Repairing Guides

how to repair a hole in the wall

by Irma Torp Published 1 year ago Updated 1 year ago

How to Fix a Hole in the Wall

  1. Gather Your Materials. Gather your materials.
  2. Prepare the Hole. Remove any loose drywall that may be behind the hole or attached to the edges of the hole. ...
  3. Attach the Wall Hole Patch. Remove the backing paper from the sticky side of the wall patch. ...
  4. Apply Drywall Patching Compound to Wall Patch and Wall. ...
  5. Sand the Patching Compound. Sand the patching compound until smooth. Make sure the edges are flush with the rest of the wall. ...
  6. Spray the Sanded Compound With Wall Texture Spray. Each wall texture spray is different so follow the instructions on the bottle but generally they need to be shaken ...
  7. Paint the Area. The final but potentially messiest step is painting over the texture to get the color to match the rest of the wall.

Part of a video titled How To Fix a Hole in the Wall - YouTube
These plaster patches are super easy to attach. You simply peel off the back and stick it onto theMoreThese plaster patches are super easy to attach. You simply peel off the back and stick it onto the wall. Just smooth down the edges even grab your spatula to make sure it's really smooth.

How do you fix a small hole in a wall?


  1. Gather your tools and materials. Below are all of the tools and materials you'll need to complete this project.
  2. Clean the area. This could get messy, so best to place a drop sheet down to protect your carpet. ...
  3. Apply the patch. ...
  4. Apply your plaster. ...
  5. Wait for the first coat to dry. ...
  6. Add another coat of plaster. ...
  7. Paint. ...

How do you fix holes in the wall?

Most read in The Scottish Sun

  • 'ABSOLUTE TRAGEDY' Screams heard after boy, 5, 'stabbed' to death as woman, 49, arrested
  • TRANSFER GOSSIP Celtic duo set for loan moves, Rangers dealt massive Hagi blow
  • BACK TO WORK Nicola Sturgeon confirms work from home end date in huge Covid update. Rebecca explained: "It's awful. "They have just walked out and left me. ...

How do you patch holes in walls?

The report outlined structural problems, trip hazards, holes in doors, damage to walls , broken electrical sockets, evidence of pests, and “the use of a puzzle to cover a missing windowpane in the front door”. Video Player is loading. This is a modal window. Beginning of dialog window.

How to fill holes and cracks in walls?

Plasterboard or Wallboard

  • Cracks and Small Holes. Fill cracks and small holes in plasterboard or wallboard by first digging out any loose pieces of material.
  • Joint Tape. To repair peeling joint tape, first remove the old section of tape. ...
  • Large Holes. To repair larger holes in plasterboard or wallboard, first cut the hole to a rectangular shape larger than the damaged area.


How do I fix a large hole in my wall?

Fix Large HolesStep 1: Cut Out a Piece of Drywall to Use as the Patch. ... Step 2: Trace the Patch Size Over the Hole. ... Step 3: Cut Out the Hole. ... Step 4: Attach Furring Strips Inside the Hole. ... Step 5: Attach the Patch to Furring Strips. ... Step 6: Apply Joint Tape to the Patch. ... Step 7: Apply Joint Compound.

How do I fill a hole in the wall?

3:3012:14How to Patch a Hole in a Wall | Mitre 10 Easy As DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay my plaster's nice and hard. So i'm just about ready to apply my second coat of compound what i'MoreOkay my plaster's nice and hard. So i'm just about ready to apply my second coat of compound what i'm going to do this time is just feather out the edges.

What materials do you need to fix a hole in the wall?

Materials: For this job you'll need a scrap piece of drywall, furring strips, joint tape, drywall screws, and joint compound.Cut out a square piece of new drywall that's slightly larger than the hole.Put this piece on top of the area that needs to be patched, and trace around it with a pencil.More items...

What household items can I use to patch a large hole in the wall?

Mix together one tablespoon flour, one teaspoon salt, and a few drops of water to form a paste. Apply the mixture heavily to your cardboard patch so that it oozes around the square's edges and binds it in place to the drywall. Allow the paste to set, and then pull out the string.

How do you fix a big hole in drywall?

2:286:57How to patch and repair drywall - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll have a rough edge around your cut the sand and wipe it down if there aren't studs behind yourMoreYou'll have a rough edge around your cut the sand and wipe it down if there aren't studs behind your hole attach a 1 by 4 inside your wall and screw your drywall patch to that.

How to fix a hole in a cardboard box?

Start by cutting a thick piece of cardboard into a square that’s slightly larger than the hole you aim to fix. Poke two small holes through the center of the cardboard cutout and thread a short string in through one hole and out through the other.

How to fill a hole in a bathroom sink?

If you don’t have the right paste, grab a bar of soap from the bathroom instead. Simply dampen the surface of the soap with water, then rub the bar over the shallow hole until filled.

How to make a cardboard sanding board?

Push the cardboard through the wall hole, keeping the string ends facing you and ensuring that all corners sit behind intact drywall. Pull the strings tight to hold the cardboard in place. Mix together one tablespoon flour, one teaspoon salt, and a few drops of water to form a paste.

How to fill a small nail hole?

Believe it or not, toothpaste works wonders. When the paste dries, it forms a finish similar to spackle. Just squeeze the white paste ( not the blue gel) into the hole, and smooth it over with a putty knife.

How to make a wall with glue?

Use a toothpick to combine the two, then follow the steps below: Next, follow the steps below: Put on rubber gloves to be sure that this super-strength, fast-drying glue never comes in contact with your skin. Immediately apply the mixture directly to the wall. After it dries, start sanding the hard, plastic-like finish until it’s flush with ...

Is drywall indestructible?

Photo: While drywall is highly durable, it’s not indestructible. Over the years, interior walls take a beating, speckled with everything from nail nicks to doorknob dings. During your tenure as homeowner—or even as an apartment renter—you’re bound to end up with at least one unwanted hole in the wall.

How to make a ragged hole in a wall?

Start by cutting the ragged hole into a neat square or rectangle. Slip one of the 1x3s into the wall cavity and screw it to the edge of the cutout; be sure it overlaps into the hole by 1 1/4 in. Then attach the second 1x3 to the opposite side of the cutout.

How to hide joints in drywall?

Spread a thick coat of joint compound around the edges of the patch. Use the drywall knife to firmly press paper tape into the compound; this will hide the joints. After the compound has dried completely, sand it smooth and apply at least two more thin coats of compound.

How to blend metal patch into wall?

Note: Cover the metal patch with a coat of joint compound. Then gradually feather the edges to blend the patch into the wall.

Can you patch holes in drywall?

No matter how careful you are, live in a home long enough, and you'll find yourself with some holes in the walls to patch. And if a small section of wall is really badly stained or damaged, you'll have to cut out the affected area and cover the hole with a drywall patch.

What to use to repair small holes in a drywall wall?

Purchase spackling paste and a small putty knife if repairing a very small hole. Very small holes are usually caused by nails or screws and can be repaired easily and quickly with spackle.

How to get spackling paste off of wall?

Smooth the spackling paste out with your putty knife. The goal is to make the transition between the wall and the patch as seamless as possible. Using a damp cloth, wipe off any excess spackling paste that may have gotten on the wall around the hole.

What to do if you mess up a patch?

If you mess up the smoothness of the patch, feel free to start over with a bit more spackling paste on your putty knife.

What is the best tool to cut rough patches?

Use your razor knife to make small adjustments to the size of your patch. The sheetrock saw is better for rough in cuts.

What type of board do you use to patch a wet area?

If the area you need to patch is in an area that gets wet, then use a moisture/mold resistance green board.

How long does it take for a patch to dry?

Allow your patch to dry, which should take at least 24 hours. Keep applying thin layers until they are feathered out and smooth. Once dry, sand your patch as needed with a 220 grit sandpaper. Keep going until you cannot feel any seams between the patch and the existing wall.

What happens if lath is damaged?

If some of your lath is damaged so much that it will not hold up plaster, you will need to replace it.

How to make a hole in drywall square?

Cut along the pencil lines with a knife/drywall saw to match the patch. Your hole should now be a square or rectangle shape.

How far away should screws be from drywall?

Keep the screws about 1 inch from the edges of the patch, making sure not to overtighten the screws and break through the paper face of the drywall.

How to smooth spackling compound?

Sand the dried spackling compound with a sanding sponge to smooth the surface, being careful not to over-sand so that the tape shows. Wipe or vacuum any sanding dust.

What to do if playback doesn't begin?

If playback doesn't begin shortly, try restarting your device.

Is it hard to repair a hole in the wall?

From damage due to moving mishaps or wayward doorknobs, a hole in your wall is a fairly common problem. The good news is that it isn’t that hard to repair.

Small Dents and Dings

Scrape away loose debris from the hole. Cover the hole or dent with fast-drying spackle to bring the spackle level with the drywall surface and let it dry 24 hours -- or the time recommended by the manufacturer’s instructions. Sand smooth.

Popped Nail Heads

A popped nail isn't holding in the stud and backs out of the drywall, creating a popped nail head.

Small Holes

For small holes, like those created by a doorknob, a patch kit may be used.

Large Holes

For holes larger than 6 inches, you'll create a drywall patch with a different attachment method for the repair.

Corner Bead Patch

Corner bead is used where two pieces of drywall meet to form a corner. Corner bead is available in a variety of materials, including metal, paper and vinyl.

Finish the Repair

You're almost done. Here's where you make it look like nothing happened.

Repair Textured Drywall

Textured drywall is a bit more complicated, but still pretty simple to repair.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9