[Solution] How to Fix a Laptop Hard Drive
- Make sure you are either OK with deleting all the software on the damaged hard drive, or you have all the files backed up before ...
- Download the newest version of the boot CD (see Resources below). You may be able to download the files and save them to a flash drive if ...
- Turn on your laptop with the damaged hard drive and enter your BIOS settings. This may be different from laptop to laptop, so check your ...
- Select the "Hard Disk Tools" section by scrolling with your arrow keys and pressing "Enter." Look for "Partition Tools" and run the ...
Full Answer
Can I get Hard disk of a laptop repaired?
One of the most reliable ways to repair hard disk errors is using a manual disk repair service. EaseUS is authorized by Western Digital, Fujitsu, Hitachi, Samsung, and Toshiba to open and repair their hard drives for data recovery without voiding the warranty. Consult with EaseUS data recovery experts for one-on-one manual recovery service.
How hard is it to change a laptop hard disk?
Preliminary work:
- Connect the new hard disk to the computer via USB port and make sure it is recognized successfully.
- Ensure the hard disk has enough space to hold all data from the current hard drive. ...
- Check out the partition style of the old and new hard disk ( MBR or GPT ). ...
- There is a Demo version for free download and trial.
How do you replace a laptop hard drive?
Physically Swap Your Current Drive with the SSD
- Turn the computer off and remove the back panel. Turn your laptop off and then disconnect both the power cable and any other connected cables -- including the SSD. ...
- Look for any screws securing your drive to the laptop. You'll need to unscrew those before you can remove the drive.
- Lift the old drive up about 30 or 45 degrees and pull it out.
How to replace your laptop hard drive?
With a simple plug-and-play operation, Canvio is one of the simplest methods to add storage to your computer. There is no software to install, so it is ready to use right away with your PC. You can save a large number of files or any other type of content and take it about with you in style. 3. New Intel 4 Cores 8 Thread i5-8279U Processor
Can laptop hard drive be repaired?
If the hard drive is inaccessible, TestDisk is a program that can repair it. Though challenging to use due to its scanty interface, this free little tool proves itself to be a powerful tool to save your hard drive. Alternatively you can use Ontrack EasyRecovery with its SMART tools.
How can I repair my hard disk?
You can fix the 'Disk Structure Corrupted and Unreadable' error by:Unplugging and re-plugging the external HDD or USB drive.Uninstalling and reinstalling disk drive.Running hardware and device troubleshooter.Running disk scan for hard drive errors.Running CHKDSK command.More items...•
How do you fix a disk on a laptop?
0:352:28Computer Training : How to Repair a Laptop Hard Drive - YouTubeYouTubeStart of suggested clipEnd of suggested clipBasically what this is going to do is it's going to run a check disk command on our hard drive andMoreBasically what this is going to do is it's going to run a check disk command on our hard drive and you want to make sure that you have it checked to automatically fix file system errors.
Can HDD hard disk be repaired?
Hard drive repair is possible, but they should NOT be reused after a recovery! Of course, HDDs can be repaired! However, a repaired HDD should not be reused, but rather, have its contents recovered immediately and then be discarded as it cannot be trusted to work into the future.
What causes hard drive failure?
Causes. There are a number of causes for hard drives to fail including: human error, hardware failure, firmware corruption, media damage, heat, water damage, power issues and mishaps.
How do I fix a corrupted hard drive that won't boot?
Fixing “Disk boot failure” on WindowsRestart the computer.Open the BIOS. ... Go to the Boot tab.Change the order to position the hard disk as the 1st option. ... Save these settings.Restart the computer.
How do you fix a disc that won't read?
If your CD/DVD drive is having trouble recognizing a disc:If you know the disc isn't blank, check whether the data surface is damaged. ... Try a different disc. ... Try the disc in another computer's drive. ... Try cleaning the drive with a CD/DVD drive cleaning product.
Why is my disc drive not reading discs?
A dirty or scratched disc surface is the most common reason for a CD/DVD issue when inserted into a computer. Check the disc for damage and confirm that the disc is compatible with your computer. Clean the disc and check for damage: Clean any dust or smudges from the disc with filtered water and a lint free cloth.
How do I fix a corrupted hard drive?
You can fix a corrupted hard drive via CHKDSK command. Type cmd in the Windows search box. Right-click the best match and then choose Run as admini...
Can hard disks be repaired?
There are two types of sectors, a hard and soft sector. In most cases, Windows is able to repair a soft bad sector, as it's almost always related t...
How much does it cost to recover data from a damaged hard drive?
To recover data from a damaged hard drive will only cost you less than $100 with a piece of professional data recovery software, but the prerequisi...
How do I recover data from a crashed hard drive?
Get MiniTool Partition Wizard Pro Ultimate from its official website and install it on your PC. Launch Data Recovery. Then select the partition whe...
How to keep HDD in good condition?
The best way to keep your HDD in good condition is to use the CHKDSK command utility. This utility scans the hard drive, corrects logical sector errors, marks bad sectors that cannot be fixed, and moves data to safe, healthy places on the hard drive. It's a handy tool, but it doesn't operate automatically.
What does it mean when a disk has a bad sector?
When a drive incurs this kind of operational bug, the unreadable parts of the drive are reclassified as bad sectors . When a disk has a bad sector, it doesn't necessarily mean there's anything physically wrong with the disk drive; it usually means that the drive can probably be repaired with software.
How to run check disk utility?
To run the check disk utility on a PC with one drive, enter chkdsk. This command only checks your disk for errors; it won't fix any problems it finds. To fix problems, you must add command switches, which are optional parameters that tell a command-line utility to take an extra step.
Is CHKDSK needed for SSD?
The utility is primarily meant for PCs with hard disk drives, so if you have a computer with a solid state drive (SSD), CHKDSK isn't necessary. SSDs come with a built-in system to deal with errors.
Why is my hard drive corrupted?
Hard drive can become damaged or corrupted due to various hard drive errors like bad sectors on hard drive, file system corruptions. So you must learn these basic tips. After reading this article, you may find that hard drive repair is not so complicated.
How to uninstall hard drive?
Right-click the hard disk with hard drive failure and then click Uninstall device to uninstall the drive. Step 4. Restart the computer and connect the hard drive. The drivers will start installing automatically in most cases. After restarting, you can check if your external hard drive can be read.
What to do if your computer cannot read your external hard drive?
If your computer cannot read your external hard drive, you can connect it to another PC to see if the drive can be read and work normally. If it works, you can make external hard drive repair by reinstalling the device drivers on your computer. Here are detailed steps for you to reinstall your hard drive's drivers.
Can a hard bad sector be repaired?
Formatting the drive will almost always fix this. But, if it's a hard bad sector, this indicates physical damage , which cannot be repaired.
Can a hard drive run into problems?
Hard drives can run into problems sometimes. This article will show you how to make hard drive repair and recover data from a hard drive. When your hard drive needs to be repaired, you can try the top 4 solutions in this article to fix the hard drive.
How to repair a corrupted hard drive?
It can also selectively clean up different partitions to repair the corrupted internal hard drive. 1. Double-click "My Computer/This PC" and then click "Manage". 2. Click "Disk Management" in the list on the left. 3. Right-click on the local hard drive you want to format and select "Format".
Why is my hard drive corrupted?
The hard drive may be attacked by the virus or physical damage due to power failure or unsafe ejection and so on. That makes it corrupts easily, no matter an internal hard disk or external hard drive. Formatting will erase your important data. You may have stored a lot of files there.
What to do if you can't read your hard drive?
If you fail to read hard drive, for an external hard drive, try to plug hard drive into another USB port and open your hard drive again. As for the power check of the internal hard disk, there may be challenges. But if the PC can detect the internal drive, repairing the damaged internal hard drive is independent of the power supply.
How to open a hard drive on another PC?
To do so, you can：. Step 1. Navigate to My PC, right click on it to find Manage and then click on Device Manager. Step 2.
What does it mean when you get a warning when you open a hard drive?
1. When you access the hard drive in "My Computer", receive a warning: "You need to format the disk in the drive before you can use it .". 2. A message of "H: is not accessible. The file or directory is corrupted and unreadable". prompts up when you intend to open your hard drive. 3.
Step 1
Make sure you are either OK with deleting all the software on the damaged hard drive, or you have all the files backed up before continuing further.
Step 2
Download the newest version of the boot CD (see Resources below). You may be able to download the files and save them to a flash drive if your laptop supports it. If not, use your CD burner to make a CD.
Step 3
Turn on your laptop with the damaged hard drive and enter your BIOS settings. This may be different from laptop to laptop, so check your user manual; but it is usually done by pressing one of the function keys (i.e. "F2," "F8" or "F10") or by pressing "Delete." The laptop may actually prompt you with the proper button as soon as you turn it on.
Step 4
Select the "Hard Disk Tools" section by scrolling with your arrow keys and pressing "Enter." Look for "Partition Tools" and run the program named "PTDD Super Fdisk."
Step 5
Check the hard drive for physical defects by choosing the option for a surface test. This will check every section of the hard drive to see if it scratched or somehow physically damaged. Depending on the size of the hard drive, this may take a few hours.
Step 6
Delete all the current partitions and prepare the hard drive for a clean slate. Select the option to "Delete Partition" and delete all the partitions that you see one by one. Follow the onscreen instructions to proceed.
Can human error cause a damaged disk?
Well, there can be any physical damage from drops or deletion of some important files accidentally will result in a damaged disk.
Can I recover data from a hard drive?
There are times when you may end up losing your important data due to hard drive failure. If you are suffering from the same, we recommend using Recoverit. It is an advanced tool that can help you to recover data from a damaged external hard drive. It is so easy to use the tool and all you have to do is plug in your drive into the Wondershare Recoverit and scan the disk to restore your file automatically.
What causes a hard disk to fail?
Hard disk errors are typically caused by power outages, hardware failures, poor system maintenance, viruses, or human error. To fix disk errors, you can use the Chkdsk tool found in Windows operating systems.
How to use chkdsk to fix disk error?
How to Use Chkdsk to Fix Hard Disk Errors. Click My Computer then click once on the hard disk that you want to check, which will highlight it and allow you to select the drive. Right-click on the drive and a window will appear. Click Properties, then Tools from the choices presented. Click Check Now which can be found under Error-checking.
