Cut the damaged portion of the hose using garden shears. Slip the clamp over one of the ends and insert the connector by using a lubricant. Tighten the clamp with a screwdriver.
Full Answer
What is a Hercules garden hose?
The Hercules Metal Garden Hose is a metal hose made of heavy-duty stainless steel, so it won't break under pressure. Its lightweight and portable design is also flexible, as well as kink- and tangle-resistant, and won't fall victim to sharp objects like a regular rubber hose. Attaches to all standard spigots and nozzles.
How do I prepare to repair a damaged expandable hose?
The first step in preparing to repair a damaged expandable hose is to gather the tools and supplies that will be needed, as this will prevent frustration later when working on the hose.
How do you fix a kink in a hose?
Hot water expands in the hose, and UV rays can weaken the material. Coil your hose after each use, either by hand or with a hose reel. If the hose kinks, reroll it immediately to prevent splitting. Drain the hose and remove any attachments, and store it out of the elements during winter.
What tools do you need to repair a broken hose?
In addition to having some device such as scissors to cut out the broken or leaking section of hose, you will also need vice grips, duct tape, a ½” coupling, hose clamps, and soap. Once all of the tools are assembled, then you can start with the actual repair work.
Can expandable hoses be repaired?
A damaged expandable garden hose is repairable. While a patchwork tactic will work in the short term, it will likely re-tear once high pressure is forced through the tubing. A permanent solution is to break the hose and use connectors to join them back together.
Can a steel hose be repaired?
If your steel braided hose is in an area such as for a washer and dryer water supply, you can fix small leaks the size of a pinhole with nothing more than duct tape and/or common household items such as silicone caulking. Commercial hoses or those for hydraulic pressure, for example, require a coupler to fix properly.
How do you fix a broken flex hose?
1:176:50Expandable Hose (e.g. Pocket Hose) Repair Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo in that video i just showed you i put one clamp on but i went back and did a second one while itMoreSo in that video i just showed you i put one clamp on but i went back and did a second one while it was stretched. So i can make a shorter hose.
How do you repair a rubber hose?
2:143:25How to REPAIR GARDEN HOSE in SECONDS - 3 EASY WAYS!YouTubeStart of suggested clipEnd of suggested clipEnd insert the barbed fitting. And then tighten the clamp down and now you've got a brand newMoreEnd insert the barbed fitting. And then tighten the clamp down and now you've got a brand new threaded end that you can use in your hose. And remember that every hose always has to have one female.
How do you fix a hole in a hose?
0:512:48How To Repair Fix Leak Hole Water Hose Easy Simple - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first thing that you want to do is locate the hole. The second thing you want to do is turn offMoreThe first thing that you want to do is locate the hole. The second thing you want to do is turn off the water the third. Thing you want to do is remove all the water from inside the water hose.
How do you stop a hose from leaking?
It's fairly easy to fix. First, clean the area around the leak with some soap and water to remove any dirt and grime and allow it to dry. Apply bicycle tube glue or rubber cement over the leak. After the glue or cement dries, wrap the area with plumber's tape and your hose should be good to use for a few more seasons.
Why do expandable hoses break?
An expandable garden hose needs sufficient water pressure to work correctly. If you have poor water pressure, the garden hose won't expand correctly. Because of the materials that hoses are made from, they may be susceptible to tears and punctures.
How do I fix a leaky braided hose?
If you find thread sealant, also known as plumber's tape, on your braided line's threads, remove the nuts and clean the sealant from both the braided line and the valve or faucet inlet. In addition, check to make sure that the braided line connectors are the correct size for the fixture or appliance and water supply.
Can a pocket hose be repaired?
If your expandable / pocket hose is leaking in the middle it's likely the inner flexible tube has a hole in it. But unlike a regular rubber hose, pocket hose cannot be patched up with a waterproof tape. You will need to do a little bit to work to get it fixed.
Can you fix a hose with duct tape?
Duct Tape for Hose Leak Duct tape might seem capable of fixing anything, and it's tempting to try to use it to fix a leaky garden hose. Duct tape isn't designed for watertight repairs, however, and even if it manages to stop the leak in the short term, the repair is unlikely to last.
How do you fix a pinhole in a rubber hose?
Coat the Pinhole with Rubber Cement You could also use rubber cement for tears and punctures. Start by wiping the punctured section of the garden hose dry. What is this? Once you are done drying, apply rubber cement around the hole.
Can flex tape fix a garden hose?
Flex Tape may not work with all hoses, and it is not recommended for applications with high water pressure (such as garden hoses and hoses in a car engine). If you have any questions, please do not hesitate to contact our customer service team at (833) 411-3539.
How do you fix a braided line?
0:000:56How to fix wind knots on your braided line the easy way - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd what this does is to lubricate the knot to the point where when you pull on it it does notMoreAnd what this does is to lubricate the knot to the point where when you pull on it it does not damage the knot and lock it down even tighter. So just pull it firmly.
How do you fix braided fuel lines?
1:454:25Steel Braided Fuel Line Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow lined up next to one another my spare is longer so i'm gonna mark this all right now let me showMoreNow lined up next to one another my spare is longer so i'm gonna mark this all right now let me show you how i do this i'm gonna take some electrical tape. And go right in the center of that dot.
How to find a hole in a hose?
Identify the Hole. The easiest way to find a hole in an expandable hose is by attaching it to the spigot and turning on the water. This forces the hose to expand and will allow water to leak out of the hose where there is a hole. Some holes are large enough to be very obvious, while others are small enough so that they are harder to see.
How to put a coupling in a hose?
Use a small amount of soap on the ends of the couple to gently push each end into the cut end of the hose. It should be a snug fit, as you do not want the coupler to pop back out, but shouldn’t be so difficult that you struggle to put it in. If the coupling is too large then it will not easily fit into the cut ends of the hose.
Why do you need to attach a hose clamp?
These clamps need to be tightened enough to prevent the hose from slipping out. Making them too tight, however, can result in accidentally cutting off the flow of water.
Why do you turn the water back on after a hose is repaired?
Now that the hose has been repaired, it is necessary to turn the water back on to make sure that there aren’t any other holes and that the coupling is in place. Rather than turning the hose on all of the way, slowly turning it up is the best way to check for more holes or for a loose coupler without accidentally bursting the hose.
What to use to mark a hose?
If the hose is a lighter color and not black, then you may be able to use a marker or pen to mark the location of the hose instead of using tape.
When to use soap on a hose?
When the ends of the hose have both been cut at the right angle, then you will be able to easily insert the coupler into each end. This is where having the soap comes in handy, as it can be used to lubricate the coupler, making this process easier.
Do you cut the ends of a hose at an angle?
Once the section of the hose that has the hole has been cut out, then the ends of the hose need to be cut at an angle. Doing so makes it much easier to put the coupling into the hose without a lot of effort.
How long is a hose after water is turned off?
Once the water is turned off, the hose returns to the 17-foot length. This feature alone makes this hose a great choice for an older person, a person with an injury or disability, or any person who dislikes rewinding the hose after use.
What temperature does Flexzilla 50 foot hose work at?
The Legacy Flexzilla 50-foot hose has an all-weather flexibility, withstanding temperatures ranging from -40 to 150 degrees Fahrenheit. This first feature makes the hose a great choice for those living in areas with extreme temperatures.
Why is Flexzilla easy to wind up?
The Flexzilla is easy to wind up because it has a no-memory, lay-flat design. It is made of flexible hybrid polymer making it abrasion resistant. This hybrid polymer probably doesn’t hold up as well as the metal casing of the Hercules Hose, but barring extreme use, the Flexzilla is durable.
How to repair a hose that is leaking?
Locate the damaged section of the hose. Remove the hose from any attached devices if necessary, and set it in the sun for a few hours to let the rubber portions warm up and reach the highest level of flexibility. Soak the damaged portion in hot water for additional flexibility if desired.
How to clean a hose that has been damaged?
Put on your work gloves and grasp the hose firmly with a pair of pliers. Using your free hand, place the blade of the hacksaw against the hose and begin cutting. Cut through the hose on either side of the damage section, removing it completely from the hose. Use a utility knife to clean the edges as best as you can.
What is the difference between steel braided hose and rubber hose?
They are most commonly used in applications where additional strength is required for pressure, such as with hydraulic systems. While they are harder to cut than regular rubber hoses, the principles of repairing a steel braided hose are exactly the same, utilizing couplers from a repair kit to patch undamaged sections together.
How to use a hose coupler?
Rub some dish soap over the end of the two pieces of hose that will slide into the coupler, as this will grease the ends and lubricate them for ease of use. Slide both ends of the hose into the coupler device and ensure they are pushed in as far as they can go. Hold them in place while you tighten the screws on the coupler, locking the two ends in place and running them through the coupler.
Can you fix a pinhole in a hose?
All materials and tools can be purchased or rented from your local home improvement store. If your steel braided hose is in an area such as for a washer and dryer water supply, you can fix small leaks the size of a pinhole with nothing more than duct tape and/or common household items such as silicone caulking. Commercial hoses or those for hydraulic pressure, for example, require a coupler to fix properly.
How to get a Hercules smart card?
You can request a Smart Card online or by contacting Hercules and we’ll mail you a new Smart Card. Or, you can contact your building’s management company. They should have Smart Cards for new residents.
Does Hercules accept Visa?
The Hercules system accepts Visa®, MasterCard® and American Express® gift cards. However, Hercules is not responsible for any transaction fees.
What is a Hercules hose?
The Hercules Metal Garden Hose is a metal hose made of heavy-duty stainless steel, so it won't break under pressure. Its lightweight and portable design is also flexible, as well as kink- and tangle-resistant, and won't fall victim to sharp objects like a regular rubber hose. Attaches to all standard spigots and nozzles.
Is Hercules hose UV proof?
The Hercules Garden Hose is UV-proof to stay cool to the touch, and it's corrosion-resistant, so you can leave it out in the rain, too! Includes hose reel for easy storage. You may also like. Customers who bought this also bought.
Small Leaks
Use common electrical tape in a pinch or specially designed hose repair tape to mend a small leak. Clean and dry the hose before applying. Overlap the tape as you wrap it around the hose. If you wrap it too tightly, the hose will crease and the tape won't seal.
Leaking Spigot
A washer replacement is the simplest of all repairs and is often all that's needed. Washers dry or deteriorate with age. Simply remove the old one, and pop in a new washer. If it still leaks, replace the coupling.
Large Leaks
Replacing a hose end or repairing a center section is a little more involved but still a simple job. The repair requires cutting the damaged section out and replacing with a mender. When cutting away damaged parts, make straight cuts with a sharp blade.
Protecting Your Garden Hose
A good garden hose is a smart investment. If you take care of your hose, it will serve you well through many seasons of lawn and garden projects. Follow the steps below to prolong the life of your hose:
