Step-by-Step Guide to Patch a Hole in Your Bounce House
- Clean the Affected Area. You can’t patch the bounce house leak correctly if dirt, sand, grease, or any other debris sits on the area.
- Cut Out the Patch in an Oval or Circular Shape. Never cut with sharp edges during this process. ...
- Don’t Let the Patch Curl Up. ...
- Apply Your Glue. ...
- Apply the Patch Firmly to the Vinyl. ...
Full Answer
How do you fix a broken bounce house patch?
Check to make sure the edges of the patch are completely glued to the bounce house. If there are any pieces of the patch peeling away, put more glue and apply pressure until the patch is completely adhered to the bounce house. Let the glue dry for a couple hours before using the bounce house.
How to repair a bounce house netting?
Sewing a tear with the awl kit and then applying a patch is the most permanent professional bounce house patch repair that you can do. Fixing the netting on a bounce house in a professional way takes some time and involves some weaving skills.
How do you know if there is a hole in bounce house?
There’s a few ways you can easily find if there’s hole in a bounce house, but for smaller leaks, it can be more difficult to find. The simplest way is to walk around the bounce house while inflated and the blower running and feel for any air escaping the bounce house where it shouldn’t be.
Will duct tape fix a leaking bounce house?
Duct tape may work decently on smaller bounce houses, but at best, it’s a very temporary fix. Another quick fix options is to get some Vinyl Repair Tape (link to Amazon) and tape over the leak with that. For us, this has had more success than a duct tape fix, but still is not a long term solution.
How do you repair a hole in a bounce house?
Steps To Apply A Bounce House Patch:Clean the area to be patched.Cut the patch into the shape of a circle.Flatten the cut areas.Apply vinyl glue around the leak.Apply vinyl glue to the patch.Press the patch on and apply pressure.Check that edges are sealed.
How do you fix a hole in a seam of inflatable bounce house?
0:531:52How to patch a leaking seam with repair tape - Bounce House TutorialYouTubeStart of suggested clipEnd of suggested clipYou want to stretch the patch as tightly as you can this repair tape is very elastic. And so it'sMoreYou want to stretch the patch as tightly as you can this repair tape is very elastic. And so it's actually made to do that okay now the tape is completely applied.
What kind of glue do you use to patch a bounce house?
vinyl cementSimply apply the vinyl cement to the cleaned area on the unit and also on the secondary vinyl (patch or what you are gluing to the inflatable). The vinyl cement needs to dry for a couple of minutes to become tacky then apply together with pressure for a few minutes.
How do you fix a puncture on a bouncy castle?
0:367:56How To Repair a Bounce House | Repair a Bouncy Castle - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd fastest way to repair an inflatable when you're in the field is going to be a product called TPUMoreAnd fastest way to repair an inflatable when you're in the field is going to be a product called TPU take a TPU tape is a very very flexible tape okay that can be used to repair.
Can You Use Flex Seal on a bounce house?
0:021:532018.10.14 - Using flex-seal tape to fix bouncy houses - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe just apply that right in there and it sticks all the time keeps all that air from coming out andMoreWe just apply that right in there and it sticks all the time keeps all that air from coming out and it's got a nice clean.
How do you fix a hole in inflatable seams?
2:013:55Invisible Seam Repair on an Inflatable Toy - YouTubeYouTubeStart of suggested clipEnd of suggested clipAround i push the vinyl of the toy down against the glue covered patch this squeezes out some of theMoreAround i push the vinyl of the toy down against the glue covered patch this squeezes out some of the vinyl cement. So i quickly reach for the paper towel to dab away the excess.
Can you use epoxy on inflatables?
3:304:16How To: Inflatable Repair Adhesives Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll want to use G flex epoxy G flex is a very strong and flexible epoxy that will stick to justMoreYou'll want to use G flex epoxy G flex is a very strong and flexible epoxy that will stick to just about anything as long as the surfaces are prepared properly.
How do you repair vinyl inflatables?
0:255:08Repairing Inflatable Pin Holes, Punctures, and Tears - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first step and one of the most important is to deflate the toy completely before attempting anyMoreThe first step and one of the most important is to deflate the toy completely before attempting any repairs. Most solvent glues for repairing vinyl temporarily make the vinyl very soft.
What glue is good for vinyl?
Polyurethane glue is ideal for gluing thinner flexible vinyl together as well as gluing vinyl to other surfaces like wood or plastic.
Can you use super glue on inflatables?
0:061:45How to make a Quick Inflatable Boat Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipQuick easy fix is just common old superglue he's a gorilla glue elephant glue all those things youMoreQuick easy fix is just common old superglue he's a gorilla glue elephant glue all those things you can find from hardware shops and supermarkets.
Can you sew a bounce house?
0:101:48Repair Damaged Stitching using a Sewing Awl Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart off roughly a quarter inch away from the damaged. Area. With your sewing awl kit push theMoreStart off roughly a quarter inch away from the damaged. Area. With your sewing awl kit push the needle through the vinyl and pull the end of the thread all the way out.
How do you find a hole in a bounce house?
0:021:16Life Hack: Easily find the leak in an inflatable object - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you don't actually know where just spray the area rub. It in. There it is right. There. Do itMoreAnd you don't actually know where just spray the area rub. It in. There it is right. There. Do it again there. That's where the hole.
How do you sew inflatables?
0:101:48Repair Damaged Stitching using a Sewing Awl Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart off roughly a quarter inch away from the damaged. Area. With your sewing awl kit push theMoreStart off roughly a quarter inch away from the damaged. Area. With your sewing awl kit push the needle through the vinyl and pull the end of the thread all the way out.
How do you repair vinyl inflatables?
0:255:08Repairing Inflatable Pin Holes, Punctures, and Tears - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first step and one of the most important is to deflate the toy completely before attempting anyMoreThe first step and one of the most important is to deflate the toy completely before attempting any repairs. Most solvent glues for repairing vinyl temporarily make the vinyl very soft.
How do you fix a hole in an inflatable water slide?
Cut a patch that is at least ½ inch bigger than the tear, spread small amounts of glue around the square, and place the patch onto the glue to cover the tear. Then let the glue dry on the patch for at least 24 hours.
How do you find holes in a bounce house?
0:021:16Life Hack: Easily find the leak in an inflatable object - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf an inflatable object is losing air and if it is losing air and you don't know from where how toMoreIf an inflatable object is losing air and if it is losing air and you don't know from where how to find the spot where it's losing air for this you will need a damp rag.
How do I prevent rips and tears in my Bounce House?
Choose an appropriate site that is free of sticks and rocks - Store your bounce house properly - Set rules for children, including a no shoe policy.
How much does it cost to repair a Bounce House?
Vinyl Repair Kits, Sewing Awls, and other tools you may need will ultimately determine the total cost. For a rough estimate, let’s call it $10-30....
How do I repair any netting on the Bounce House?
You could sew the netting back together with the right equipment (needle, string, etc).
How to puncture a bounce house?
Some people might even go so far as listening very carefully near where they think their kid has found something too big like rocks which could potentially puncture bounce house.
Why do bounce houses fade?
The brilliant colors of a bounce house can fade after being exposed to the elements for too long. After they’ve lost their shine, it’s possible that your fun (and hopefully bouncy) inflatable is not going to be as much fun anymore! Fortunately, there are steps you can take in order to fix them up and get back on track with all things bouncing again.
How to fix a rip in a patch?
Apply adhesive to your patch and place it over the hole, smoothing out any air pockets with a roller or squeegee. Then once the glue has been applied generously over the entire area of rip (s), pressing together firmly.
How to store inflatables in summer?
During the summer months, you will want to store your inflatable in a cool and dry location . Be sure not to expose it directly on an asphalt surface because that could cause damage from extreme heat. If possible, use something like plywood or concrete blocks as spacers between the ground and where you plan to put it down for storage during this time of year when temperatures are higher outside than inside most buildings.
How to fix a small tear in a drywall wall?
For larger holes, cover them with some tarp material that is cut into strips of appropriate size (approximately 2-3 inches wide). Secure on all sides by tying off each corner at the point where two pieces meet with thick string —make sure this isn’t too tight because air needs to flow through!
Can an inflatable balloon leak?
Air leaks that happen when an inflatable is being inflated may not seem like much. But if they’re left untreated then this could lead to problems with overinflation later on which will cause damage or even deflate the entire thing. It’s important for people who own these types of items to know what potential pitfalls their equipment has so that they can take measures accordingly – there might not always be someone around willing to offer up advice about how best to resolve such emergencies!
Can bounce houses leak?
Bounce houses are always a lot of fun for kids and adults alike, but there may be times when you notice that they have started to leak. Leaks can cause the bounce house to lose its air pressure over time and eventually deflate completely. Fortunately, it is relatively easy to find leaks in these inflatable toys if you know what signs look out for.
How to tell if a bounce house has a hole?
The simplest way is to walk around the bounce house while inflated and the blower running and feel for any air escaping the bounce house where it shouldn’t be .
How to fix a leaky bounce house?
Another quick fix options is to get some Vinyl Repair Tape (link to Amazon) and tape over the leak with that. For us, this has had more success than a duct tape fix, but still is not a long term solution. This could work great for smaller bounce houses. The problem is, after enough use, the tape starts to pull up and air starts leaking out again.
What to do if your bounce house is tearing?
Sewing a tear with the awl kit and then applying a patch is the most permanent professional bounce house patch repair that you can do.
How to make soapy water for bounce houses?
1 Tbsp glycerin. 1 Gallon of water. Combine, shake, and use to coat the bounce house a couple square feet at a time. I’ve done this without the glycerin, just using soap and water, and was able to locate a small leak.
Why is my bounce house discolored?
If you’re discoloration is from mold, mildew, or something else, your bounce house could benefit from a good cleaning. Check out my How To Clean A Bounce House article for a step by step walk through of the proper cleaning process.
How to find a leak in a sandbox?
Ways To Find A Leak: 1 Feel for air escaping 2 Submerge in water (only viable for small models) 3 Coat with soapy water 4 Listen for air escaping
What can prevent a patch from sticking?
Dirt and debris can prevent the patch from sticking properly. Make sure the area you will be applying the patch is free from water, grease, dirt, and any other debris.
How to repair a rip in a car?
Using a repair kit with the necessary materials, poke holes around the rip and sew the two sides together and then glue a vinyl patch on either side of the sewn tear.
How to repair a tear in a vinyl window?
This repair is done by gluing an extra piece of vinyl on the inside of the tear as described above and then puncturing precise holes through both pieces of vinyl. Make sure the area is completely cleaned and dry before starting the process. Using a curved needle and special string you essentially sew the tear together. When the hole is sewn, another patch of vinyl is glued on top. Similar to the repair described above, try to get every air pocket out so that the vinyl patch can seal securely. Because you will now have the sewn pieces under the repair, take your time to firmly press out any bubbles carefully with your fingers and press firmly around the bumps of the sewn tear.
How to fix a tear in vinyl patch?
Clean the area with a fast-drying alcohol swab and make sure it is dry before putting on the glue. Brush on the vinyl cement glue onto both the tear and the vinyl patch. Press the two together keeping it as flat as possible. Use a towel so that the glue does not get on your hands. Try to remove any air pockets.
Can duck tape be used on bounce houses?
It is not recommended to use Gorilla Tape or Duck Tape to repair a bounce house. Even if it is waterproof, these types of tape do not have much flexibility or elasticity to them so they will rub off and not last. They will also leave a sticky residue behind.
Do bounce houses have air pockets?
You bounce house will most likely always have air seeping through the seams and built-in pockets at the top for air to flow out . This is actually an amazing feature of your bounce house as the constant stream of air flow is what keeps it so strongly inflated while so many little bodies jump all over it.
Can mice get into a bounce house?
Make sure you have a thick bag protecting your bounce house and store it in a place where mice cannot get to it. -Don’t allow shoes or sharp objects on the bounce house. Hopefully, this is a common rule for your bounce house fun for the safety of the children, but it can also protect the bounce house as well.
Do I need to Patch Everywhere that I feel Air Coming Out?
This is not the case. You bounce house will most likely always have air seeping through the seams and built-in pockets at the top for air to flow out. This is actually an amazing feature of your bounce house as the constant stream of air flow is what keeps it so strongly inflated while so many little bodies jump all over it. The continuous air flow is what makes it different from a balloon that could pop at any moment and essentially adds to the incredible durability of the inflatable.
