HOW TO REPAIR A HOLE IN THE BACK POCKET OF YOUR JEANS
- STEP ONE. Trim around the edge of the hole. Cut the fabric into a patch. It’s okay if it skews large—you can always trim...
- STEP THREE. Place the patch inside the back pocket. Pin the patch into place, making sure the pins only catch the outer...
- STEP FIVE. Thread both ends of the thread through a needle, leaving a...
- Prepare the Area. If there are any loose threads or frayed edges around the hole, you want to clip those off.
- Cut the Patch. Use one-sided fusible interfacing or a scrap of lightweight fabric as a patch. ...
- Attach the Patch. ...
- Sew the Patch. ...
- Finish Up.
How to fix torn jeans pockets?
The things you need to gather area:
- Scrap material or fusible interfacing.
- Needles.
- Thread.
- Marking pen. [Must carry removable or invisible ink]
- Embroidery snipes of scissors.
- A board and an iron.
What can you do with old jeans pockets?
What you need:
- your old jeans
- some twine
- a sewing needle large enough for your twine
- some stuffing (optional).
How to fix holes where the jeans meet the pockets?
Sew New Pockets in Jeans
- Assess Damage. First step is to turn your jeans inside out and assess the damage. ...
- Mark Existing Pocket + Remove. Lie the pocket flat and mark on where you want to cut. ...
- Transfer Dimensions + Cut. Fold your donor fabric in half (pattern/texture side in) and place flat on a table. ...
- Sew New Pocket to Jeans. ...
- Clean Up + Wear! ...
How to Mend Your Jeans?
How to rip jeans :
- 'Put your jeans on and mark where you want the rips. ...
- 'Grab sharp but small scissors - precision is key with the scissors. ...
- 'Take your scissors and use the edge to scrape the length of the jeans horizontally in the areas that you want the rips to form. ...
- Cut a little, then try them on. ...
Can you repair jeans pockets?
Use the piece of pocket that was cut off to determine where to sew the bottom of the pocket. Place the torn pocket piece over the repair fabric. Place pins in the repair fabric - but not through the torn pocket - around the curved edge of the pocket piece. Remove the torn pocket.
How do you sew a ripped back pocket?
0:187:38How to fix torn jeans pockets - YouTubeYouTubeStart of suggested clipEnd of suggested clipI am also going to need some denim thread to top stitch over the pocket I am using some denim scrapsMoreI am also going to need some denim thread to top stitch over the pocket I am using some denim scraps to patch under the torn fabric ideally.
How do you sew a pocket back in jeans?
2:466:07How to Sew Jeans Back Pockets: Easy Step-by-Step Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart stitching from the right outer edge stitch along the edge until you reach the lower edge ofMoreStart stitching from the right outer edge stitch along the edge until you reach the lower edge of the pocket. And then with a needle left in the fabric lift the presser foot and pivot.
How do you patch a pocket hole?
0:322:36Quick fixes: How to repair ripped pockets - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what you're going to want to do is find the area that's ripped which is here and you're going toMoreSo what you're going to want to do is find the area that's ripped which is here and you're going to want to fold that over once. And if you can fold it over twice.
Why do my jeans tear at the back pocket?
The back pockets of denim jeans are prone to wearing out at the top corners with use. If that's where you carry your phone or wallet, you'll almost certainly develop holes at those stress points long before the rest of the jeans are worn out. Luckily, repairing a back pocket is a pretty simple fix.
Do iron on Jean patches work?
0:121:11How to Fix Ripped Jeans with Iron-On Patches - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you can wash your jeans as needed ripped your belt loop while putting on your jeans. Simply cutMoreSo you can wash your jeans as needed ripped your belt loop while putting on your jeans. Simply cut an iron-on patch down to about double the size of the hole iron it on and using a needle and thread.
How do you fix a pocket in pants?
0:147:21How to Repair Holes in Pant Pocket - DIY Add New half Pocket - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith your two pieces of fabric. Together place the cutout pocket piece onto it so that the outerMoreWith your two pieces of fabric. Together place the cutout pocket piece onto it so that the outer edge is parallel to the outer edge of the fabric. And then pin it down in place.
How can I fix a hole in my pocket without sewing?
Here we will be talking about the three tricks that can assure you to have the hole fixed in no time.Method 1: Self-sticking garment tape.Method 2: Heat-activated hemming tape.Method 3: Fabric patch.
How can I fix a hole in my jeans without sewing?
1:395:09How to fix torn jeans (no sewing) - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst I'm to turn the jeans inside out I like to put plastic bags. Inside the legs to prevent theMoreFirst I'm to turn the jeans inside out I like to put plastic bags. Inside the legs to prevent the glue to go through and stick to the back side of the leg.
How do you sew a patch by hole by hand?
0:201:55Sew a patch over holes - Mend tears in clothes - Easy DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhich means you take a step back and come out of the hole you already came out or close to that holeMoreWhich means you take a step back and come out of the hole you already came out or close to that hole. And then pull your thread tight.
How to keep jeans from fraying?
To retain the aesthetic of your jeans, cut away any parts which are frayed and looking rough. Next, although it’s tempting to cut the whole pocket off, flatten the pocket out and make a line to cut out slightly away from where the pocket meets the jeans.
How to make a pattern on jeans?
Get some bleach, paintbrushes, a bowl, some rubber gloves and a printed pattern of your choice. Using the gloves, grab your brush and paint the pattern onto the jeans with bleach, using the printed pattern for reference. After approximately 20 minutes, go over it again filling in the gaps.
What to put on jeans to make them look good?
Add studs, beads or pearls. Add some personality to your jeans and make them yours with some stylish studs, beads or pearls. All that’s required for this look is a hot glue gun, some pliers, scissors, the accessory of your choice and some fabric.
How much thread do you need to sew a tear?
Tears. For smaller tears, again you’ll need 20 inches plus of thread to do the job. Tie a knot in the same place as for holes, as far away from the needle as possible. Pinching the edges of the torn areas together, start to sew, ensuring that any frayed or damaged parts are on the inside.
Where is the rip on jeans?
There’s a rip on the inner edge. If the rip is located on the inner edge of the pocket , that is to say between the area closest to you when you are wearing the jeans, then again you’ll need to replace the whole pocket. The material can be quite delicate, especially after extended use, so any attempt to fix this area up will likely result in ...
Can you hand stitch a pocket?
While a sewing machine certainly helps make the job easier, you can also pull this off by hand stitching with a needle and thread.
Can you fix a rip in a pocket?
There’s a rip on the outer edge. If you see that the rip is only confined to the outer edge of your pocket, that’s generally good news for you. You can easily fix this kind of tear with some tidy sewing, closing up the hole with a larger seam of a similar color than the pocket.
How to secure patch to pocket?
Securing the patch to the pocket. If you’re using an iron-on product, iron it on to cover the hole from the inside according to the manufacturer’s instructions. For sewn-in patches, baste in patch to keep it from shifting. Patches ironed in place on the inside of the jeans.
How to reinforce iron on patch?
Regardless of whether you chose an iron-on or sew-in patch, you need to reinforce the patch by sewing a strong row of stitches around the edges. For a less visible patch, I like to sew a square of stitching around the hole, making sure to include the corner of the pocket in the square. I sew over the square a few times to reinforce.
Do jeans wear out at the top?
The back pockets of denim jeans are prone to wearing out at the top corners with use. If that’s where you carry your phone or wallet, you’ll almost certainly develop holes at those stress points long before the rest of the jeans are worn out. Luckily, repairing a back pocket is a pretty simple fix.
Ripped Back Pocket Seam Repair
Install the proper gauge needle into your sewing machine. Make sure the needle has a stiff shank and sharp point. Use a size 10/70 up to a size 18/110 needle. These needles are made to sew through stiff, heavy fabric in several layers. It is commonly referred to as a denim needle.
Repairing a Rip Through the Center of the Pocket
Decide which repair you want: removal of the pocket and repair, or repair without removing the pocket but losing the use of the pocket. If you just fix the rip, it’s easier, but the pocket will be sewn closed. To remove the pocket proceed to the next step.
How to fix holes in jeans?
Most of the fixing of holes in jeans involves sewing a patch that will cover the hole. A patch is an extra piece of fabric attached on another fabric – this piece of fabric should be large enough to cover the hole – it can be matching the base fabric to blend in or a contrasting one which will stand out.
How to fix a straight cut tear in jeans?
If you have a straight cut tear in your jeans, hand sewing is the easiest method of fixing the tear. Use interfacing or fabric mending tape under the tear. Keep them under the tear and fix it there with heat. Use the overcast stitch over the torn edges carefully, with a thread the same color as the jeans.
How to stitch jeans with a sewing machine?
Thread your sewing machine with a thread that closely resembles the color of the jean. Keep the jeans under your sewing machine – use your free arm to conveniently move the jeans as you stitch.
How to use reverse lever on denim?
You can use the reverse lever to go back and forth or just pull the fabric to move the stitches. I recommend the reverse lever, after the fate of my needles. Make those stitches in the direction the original fabric is woven. Remember denim has a twill type of fabric weave – made diagonally.
What is decorative patch?
A decorative clothing patch is usually painted or embroidered with bright colored designs. If the hole is in a place where you can affix such patches (some places may not be suitable for decorative patches, you must know) do so. They are really fun and make a statement. Here are posts on making clothing patches and attaching patches to fabric.
Is it better to repair jeans with no holes?
Denim is forgiving, which makes the mending of jeans hole a repair work which is easier than any I know. But having no hole is better than getting the hole and struggling to repair it. There are ways that you can prevent these holes from happening in the first place.
Can you patch jeans with denim?
But if you are patching with denim fabric itself you can leave the edges as they are as denim would not fray as much. You can however cut the patch fabric with rounded corners to make them stronger. Use thread the same color as the jeans for optimal and invisible looks.
Introduction
Use this guide to help you repair your ripped back pocket in your jeans.
Step 7
Loop the needle through the thread to tie a knot to end and secure the sewing.
Choosing Your Patch Material
Securing The Patch to The Pocket
- If you’re using an iron-on product, iron it on to cover the hole from the inside according to the manufacturer’s instructions. For sewn-in patches, baste in patch to keep it from shifting.
Reinforce The Patch
- Regardless of whether you chose an iron-on or sew-in patch, you need to reinforce the patch by sewing a strong row of stitches around the edges. For a less visible patch, I like to sew a square of stitching around the hole, making sure to include the corner of the pocket in the square. I sew over the square a few times to reinforce. Choosing a thread that matches the denim or is slightly dark…
Preventing The Problem
- Whenever I patch one pocket rip, I take the time to reinforce all the corners with iron-on patches and a square of reinforced stitching. It doesn’t take much extra time, and keeps the rest of the corners from needing repair in the near future. You could even do this to new jeans as a preventative measure if you have this problem frequently.
Final Result
- Here’s the finished patches. I’m pretty satisfied with the results. The work isn’t that noticeable and matches the variations in blue on the rest of the jeans. It’s definitely better than holes that will continue to rip in a revealing location. Like this post? To make sure you never miss a future post, please sign up for my newsletter.
Shop Sales!
- For the entire month of September, all of my handmade soaps are 20% off. Shop handmade soaps here. My machine embroidery files are also on sale all month for just $1 each! Be sure to check out my latest Halloween designs. Shop embroidery designs here.