.

HDMI Port Has No Audio Output

An outdated or missing driver is a common fix to having no input or output from your Monitor’s in-built speakers/ microphone. If your HDMI port shows a picture but no sound, try these steps: