Replace the Valve in a Single Handle Faucet.
- Turn off the water to the faucet.
- Remove the plug button from the handle (Fig. 1).
- Loosen the screw underneath the plug button to remove the handle (Fig. 2).
- Unscrew the bonnet counterclockwise to expose the valve and the mounting nut; the bonnet should remove easily by hand (Fig. 3).
- With a large adjustable wrench, loosen the mounting nut, counterclockwise, to expose the valve (Fig. 4).
- Remove the valve from the valve body (the base on which the valve sits) (Fig. 5).
- The new valve will only fit in the faucet in one direction. In the valve body, make note of the two depressions in the metal. Line up the pegs on the ...
Full Answer
How do you repair a Kohler faucet?
- Hold the handle with one hand. Using your other hand, turn the skirt, the decorative flared piece below the handle, counterclockwise.
- Remove any remaining components to expose the valve. Set all parts aside for re-use.
- The valve can now be replaced or other repairs made.
- Reassemble handle parts in reverse order.
How do you repair a Kohler toilet?
- Flush out a Fill Valve on a Two-piece Toilet (article)
- Flush out a Fill Valve on a One-piece Toilet (article)
- If the toilet is not running constantly, but seems to turn on occasionally, see "Toilet Occasionally Leaking or Running" for further troubleshooting.
- Uncertain if the toilet is constantly or occasionally running? ...
- Warranty Information
How to fix Kohler faucet?
Repair. Install a Hose in a Pull-Out Sprayhead Kitchen Faucet. Katun Faucet Stream Breaker Removal. Maxton Faucet Stream Breaker Removal. Remove the Diverter for the Symbol Freestanding Faucet. Removing the Avid™ Single-Control Bonnet and Handle. Replace the Valve in a Two Handle Faucet. Replace Valvet Service Kit Instructions.
How to install a 3 piece Kohler faucet?
Remove the Old Faucet
- Wear safety glasses to protect your eyes from falling debris as you work upside down under the sink.
- Remove the old supply lines and the mounting nuts to remove the faucet.
- Apply a penetrating lubricant if the lines or nuts are corroded or in a hard-to-reach position. ...
How do you disassemble a Kohler shower valve?
0:033:52Kohler Forte Single Handle Shower Faucet Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're going to attempt to fix it ourselves directions suggest putting something over the drain. SoMoreWe're going to attempt to fix it ourselves directions suggest putting something over the drain. So you don't lose any little parts to remove the handle from the color faucet.
How do you take apart a Kohler shower handle?
Firmly grasp the handle. Turn the bonnet counterclockwise and remove the handle and bonnet from the valve stem. Using a Phillips screwdriver, unthread the two screws and remove the handle sleeve, shroud, and faceplate. If applicable, use a flat-blade screwdriver to remove the pin from the adaptor.
How do you replace a Kohler Single handle shower valve?
0:005:22How To Replace A Kohler Shower Faucet Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnything from falling down the drain. Now. Once you get the handle of the trim plate off now you'reMoreAnything from falling down the drain. Now. Once you get the handle of the trim plate off now you're going to find a couple of screws that's holding the bracket that holds the handle on.
How do you tighten a Kohler Single handle shower faucet?
0:221:35Kohler shower handle repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou take these pliers. And place it right on the seam this is just to give you a better grip. AndMoreYou take these pliers. And place it right on the seam this is just to give you a better grip. And then you tighten the screw here while holding the the two pieces in place very firmly.
How do I know what model Kohler shower I have?
You can identify your shower base model number by finding the serial label on your product and then contacting Kohler Co.'s Customer Care Center. The serial number starts with the letter “S” and typically starts with SKB, SKS, or SCK. The serial number is eight or nine characters containing numbers and letters.
How do you repair a Kohler shower valve?
0:0517:01How to replace a Kohler shower valve cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd balancing spool on a single handle kohler shower valve. So here's the kit that you need it's theMoreAnd balancing spool on a single handle kohler shower valve. So here's the kit that you need it's the gp.
How do you fix a leaky single handle shower faucet?
0:172:38Repairing a Leaky Single Handle Tub/Shower Ball-Type FaucetYouTubeStart of suggested clipEnd of suggested clipTurn off the main water supply to your home. For an obstacle remove the index button by prying offMoreTurn off the main water supply to your home. For an obstacle remove the index button by prying off with the screwdriver. Then unscrew the handle screw. And remove the handle.
Where is the model number on a Kohler shower faucet?
The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet. The model number, or part number, is typically preceded by "P/N."
How do I remove the cartridge from my Kohler bathroom faucet?
1:384:19Kohler Bathroom Faucet Cartridge Replacement _Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipOff the water turned off and the socket wrench in place then you want to loosen up the cartridge byMoreOff the water turned off and the socket wrench in place then you want to loosen up the cartridge by turning counter clockwise. If you meet resistance.
How do you fix a loose Kohler shower handle?
0:101:54How to tighten a loose shower handle - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you have a handle on there like that and it's on and it's loose and you want to tighten it up.MoreIf you have a handle on there like that and it's on and it's loose and you want to tighten it up. You can always do that get an allen wrench set fish.
How do you tighten a Kohler handle?
Tighten the HandleTurn off the water supply.Rotate the handle to the "ON" position.Using a 3/32" or 2.5 mm hex wrench, tighten the handle setscrew by turning it clockwise. ... Rotate the handle to the "OFF" position.Turn on the water supply.Rotate the handle to the "ON" position to confirm proper operation.
How do you tighten a Kohler bathroom faucet?
Kohler says you need to hold the handle steady with one hand while you turn the flared piececounterclockwise to remove it from the threaded base. To tighten the handle, turn the flared piece clockwise until it doesn't turn any more.
How do you remove a Kohler faucet handle without screws?
You can use an allen wrench (also called an allen key) to remove it. Once you've done that, you can typically just lift the faucet handle off. However, if it has a cartridge inside, you may need to unscrew a top piece as well to be able to remove the cartridge.
How do you remove the handle on a Kohler bathroom faucet?
To remove the handles for the Forte widespread bathroom or bidet faucet, refer to the following directions. Hold the handle with one hand. Using your other hand, turn the skirt, the decorative flared piece below the handle, counterclockwise. A strap wrench may also be used, taking care to protect all finish surfaces.
How do you remove a Kohler Revival shower handle?
Remove the Handles for the Revival FaucetHold on to the handle while turning the handle base counterclockwise by hand or with a strap wrench, taking care to protect the finish.Remove any remaining components to expose the valve. ... The valve can now be replaced or other repairs made.More items...
How do you take off a shower handle?
You can usually pop this off with a flat head screwdriver. Place the screwdriver head between the cap and the faucet and tap it gently with a hammer, and the cap should pop off. If you have a faucet with a lever-style handle, look for a set screw underneath the lever. You'll need a 1/8-inch Allen wrench to remove it.
What You Need To Know About Removing a Kohler Shower Handle
The handle in your shower, also known as your shower valve, allows you to adjust the water coming from your shower head and tub faucet.
How To Remove a Kohler Shower Handle (4 Steps)
Prep your shower for work by shutting off water to the shower and taking the proper precautions to avoid unnecessary injuries due to slipping or using a tool incorrectly.
FAQs For How To Remove Your Kohler Shower Handle
Remove your shower handle by first removing the diverter button. Once you remove the diverter button, continue to remove the trim. Once you remove the trim, you can remove the pin and adapter (if applicable) to completely remove the handle.
